I have a 2005 S-type R with the nav system. I cannot sync my cell to the bluetooth system. I get "phone not fitted" message when I push the phone button on the inst. panel. Isn't bluetooth standard on nav equipped S-types?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This may be a problem with the ribbon contact under the steering wheel know as the "clockspring drum" It can also be the switch. Before doing any work make darn sure you disarm the Airbag system, it can go off and badly injure you.
Can you confirm which radio you have and also type of phone, Iphone, android or windows -etc.
Do you want to play music through the radio or is it just the phone connection?
Sounds like you may need to look at the bluetooth frequency's used ie 4.02 and 4.04 - if you can go into sub-menus on bluetooth settings there is an option usually to 'use another voice connection' or something similar - it sounds like one or the other unit is using 4.04 and the other 4.02 - so they connect but the audio element isnt syncing together - Check 'about' bluetooth on your phone - it may tell you if it uses 4.02 band or 4.04 - I would suggest if you knock all settings to the older 4.02 , then things should sync up fully - its the older technology standard, - hope this helps.
I purchased a 2005 S-Type Jaguar recently and it is Bluetooth capable. I have synced my cell phone to it and it has accepted it. I can call out and it rings and I can hear the person on the other line. The problem is that they cannot hear me. When I start the car, I get a messages that says "Mute and replace handset to continue hands free call or replace handset to end call." What does that mean??? Please help.
Go into the information /Nav Screen and you will find an icon for phone, then settings. Click on the icon and it it will give you a connect new phone option, click on that icon and it will release a 4 digit entry code and be findable by your phone. Next go to your phones tools or connections settings and look for Bluetooth, enbale Bluetooth, Search Bluetooth Devices/handsfree Your phone will search out the car, once found it will request the 4 digit pin code to be input and ask you to confirm "handfsree" Once confirmed the car will read out connecting...then bluetooth connection successful and the dial pad will appear on the NAV screen If you have more than one phone connected to the car the driver will need to select the connect phone button in order to chose the phone he wishes to enable
Turn on your NAV screen and go into the info main menu in the Nav system. If no NAV refer to the drivers handbook, since you will sinc by using the voice command buttons on the steering wheel and the car will offer you prompts. Click on telephone, settings, Bluetooth, ADD PHONE. Then go into the menu for the Curve, tools , add devices,enable handsfree, search new device are the icons you need. You will need to authorize the Curve to accept a new device by entering a 4 digit pin code, which will show on the car`s screen. Once completed, the car will acknowledge the Curve in it`s screen