Question about 2004 Ford Freestar
First off we need more info Is the check engine light on have you checked for vac leaks does the air intake tube have a hole or crack in it does it try and idle or does it just die the c/e light should be on could be the idle air control valve check all that stuff and let me know what ya find
Posted on Jun 02, 2014
Check for a vacuum leak
Posted on May 30, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Please don't forget to rate:
Bleeding The Brake System Bleeding When any part of the hydraulic system has been disconnected for repair or replacement, air enters the lines causing spongy pedal action (because air can be compressed and brake fluid cannot). To correct this condition, it is necessary to bleed the hydraulic system to ensure all air is purged.
Always begin bleeding the brake system from the furthest wheel cylinder or caliper from the master cylinder; the right rear.
NOTE: The right side of the vehicle is the passenger side. The sides of the vehicle are determined from the driver's perspective. This reference is taken from sitting in the driver's seat, facing forward.
Maintain a full reservoir during the bleeding operation. Never use brake fluid that has been drained from the hydraulic system, or from an open container, no matter how clean it is. Always use brake fluid from a new, sealed container. The front and rear reservoir will drain as the front or rear brakes are bled.
Posted on Jul 22, 2009
If you log on to Auto Zone and create a account with that car you can find the belt routing for the car. I just did one that the belt routing sticker was missing from under the hood and that is how we figured it out.
Posted on Dec 08, 2009
A good place to start is a ford dealer. Often they can cut you a key off the VIN number. You will have to go there in person., and some kind of proof of ownership would be needed!
Posted on Apr 02, 2010
Tips for a great answer:
Jan 31, 2013 | 2001 Ford Taurus
May 17, 2012 | 2001 Ford Taurus
Jan 28, 2011 | 2001 Ford Taurus
Nov 24, 2010 | 2001 Ford Taurus
Dec 22, 2009 | 2001 Ford Taurus
Jun 29, 2009 | 2000 Ford Taurus
Apr 21, 2009 | 2001 Ford Taurus
Mar 09, 2009 | 2001 Ford Taurus
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: