Question about 2003 Toyota Corolla

Open Question

4zz eng flywheel tourqe settings - 2003 Toyota Corolla

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flywheel keeps breaking


By breaking I assume you mean into pieces? The only thing that would cause this is a badly misaligned transmission. Any other problems would cause such vibration you would not drive the vehicle .

Oct 14, 2015 | 1986 Ford Ranger 2WD

1 Answer

How do I tighten crank shaft of Toyota corolla 1,4 4zz engine(tightening toque value)


4zz , first post ever with some one how knows what is there
bravo that. but skips year, so is it a 2000 year?
what country? this is a USA web site, so...... what country.

  • 2000 - 1.4 L (1398 cc) 4ZZ
year 2000? corolla.
so says wiki,
crank pulley, big nut torque.
ill log in for you, and read, just because you said 4zz (rare)
ahh, cwap, only 4 engine used here, non, 4zz
80 to 102 ft/lbs for all non 4zz
i can find in usa, so I googled for you
and 1st hit , landed this, im I a magic typer?

http://www.andriuz.skynet.lt/soft/auto/corolla/COROLLA%20ENGINE%20&%20CHASSIS%20MANUALS%20&%20SUPPLEMENTS/COROLLA%20ENG%20MANUAL%203ZZ-FE%20%26%204ZZ-FE%20RM928E32.pdf

102 it says.
i recommend buying a real FSM for your car , for your country.
and WIN.

Nov 08, 2014 | Toyota Cars & Trucks

1 Answer

Tourqe converter bolts dont line up


possibly wrong torque convertor or flywheel

Dec 25, 2013 | 1991 Plymouth Grand Voyager

1 Answer

HOW TO SET CAM TIMING ON TOYOTA RUNX 4ZZ



Information how to set timing for toyota corolla 4zz engine.

Jul 21, 2012 | Toyota Corolla Cars & Trucks

1 Answer

Replacing the transmission in my 2000 chevy truck 5.3 four wheel halfton got the tranny and the tourqe converter is still on the flywheel but can't figure a way too loosten the tourqes holding it to...


You'll need a box end wrench and a pry bar. Use the pry bar to hold the ring gear against the motor while you use the box end wrench to remove one bolt. Then rotate the engine with the bar to bring the next bolt around to where you can get the wrench on it. Repeat until you have the bolts off. Do not lose those bolts. If you do they will have to be ordered at the dealer.
When you put the torque convertor back in the transmission it has to go in two steps. It will slide in so far and then you will have to turn and push until it goes in again. If you don't do this the trans will not mount flush with the engine. When it's in the transmission properly it should sit about an inch inside the housing. Hope this helps.

May 06, 2011 | 1999 Chevrolet K1500

1 Answer

Where is the flywheel located on this truck


its in the bell housing on the transmission the flywheel is bolted to the crankshaft and either the tourqe converter or clutch is bolted to that.

Dec 16, 2010 | 1998 Dodge Dakota

1 Answer

Tourqe specs for an 07 jeep wrangle flywheel


1. Position the flexplate onto the crankshaft and install the bolts hand tight.
2. Tighten the flexplate retaining bolts to 95 N·m (70 ft. lbs.) in the sequence shown.
3. Install the transmission.


4687c60.gif

Sep 24, 2010 | 2007 Jeep Wrangler Unlimited Rubicon 2...

1 Answer

Engine removal


What is your question.? It should come out with the converter still bolted to the eng flywheel. If your pulling a front wheel drive vehicle motor you drop the trans out the bottom first, then pull the engine. You can also drop both together by dropping the support cradle. That is the best way and the way it was built and done in a dealership in some cases. Trans got go to have roon

Sep 28, 2009 | 1997 Cadillac DeVille

2 Answers

Need tourqe settings


I do belive it is 18 ftlbs.

Mar 22, 2009 | 1993 Chevrolet Lumina

Not finding what you are looking for?
2003 Toyota Corolla Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...