Question about 1999 Dodge Ram 2500 4WD

1 Answer

Changed starter now windows and a/c blower does not work

Posted by on

  • JEFFREY
    JEFFREY May 17, 2014

    and also have abs light on but can jump the starter and it will work

  • JEFFREY
    JEFFREY May 17, 2014

    is there a fuseable link that could be the problem or what i am lost and cant figure out what is going on here

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I don't know that the started had anything to do with windows and a/c not working, but the starter is connected to the power of the vehicle, so it is possible there was a surge or short that blew a fuse or two, check the fuse boxes inside the cab and under the hood

Posted on May 17, 2014

  • 2 more comments 
  • JEFFREY
    JEFFREY May 17, 2014

    have have check in both places and cant find any blown fuses what so ever and the only way the truck will crank is if u jump the starter im am wandering if there is a in line fuse somewhere that runs off of

  • Don Ribble
    Don Ribble May 17, 2014

    Starter Relay?

  • JEFFREY
    JEFFREY May 17, 2014

    i have taken it out and swap with my trailer lights relay and nothing but trailer light relay spot is telling me they both r good

  • JEFFREY
    JEFFREY May 17, 2014

    but keep in mind the a/c compressure u can hear kick on after i jump the starter and get it running but the blower wont work nor the power windows and the speedo does not either

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 dodge ram van 3500 starter engages while engine is running only in park or neutral. Had to pull starter relay to disengage starter, also starter relay somehow connected to blower motor high speed


Check ignition key switch wiring. Could be a short between blower motor wiring and starter wiring. Try switching on high speed blower when ignition is on only (not started). If the starter cranks, then there is surely a leakage/short in the wiring.

Dec 28, 2016 | Dodge Ram 3500 Cars & Trucks

1 Answer

CHANGED STARTER NOW A/C BLOWER POWER WINDOWS AND ABS LIGHT ON


You grounded starter wrong or bad ground in starter from remanin box not your fault if reman but the ground is small wire and could get crossed under nieth

May 17, 2014 | 2006 Dodge Ram 2500

1 Answer

04 trailblazer windows,locks dont work


use a code reader to reset the CPU for a starters and see if there are any codes recorded.

Dec 22, 2013 | 2004 Chevrolet TrailBlazer

1 Answer

Why after changing the starter in my 81 corvette does the blower motor and wipers not work? there is power to both


you should have two power wires coming off the starter one to the battery and one to the alternator make sure you hooked them both back up

Sep 26, 2013 | Cars & Trucks

1 Answer

Blower motor doesn't pump well even the fan switch on high


sounds like blower bearings are dried out and will eventually lock up the blower..sometimes you can spray wd40 in the blower bearings and it will work fine for a while.. also check vacuum controls to the baffle dors in the ductwork..may have some leaks there.. should hear a slight hissing if really bad..repost findings

Feb 09, 2013 | 2005 BMW 545i

1 Answer

I have a 2005 Renault Modus 1.4 16v that is not starting. The starter doesnt even engage. There are a bunch of other weird faults too.


I think you should check the wiring and grounds. These many problems all at same time happens due to wiring only.

Truck Performance Chips

Nov 07, 2012 | Renault Cars & Trucks

1 Answer

98 dodge caravan won't star intermittenty


1. Check the Battery Terminal Post connections. Use a Battery Brush to clean (both the terminal post as well as the connecting rings) and make sure they are tight. If one is already loose dirty (not shiny metal) then it could cause intermitten non-starts.
2. Check the Starter Relay located in the IPM (fuse box) located in the engine compartment. The cover has the what relay is what. Relays that are the same can be switched and the functions checked. For example: the Rear Blower Relay is (should be the same as the Starter Relay. If the Rear Blower works (all the time) switch the Rear Blower Relay and Starter Relay. Check the Rear Blower several times (on and off). Check the Starter several times (on and off). If the Rear Blower works only intermittently and the Starter works all the time now, replace the bad relay. Don't switch back until you obtain a new relay.
3. I could also be the connections to the Starter Solenoid that have become loose or corroded.
4. It could also be the Starter Solenoid or the Starter Motor. If it is the Solenoid: with a partner-short jump (with a short-well insulated wire) the positive connection from the solenoid (small cylindrical body) to the starter body (large cylindrical body while your part turns the ignition to start. If it starts right-up, then the solenoid is bad.
5. You cannot (normaly) replace just the solenoid. Purchase a new or remanufactured Starter (which comes complete with the Solenoid) and replace the old Starter.
Good Luck and let me know if this worked or if you have additional information to clarify or need additional information.

Nov 24, 2009 | 1998 Dodge Caravan

3 Answers

A/c blower not working


Check fuses and relays (refer to the owners manual for location). If everything checks OK, take a test light and check your wires leading to the blower motor to verify you're gatting power. If so, replace the blower motor. If no power to motor, your problem will be in your switch.

Jun 10, 2009 | 2000 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...