Question about Chevrolet Silverado

2 Answers

1985 Chevy Silverado. Truck has 4 headlights. When I pull the headlights on, only one headlight works. Turn on high beams and that light goes out and one on the other side comes on. None of the lights appear burnt out and All fuses are good. Replaced the interior headlight circuit(behind the pull knob) and no change.. any suggestions???

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 242 Answers

Maybe you have blown your low beam replace your bulbs

Posted on Jun 10, 2015

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Chevrolet Master
  • 1,224 Answers

Button floor click or pull turn signal towards you easily
relay is on

Posted on May 17, 2014

  • Angie May 19, 2014

    Did this. Same problem.

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

savindude
  • 175 Answers

SOURCE: headlights wont work on 2000 chevy silverado

Headlight switch on dash???

Posted on Jul 05, 2009

johnjohn2
  • 5763 Answers

SOURCE: Headlight problems

may have a bad switch, if highbeam indicator stays on i would replacing the multi fuction swith.

Posted on Nov 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights wont work on dim, only bright


Check your head light bulbs, your truck has the dual filiment headlight bulbs one per side which does both high beam and low beam, 9007 bulbs.
If the low beam filiments are burned out only the high beam will work.
Also look into finding out if the headlight switch is gone bad.
The headlight module and or drl module maybe defective.

Jan 24, 2014 | 1996 Ford Ranger SuperCab

1 Answer

Low beams not working but high beams are on a 2000 chevy metro


The headlight relay provides power to the dimmer relay, then power goes thru a fuse for each light for each circuit (4). The low beam fuses are in fuse block 2. The dimmer relay is controlled by the daytime running light module. The headlight and dimmer switches send signals to the DRL module. You may need a shop manual to troubleshoot the circuits.

Jan 24, 2014 | 2000 Chevrolet Metro

1 Answer

Is my 2007 Lincoln Navigator (HID headlights) equipped with HIGH BEAMS? If so - they don't seem to work. Allow me to explain; 1. The headlights come on automatically in low light conditions. 2. The...


First of all are your headlights a double filament type headlight? If yes then I would suspect that a power wire to the high beams is broken or shorted. If your high beams are a separate set of lights from your regulars running lights then either the high beams headlights are missing. or has a broken power wire or shorted or...You could check the fuse box under your dash and under the hood of the car to see if you have a fuse for the high beam lights.

Oct 28, 2013 | Cars & Trucks

1 Answer

Cant find headlight fuse 1992 chevy suburban


If the high beam lights work by pulling on the dimmer switch, you are bypassing the headlight switch.
There should be a circuit breaker inside the headlight switch which could be faulty.

Feb 09, 2013 | 1992 Chevrolet Suburban

1 Answer

I have a 1983 Chevy S10 pickup. With headlights off all gauges work normal. When you pull the headlight switch on all the panel lights except the windshield wiper switch locator light never turn on and all...


take a look at the dash ground wire located next to the right of ebrake release handle. if the bole holding the ground wire is loose, which was quite common it will cause all kinds of feed back problems, like described in the comments section to your question.

Dec 11, 2010 | 1983 Chevrolet S-10

1 Answer

My 87 k5 blazer headlights don't turn on when the car is started and running any more... all 4 headlights turn on fine when I pull the lever all the way out for high beams


The vehicle should not have to be running for head lights to burn.If high beams work,then the low beam head lights could be burned out,even though they light up with high beams.The dimmer switch,can be the problem if the head lights only work on high beam.

Dec 12, 2009 | 1987 Chevrolet Blazer

2 Answers

Headlight problems


Hi. That sounds like the Low/high beam switch is malfunctioning and in need of replacement. I believe this because the headlights will not come on no matter which power source is attempting to activate them. Clearly, they are not getting power. Since the high-beam indicator light is functioning and indicating HIGH BEAM it IS getting power, There is no further interruptions in that circuit, save the fuse. IF the fuse is good,.. tested good.... Then the switch is bad, if the fuse is bad... replace it. If this doesn't solve the problem You have blown all your headlights simultaneously, or lost all the connectors to the headlights all at once, or possible got so unlucky as to lose all connectivity to just the headlights magically. I'd bet the fuse if I didn't believe that you would have checked that before posting the question here, and that doesn't account for the indicator to be stuck, so.... This pretty much leaves the switch ol buddy, sorry.

11_25_2012_9_16_05_pm.jpg

Nov 28, 2009 | 2002 Chevrolet Silverado 2500HD

1 Answer

Headlights wont work on 2000 chevy silverado everything else works. The high beam light will even show up on bright.The running lights work. Headlights just wont come on.


Check the fusible links under the hood. Also, double check the bulbs are in fact good. Lastly it could be a defective daytime running light relay.

Aug 04, 2009 | 2000 Chevrolet Silverado

2 Answers

1993 Chevy Silverado truck headlights high beam only works no low


dimmer switch has gone bad need to change your dimmerswitch

Apr 01, 2009 | 1993 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...