How to reset ABS light on corolla 99 model - 1999 Toyota Corolla

plug it in with diagnostic to see which side is the the problem

your main big fuse is blown.
i think its either 100a or 120a depending on model

You will need a ABS Scan Tool for your make and model.

hi. usually after any repairs to abs you have to reset the lights.

Could be your brake fluid is low or your abs sensor is bad,here's a link to your sensor.

ABS was optional on S and LE models. Don't know if it is 4 wheel or not. You could count the lines coming out of the ABS pump if the car has one.

There are many things that can cause your ABS light to come on. Some are serious, so you should never just ignore the light.
But there are times when the light comes on and can be met with a simple solution.
For instance, a dirty ABS wheel sensor can cause the system to trigger the ABS light during self evaluation.
You'll be shocked when you see how much road gunk can accumulate on this very important sensor.
Even if your ABS light hasn't made an appearance, it's a good idea to clean the sensor.
A good time to do it would be during brake pad replacement when you have the wheels off anyway.

CHECK THE ABS RELAY IF STUCK CLOSE IT WILL KEEP ABS LIGHT AND MOTOR RUNNING.

I would say that you have a problem with the ABS and the light will keep coming back until you fix the problem.
Get it scanned for error codes.

Regarding the corolla abs light, you need to get your local dealer to diagnose the fault, it is possible a wheel sensor giving a faulty reading but while the abs light remains on you have no abs. Worth getting it looked at promptly