Question about 2008 Suzuki SX4

Open Question

Where is my upstream oxygen sensor on my 2008 Suzuki sx4?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Molson02536
  • 3854 Answers

SOURCE: I'm trying to locate the spark plugs in my suzuki 2008 sx4.

You remove the rectangular plastic cover on top of the engine(2 screws), under that is the plug wires and spark plugs. Pull wires straight up, remove plugs with proper spark plug socket, extension and ratchet, reverse to install.

Platinum plugs are not required but will allow longer change intervals. Check the gap but do not gap them, if they are not properly gapped. Bring them back and asked for new ones.

The metal's on the Platium plugs are harder then copper plugs and can break upon trying or break in your cylinder when in uses.

Good luck and hope this helps

Posted on Apr 13, 2009

csmock132
  • 4669 Answers

SOURCE: How often should i change my oil in a suzuki sx4

every 3000 miles or 3 months. You should change it before the light comes on. Unless you are using synthetic oil.

Posted on Apr 10, 2010

  • 2 Answers

SOURCE: 2007 suzuki sx4 emission control light on. 17000 miles

My light in my 2007 SX4 just came on. Apparently my oxygen sensor is wrecked... allegedly from oil dropping on it during oil changes. Did the light come on after the most recent oil change?

Posted on Jun 26, 2010

  • 1207 Answers

SOURCE: where is the knock sensor located on my 08 suzuki sx4

The P0327 means Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor).
the knock sensor is located in the front of the engine located behind the oil dip stick just to the left.
_______________
Ktag K-TAG

Posted on Oct 23, 2012

  • 6 Answers

SOURCE: keyless remote not working on my suzuki sx4

think it may be a new battery in key fob had same prob with mine and used other spare key and works fine now ..

Posted on Feb 12, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change upstream o2 sensor on 2008 chevy uplander 3.9l ?


  • 1 Warm up the engine for about four minutes to bring it to operating temperature. Then turn off the engine. This will avoid damage to the exhaust pipe threads if that sensor has seized to the pipe.
  • 2 Find the oxygen sensor or sensors you need to replace. The upstream sensor is located near the exhaust manifold and the downstream sensor on the back exhaust pipe, close to the catalytic converter.
  • 3 Disconnect the oxygen sensor electrical connector. Depending on your particular Chevy model, both sensors may be disconnected from the engine compartment.
  • 4 Lift the front of your Chevy model to reach the sensor you need to change, if necessary. Use a floor jack and two jack stands to support it.
  • 5 Remove the oxygen sensor using a box-end wrench or a ratchet and oxygen-sensor socket.


  • Read more : http://www.ehow.com/how_5159092_replace-oxygen-sensor-chevy.html

    Jul 23, 2014 | Chevrolet Chevy Cars & Trucks

    2 Answers

    How to remove the knock sensor on a 2008 suzuki sx4


    Best Manuals


    for the best solution of your problem visit this site

    Jun 03, 2014 | 2008 Suzuki SX4

    2 Answers

    2009 suzuki sx4 window fuse


    On this website you find fuse box diagram and description for Suzuki SX4

    Maruti Suzuki SX4 Petrol fuse box diagram Auto Genius

    May 02, 2014 | 2008 Suzuki SX4

    1 Answer

    Light engine on the 2008 suzuki sx4. replaced the front 02 sensor and plugs. still light stays on and says 02 senor could be the problem.


    There are several O2 sensors. There 's the sometimes from 2 to 4 on each vehicle. They are located at the pipes before they get to the catalytic converter and after. It may be that the one you replaced is good but one or all of the others are not good.

    Mar 14, 2014 | 2008 Suzuki SX4

    1 Answer

    Where is the knock sensor located on my 08 suzuki sx4


    The P0327 means Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor).
    the knock sensor is located in the front of the engine located behind the oil dip stick just to the left.
    _______________
    Ktag K-TAG

    Oct 22, 2012 | 2008 Suzuki SX4

    1 Answer

    Where is the suzuki sx4 heater sensor located? i have a "HO2S Heater Control Circuit Low (Bank 1 Sensor 2)" problem and do not no where to find that sensor or how to fix that problem


    That is an error for a heater oxygen sensor (H02S). It's located on the exhaust pipe after the catalytic converter. If you have a 4 cylinder, there will only be one catalytic converter so it will be pretty easy to figure out which sensor to replace. If you have a 6 cylinder you will have to determine which bank is Bank 1 and which is Bank 2. If you can find a cylinder identifiction diagram bank one will be the side that cylinder # 1 is on. Whenever i have encountered a similar code it has always been a bad oxygen sensor. So, inspect the wiring to the sensor and if all checks out, replace the sensor.

    May 20, 2010 | 2008 Suzuki SX4

    3 Answers

    2007 suzuki sx4 emission control light on. 17000 miles


    maybe the sensor is faulty, only having 17k miles on it i'm guessing that is what it is, get it looked at or changed

    Feb 04, 2010 | 2007 Suzuki SX4

    2 Answers

    2007 Suzuki sx4 engine light on after oil changed, How to turn it off?


    The solution is that when the oil filter is removed, oil gets on the O2 sensor and ruins it. Must cover the O2 and that keeps the oil off. To keep the check engine light off, is to replaced the O2 sensor. Problem solve. Later on sx4's they move the O2 in a different spot. I work on Suzuki cars. Don

    Jan 06, 2009 | 2008 Suzuki SX4

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    31 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Boyet Soriano
    Boyet Soriano

    Level 2 Expert

    293 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...