Question about 2008 Dodge Ram 2500
What is the torque spec for 2008 dodge 2500 6.7 deisel front wheel bearing
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
can it not be done without removing the hub ?? dont think you can get hub off without removing the track control ball joint?do you have the right tools??
Posted on May 30, 2009
go to autozone.com and set up a free account. You will then have access to vehicle repair guides and can get all the info and diagrams you need. Hope this helps!
Posted on Jan 02, 2010
There is no torque specs,this nut has to be tightened back like it was ,the best thing to do,was,to late now,is to use a torque wrench to remove the nut,and remember the torque,and when replacing it,torque it back to that spec,the reason being,there is a crush sleeve between the front pion bearing ,and the rear pinion bearing,and it has to be crushed to a certain amount,to aquire deepness into the ring gear,anyway just give it about 25 lbs torque,any more the crush sleeve will crush even more and the deepness of the pinion will be too much.
Posted on Apr 19, 2010
Tips for a great answer:
Tighten the spindle nut to 149 ft-lbs to seat the bearing then
. rotate the axle 5 to 10 times to seat the hub bearing, then
tighten the spindle nut to a final torque of 263 ft-lbs I would just use a good impact gun to get it there.
Oct 15, 2016 | Dodge Cars & Trucks
Oct 01, 2014 | Cars & Trucks
Mar 23, 2014 | 2008 Infiniti G35
Mar 23, 2014 | 2004 Dodge Ram 3500 Truck
Jan 28, 2012 | 2008 Dodge Ram 2500
Jan 29, 2011 | Dodge Ram 2500 Cars & Trucks
Dec 31, 2010 | Chevrolet Silverado 2500 Cars & Trucks
Oct 16, 2010 | Dodge Ram 2500 Cars & Trucks
Feb 06, 2010 | 2004 Dodge Ram 2500
Oct 05, 2009 | 2003 Dodge Dakota Club Cab
53 people viewed this question
Usually answered in minutes!