Question about 2007 Ford Fusion I4 SEL Sedan

Open Question

Why wont the car accelerate with a code 100 - 2007 Ford Fusion I4 SEL Sedan

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2012 sonata car wont accelerate while driving , while driving the car sometimes it wont accelerate it kids of stalls and then it picks up

have the fault codes read
check the accelerator position sensor or throttle body motor / sensor for problems

May 29, 2017 | Cars & Trucks

1 Answer

My car wont accelerate

Could have trashed the throttle body or gas pedal sensor. It is drive by wire. Have the codes read. A TPS code is the throttle, An APP code is the gas pedal. Neither are cheap.

Jun 04, 2016 | 2005 Toyota Avalon

1 Answer

Gti mkv 2007 epc and mill light on

run fault codes to find the fault. It may be the throttle position sensor (replace accelerator pedal)

Nov 09, 2013 | 2007 Volkswagen Golf 2.0

1 Answer

95 nissan pathfinder has bad mpg, dies, and jerks

Anytime the check engine light comes on, you check the computer for trouble codes. The codes will not tell you what to replace, but rather what to check.
Let me know what you find out.

Aug 24, 2012 | 1995 Nissan Pathfinder

1 Answer

Intermittent Skip under light acceleration

May still be a bad coil that just hasn't reached the number of misfires to set a trouble code.

Jul 28, 2017 | 2001 Lincoln Town Car

1 Answer

My audi 100 1991 won't accelerate when warm. The

When you say wont accelerate does the RPM flares that would be the transmission slipping, or you step on the pedal all the way and the vehicle has lack of acceration you can hear a hissing noise that would be a plugged exhaust.Here the thing you related it to fuel has the problem on the ignition coil is a powerstage if this stage acts up it allows you to accelerate you just dont go anywhere it back fire through the intake that would be the power stage it located on the ignition coil

Mar 10, 2012 | 1991 Audi 100

1 Answer

Car wont accelerate when going up hills and sometimes when depressing accelerator the car wont respond,its sluggish,Any ideas on what is causing this sluggishness?

May be a clogged catalytic converter, that will cause the exact problem. Also a throttle position sensor may cause this but will most likely set an engine code. If the check engine light is lit you should have the car scanned for codes. Scan it for codes even if it's not lit as it may have stored codes in history. Hope this helps.

Oct 15, 2011 | 2000 Chevrolet Blazer

1 Answer

The problem with 2002 nissan altima is ,whenever the battery terminal is removed,the car wont accelerate,so i used my scanner to detect the faults,and it shows me some fault codes,e.g. (...

your continually removing the battery terminal is what is causing the problem
the ECM cpu program is continually being corrupted by the terminal removal and when you wipe the codes ( read it as reset the ECM) it works fine until you touch the terminal again
permanent solution is ---leave the battery terminal alone

Jul 01, 2017 | 2002 Nissan Altima

Not finding what you are looking for?
2007 Ford Fusion I4 SEL Sedan Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides