Question about 1983 Isuzu Pickup

Open Question

Repair seatbelt retractor 0n 84 isuzu pickup - 1983 Isuzu Pickup

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to Reset airbag light


  • Most likely you replaced the clock spring and air bag module right? Well when the srs deploys you also have seatbelt pre-tensioners that are part of the whole retractor assembly and cannot be repaired. Ie either side retractors are not working right , then you need to replace according to chrysler corp.

Oct 09, 2014 | 2006 Dodge Durango Limited

1 Answer

MDX front passenger seatbelt is twisted.


Don't remove the retractor. Remove the bolt just behind the seat and twist the belt

Apr 06, 2014 | 2001 Acura MDX

1 Answer

2005 Chevy Malibu Maxx is throwing codes for both seat belt retractors is there a way to troubleshoot this?


no because a volt meter uses power and that can blow off the charge they did have connector problems so look close to them

Oct 10, 2012 | 2005 Chevrolet Malibu

2 Answers

My rear seatbelt will not retract at all. How can I fix this??


If there is nothing stuck in the retractor that you can pull out to fix the problem, the only other choice is to replace the retractor assembly. This part will be available only at the dealer. (Although most shops will install one for you) It is not recommended that salvage parts be used for restraint systems. I have however, used salvage parts on vehicles where the part was obsolete and no longer available from the dealer.

Apr 08, 2011 | Toyota Corolla Cars & Trucks

1 Answer

Drivers seatbelt is fully extended


My first try is always:
tap lightly & carefully on the retractor housing while pulling & releasing tension on the seatbelt.
If that doesn't work:
Blow compressed air into the retractor mechanism (they accumulate dirt/lint).
If that doesn't work:
Disassemble (and clean) the retractor mechanism. Reassemble with a bit of white lithium
grease lubricant (to prevent a recurrence). This is a bit of work, but it'll always work.

Jan 17, 2011 | 2002 Kia Sedona

2 Answers

Airbags were deployed now seatbelts won't work is there a sensor or are they made to spring


when airbags deploy there are seatbelt sensors in some vehicles.

Jul 13, 2009 | 2004 Ford F150

1 Answer

Saturn vue 2007, rear folding seat will not return to proper position due to seat belt being locked up.


They have a problem with the seatbelt retractor getting jammed up causing the belt to jam & not let the rear seat fold back up.The easiest way to get the seat back up is to cut the seatbelt & fold up the seat.Then the rear seat needs to be disassembled to gain access to the seatbelt retractor assy which has the seat belt made on.Hopefully it's still under warranty or Ext. warranty.hope this helps

May 17, 2009 | 2007 Saturn VUE FWD 4

1 Answer

Seat Belt repair/replace


  1. Remove front seat.
  2. Remove adjuster cover. A
  3. Slide floor anchor cover.
  4. Remove floor anchor bolt. B
  5. Remove shoulder anchor bolt. C
  6. Remove front and rear kicking plate, then remove center pillar upper and lower garnish.
  7. Disconnect seat belt pre-tensioner connector.
  8. Remove the screw securing seat belt pre-tensioner retractor, then remove seat belt and seat belt pre-tensioner retractor.
  9. Remove bolts securing seat belt adjuster, then remove seat belt adjuster. Reverse procedure to install.J

Nov 03, 2008 | 2000 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14381 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...