Question about 1993 Toyota Corolla

1 Answer

How do you remove the drum to replace the back brake pads on a 1993 Toyota Corolla

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 986 Answers

Check out AutoZone's guide at http://www.autozone.com/addVehicleId,1772901/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c1528006f6e3 Also, there is a video at http://84.barrauto32.345.pl/

Posted on Jun 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 Toyota corolla. I just replaced the brakes all the way around a month ago. pads on front, shoes on back. It now makes an awful grinding sound when the brakes are applied and sounds like metal to metal....


You'll have to determine which wheel the sound is coming from and check it again. It could be something hitting the rotor or drum other than the shoes and pads. Like a brake spring or guide.
You can raise each front wheel one at a time and have someone step on the brakes while you listen too. This may turn on the ABS light however.

Feb 16, 2013 | Cars & Trucks

1 Answer

2005 toyota corolla squeaky front brakes when braking at 10mph. changed brakes, rotors, controll arm, pad. What else noise is till there?


anti rattle plates are damaged, remove pads clean rear surface apply thin layer of silicon to pad allowing it to dry then reinstall as per std, this will stop the squeak, or replace anti rattles, silicon is cheaper will last the life of pad, but all new pads will have to be treated the in the same manner .

May 31, 2012 | 2002 Toyota Corolla

3 Answers

I have a 2003 toyota corolla S edition. I need to get the rear brakes replaced, but when I went to the parts store for rotors and pads, they told me I might need drums and shoes. How can I find out what...


The best way would be to remove the wheel and see if you have drums or discs. Disc brakes on the rear will look like the front brakes, as discs are required on the front of 1970 vehicles and newer. You will see the rotor which will be shiny where the pads have rubbed it. On a drum, it will look like a rusty metal bowl facing away from you. If you have custom wheels you may be able to see through the spokes, but dust guards will not let you tell from the back.

Mar 03, 2011 | 2003 Toyota Corolla

1 Answer

Does a 1993 toyota paseo have brake pads on back or drums? and whats the difference?


You will have pads on the front and the back could be either one depending on how the car was ordered. If you have pads on the back you will be able to look through the wheel and it will look like the front. Brake drums don`t have the stopping force of pads. Your front brakes do 80% of your stopping so they are standard equipment on the front. The back don`t do that much so sometimes they use drums because they are cheaper.

Feb 04, 2011 | 1993 Toyota Paseo

1 Answer

How do I remove brake drum on 2005 toyota corolla


Under normal circumstances, the drum should slide right off once the wheel is removed.

If you have built up rust holding it on, there are two threaded holes near the center of the drum to aid in removal.
Insert two 12mm bolts into the holes and, while adding plenty of lubricant, turn the bolts in even amounts until they push the drum off.
Be sure to keep them lubed, as they will strip out easily if not.

If you have aftermarket drums without the holes or the screwholes are stripped out, smacking the face of the drum with a dead blow hammer will help free it up, but takes much longer for success.

Oct 17, 2009 | 2005 Toyota Corolla

1 Answer

2001 Corolla LE Brakes are not strong


Could be many things to look at. 2001 Corolla, assume disc pads in front, and regular drum style brakes in rear. Generally, most of your braking will come from the front disc brakes, and no adjustment is provided in these. Rear drum brakes can be adjusted two ways. Manually, they are adjusted by accessing the adjustment "cog" or threaded rod via a slot in the back of the plate that the drum fits up against. This should be done when the brakes shoes are first installed. As an alternative, the brakes will automatically adjust when you apply the brakes while backing up. I'd suggest that you find a big old empty parking lot, without a lot of light poles to hit, and place car in reverse, get going about 5 MPH, then hit the brakes firmly to stop. Repeat this a dozen times and see what results you get.

I am, of course, assuming that the brake fluid level is good and you see no leaks from either the front calipers or the rear brake cylinders.

Oct 07, 2009 | Toyota Corolla Cars & Trucks

1 Answer

Remove stuck brake drum


you have to get a brake adjusting tool and a screw driver....

put the brake tool in and locate the adjuster wheel, use a screwdriver to release the locking prawl, its tuff but doable.

If there are no access openings to the adjuster, either in the drum or backing plate, then you need to work it off with a few pry bars

Sep 15, 2009 | 2003 Toyota Corolla

1 Answer

1990 Toyota Corolla rear drums bad?


If your pads are completely gone then you may have damaged the drums if you still have any pads left or shoes if they are drum brakes then you still need to have your drums checked out for the proper size to still be there for the brakes to function properly. You won't know until you look at them or are shown them by a pro. who has measured and found them to be beyond reuse! If you had leaks then you will need to repair the brake calipers or the wheel cylinders depending on which system you have drum or disc they are different!!! Hope this helps someway !!
Swampratt200 AAAAEEE!!!!!!

Jul 05, 2009 | 1990 Toyota Corolla

1 Answer

1993 Toyota Corolla rear brakes


While you have the lower spring compressed, reach behind the backing plate and turn the pin to line it up to the slot, instead of turning the spring. Good luck. Hope this helps.

Apr 25, 2009 | 1993 Toyota Corolla

1 Answer

1993 Toyota Corolla rear brake adjustment?


ok to adjust the shoes first obviously have the shoes set up with springs and everthing ready to go ,,then youl see the straight roundish threaded bar running in the middle from shoe to shoe and attached a round piece which can move using a flat head,,but you need to use another flat head to pinch back the little arm thats connected to the piece your adjusting ,,thats just ther to prevent the shoe from moving itself,,youl no when you look what i mean... hope this helps,,,

Apr 24, 2009 | 1993 Toyota Corolla

Not finding what you are looking for?
1993 Toyota Corolla Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...