Question about 1994 Saturn Sl

Open Question

Diagram for saturn L200 2003 serpentine belt - 1994 Saturn Sl

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Mike258
  • 1498 Answers

SOURCE: serpentine belt diagram

fe54db2.jpg

Hope this helps

Mike

Posted on Jul 11, 2008

redlinetech0
  • 33 Answers

SOURCE: 2001 Saturn, need a Serpentine belt diagram

get a floor jack and a small block of wood. place the floor jack under the oil pan. jack up the jack until you feel it on the oil pan. remove the engine mount. you will need a deep 15mm socket and a 6inch extension. the mount has 4 bolts. remove it. then jack the engine up with the floor jack until the power steering reservoir almost touches the cowl. now take a long 14mm wrench and place that on the bolt head on the belt tensioner. pull the wrench until the belt slacks up. remove the belt. Installation opposite of removal. Here is a belt diagram. I hope this helps!! If you have any problems or questions e-mail me at: Redlinetech07@yahoo.com
7744b58.gif

Posted on May 23, 2009

  • 1757 Answers

SOURCE: how to remove and replace a serpentine belt 96 saturn

Click on the following free, direct Link. It has all the Serpentine Belt Diagrams you will need for the 1.9L 4-Cylinder Engine and various Engine Options (AC/No AC etc.), complete with Instructional and Directional Diagrams.

http://www.2carpros.com/car_repair_information/year/1996/make/saturn/model/sl/1996_saturn_sl_drive_belt_routing_diagram.htm

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

"HOW TO":
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

Posted on Apr 05, 2010

  • 1024 Answers

SOURCE: Serpentine belt diagram 2000 sl1

hope you can see it

f077a7d.gif

Posted on May 04, 2010

Testimonial: "Thanks for the reply. The diagram is w/o the power steering pump, but all else is correctly shown."

  • 1 Answer

SOURCE: Serpentine belt diagram for saturn vue 2003 4 cyl.

how do i install serpentine belt

Posted on Sep 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt diagram for 2001 Saturn LW200 (station wagon)?


Go autozone.com type in you make and model it will give you the diagram

Sep 03, 2012 | 2001 Saturn Lw 4dr Wagon

1 Answer

How to replace the serpentine belt on my 2002 Saturn 200 L


We do not have any diagrams which is what you need. So I suggest you use the services of this site. alldatadiy.com

Jun 12, 2012 | Cars & Trucks

1 Answer

Diagram for serpentine belt for a 2000 saturn station wagon 2.2


Try this link. This was as far into the diagram list as I could get with the information you provided. You will need to select the Model of the Saturn, Station wagon is not an option, and the next section should be to select the year then it will show you the different diagrams for the Serpentine and timing belts for all motors installed in the vehicle. You will have to locate the actual diagram you need but it will be there.

Jun 25, 2011 | Saturn SL1 Cars & Trucks

1 Answer

How to remove and replace a serpentine belt 96 saturn


Click on the following free, direct Link. It has all the Serpentine Belt Diagrams you will need for the 1.9L 4-Cylinder Engine and various Engine Options (AC/No AC etc.), complete with Instructional and Directional Diagrams.

http://www.2carpros.com/car_repair_information/year/1996/make/saturn/model/sl/1996_saturn_sl_drive_belt_routing_diagram.htm

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

"HOW TO":
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

Apr 04, 2010 | 1996 Saturn SL

1 Answer

How to replace serpentine belt on 2000 saturn L series not ion


Click on the following direct Link. It has the Serpentine Belt Diagram for the L-Series for your specific engine and options (AC/No AC etc.). It has other additonal diagrams for your future use. It also has diagrams on how to rotate/move the Tensioner Pulley/Arm to loosen and remove the Belt.

Standard Rules to Removal the Serpentine Belt:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT OR OPENING (3/8ths or 1/2 inch square opening) rotating it\moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.

Standard Rules for Installing the Serpentine Belt:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.

b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2000/make/saturn/model/ls/2000_saturn_ls_drive_belt_routing_diagram.htm

Mar 19, 2010 | 2000 Saturn SL

1 Answer

Saturn 2001, serpentine belt diagram


for the most part there is a diagram under the hood unless the label has peel off in a case like that you can ask for a diagram were you are getting the new belt what i do is draw me a diagram before i take the old one off and i have also went to the libaray and there you can get print outs and diagrams of your car.

Feb 23, 2009 | 2001 Saturn SL

1 Answer

2001 Saturn, need a Serpentine belt diagram


get a floor jack and a small block of wood. place the floor jack under the oil pan. jack up the jack until you feel it on the oil pan. remove the engine mount. you will need a deep 15mm socket and a 6inch extension. the mount has 4 bolts. remove it. then jack the engine up with the floor jack until the power steering reservoir almost touches the cowl. now take a long 14mm wrench and place that on the bolt head on the belt tensioner. pull the wrench until the belt slacks up. remove the belt. Installation opposite of removal. Here is a belt diagram. I hope this helps!! If you have any problems or questions e-mail me at: Redlinetech07@yahoo.com
7744b58.gif

Feb 23, 2009 | 2001 Saturn SL

2 Answers

Serpentine belt


ok, i just sent it

Jun 08, 2008 | 1994 Saturn Sl

3 Answers

Serpentine belt diagram


fe54db2.jpg

Hope this helps

Mike

Jun 08, 2008 | 1994 Saturn Sl

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...