Question about Chrysler Concorde
The code will have to be reset at a garage. They have a small computer that plugs in near you fuse box, finds the code and resets it(turns it off). Hope this helps you
Posted on May 16, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: jeep codes location of unit
Got me a complete manual for 199 jeep factory model and found location of each individual unit in question. Manual gives u possible solution to each code and repair and or replace. As a mechanic myself testing, trouble shooting and repair was not that difficult. Shift solenoid was very difficult to get to. Located under the head lamp passenger side.
Posted on Nov 19, 2008
The batery is located in the right side finder. You have to pull the wheel and you will see the cover for it toward the front of the car behind the head lite. its not fun. Good luck
Posted on Dec 18, 2008
That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.
Posted on May 07, 2009
the leak detection pump pressurizes the evaporative system to check for leaks. the computer has detected there is a fault somewhere in the cicuit (wiring) that operates the pump.
Posted on Jun 26, 2009
Code 1495 = Leak Detection Pump Solenoid Circuit
Remove the connector from the solenoid (should be on the back wall, just to the drivers side of the air-hat). You will have the solenoid to check and the harness. What you want to measure is the voltage coming from the harness and the resistance of the solenoid.
Turn the key to the "ON" position but do not start the motor; the voltage at the connector should be at least 10V or more,.now, check the resistance of the solenoid (should be around 35 ohms).
Posted on Jun 03, 2010
Tips for a great answer:
Aug 10, 2015 | Dodge Caravan Cars & Trucks
Sep 30, 2013 | 2004 Jeep Grand Cherokee
Oct 05, 2012 | Cars & Trucks
May 31, 2012 | Chrysler Cars & Trucks
Apr 16, 2012 | Cars & Trucks
Apr 17, 2011 | Chrysler 300M Cars & Trucks
ECM fault-No CCD message from TCM
- Failed ECM
EVAP leak detection pump solenoid circuit condition
- ECM detected the pump solenoid did not change status when activated
Feb 08, 2011 | 1997 Dodge Caravan
Feb 06, 2011 | Dodge Grand Caravan Cars & Trucks
Oct 26, 2009 | 1996 Dodge Caravan
194 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: