Question about Lexus LS 460

1 Answer

Parking brake not available? "check parking breake system lights, what is the problem??

Posted by on

Ad

1 Answer

When you have the vehicle checked for codes
& the Parking Brake System tested ,you will have your answer

Obviously there is a system fault eg: it isn't working correctly or
at all

Posted on May 16, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 116 Answers

SOURCE: Dash board parking brake and ABS lights stay

you have an abs fault. have your abs system scanned for codes.

your base brakes will continue to function normally

Posted on Apr 13, 2009

  • 88 Answers

SOURCE: PARKING BRAKE LEVER- NO TENSION / DISC BRAKE ADJUSTMENT-OFF

If you remove the cover of the E-brake there should be a tention ajustment that you can do yourself.

Posted on May 19, 2009

mechanicm639
  • 253 Answers

SOURCE: Parking break light is on & Chimming When P. Break is released

On your parking brake assembly is a single wire switch. You can unplug it, but you will have to remember not to drive with it set. To replace the switch the whole assembly will have to come out. The switch is about $20 and labor should run about two hours. Good Luck

Posted on May 20, 2009

greg_margo
  • 1959 Answers

SOURCE: parking brake release

There should be a manual release. Reach up along the parking brake pedal. Ford has a manual lever that you pull toward yourself to release the parking brake. Hope this helps our with your problem. Best of luck.
Greg

Posted on May 30, 2009

  • 12650 Answers

SOURCE: gmc yukon has the abs & parking brake light

you have to fix the problem with ur brakes- first check the wiring ,connectors and connection clips to the abs sensors and modulator if looks ok than have truck scanned some auto stores such as auto zone / advanced auto do it for free the code will give u a start point towards fixing ur problem--visual inspection of brakes doesnt always show problem

Posted on Nov 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the parking brake light stay on in my 2006 mira i alrady checked the brake fluid and hand brake system but problem is stil there kindly advice


Parking Brake Warning Light - RepairPal

repairpal.com/parking-brake-warning-light
  • As long as there are no problems detected in the parking brake system, the parking brake light will stay on until the parking brake is completely released.

Oct 08, 2015 | Cars & Trucks

1 Answer

1998 dodge dakota break light is on in dash


Sounds like you need a brake job performed and the system completely checked over. Check the brake fluid level in the master cylinder, and also make sure your parking brake is not applied by pulling the parking brake release lever.

Oct 07, 2012 | 1998 Dodge Dakota

1 Answer

Why does the parking break light stay on in my 97 Olds Cutlas Supreme. I have checked the level of the break fluid and it is full. I did have new break lines put in last year. I did have to slam on my...


Apply the parking brake with the vehicle parked, engine turned off and transmission in Park. Release the parking brake completely, then apply it again, and ensure that it is fully released. Turn the ignition on, check to see if the Parking brake warning light is on. If it is NOT on, apply the parking brake and check to see if the warning light comes on. If the light come ON wihen the Parking brake is applied,.....fully release the parking brake and check if the warning light goes OFF. If it does NOT go off, then an adjustment is needed at the parking brake switch.

Jan 09, 2011 | 1992 Oldsmobile Cutlass Supreme

1 Answer

Why does my engine sometimes goes off when breaks are applied?


Well this could be a number of things. A rusty gas tank. A bad fuel filter or pump. A short in the brake light system. I would try this. In a parking lot Empty parking lot . While moving Try just lightly touching the brake pedal just enough to engage the Brake lights and see if it does want to stall. If it does i would check the brake light system. Was there an alarm system installed? The lights are connect to it. That's the first thing i would check. Most alarm installers tend to tap into wires for power under the dash that they really shouldn't. This could cause all sorts of problems.

Jan 06, 2011 | 1998 Dodge Durango

2 Answers

Park break light stays on sometimes


Check the parking brake light switch which is located under the center module, remove the cover around the parking brake and you'll find it there.

May 21, 2010 | 2003 Nissan Frontier Crew Cab

1 Answer

Break light on dashboard is on constantly and keeps beeping, don't know why it is on!


Check brake fluid level could be low, if not low disconnect brake light switch at master cylinder sit on side of master if light goes off replace that switch if light stay on check parking brake switch at parking brake peddle.

Jan 07, 2010 | 1994 Buick Park Avenue

2 Answers

My (brake) light turns on in the dash and wont go off what can it be?...


This light can be caused by your parking being on. If not, it's most likely caused by low brake fluid. Check the fluid level under the hood and fill it up if needed. If that doesn't get rid of the light, you should have it towed to a dealer and don't drive as your brakes may fail at any moment without notice

Aug 25, 2009 | Chevrolet Lumina Cars & Trucks

1 Answer

Parking brake light keeps turning on and off


I would check the brake fluid level first. If that is ok and you have more than 100K on the brakes check to see if they need to be replaced.

Aug 17, 2009 | 2003 GMC Sierra

1 Answer

Parking break light is always on (1994 Toyota Previa)


If you look where the parking brake arm is you should se a switch that it pushes against . The switch should be right above the parking brake arm .

Feb 23, 2009 | 1994 Toyota Previa

2 Answers

Parking brake light


Hows adjustment on parking break cable ? It should be adjustable from above if too tight.

Feb 16, 2009 | 2001 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

907 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...