What is the torque needed for a 10 lug 16 inch wheel ford motorhome

https://techtips.alleuro.com/wp-content/uploads/2020/10/SKF-Front-Rear-Axle-Nut-Hub-Mount-Lug-Nut-Torque-Spec.pdf

and

https://www.google.com/search?q=2015+%22hyundai+accent%22+rear+wheel+hub+torque+spec

..

they don't really need to be torqued, they aren't going anywhere, they just need to be 'tight'.

Caliper 25 ft lbs

https://www.fixya.com/cars/t26956352-torque_specs_02_lincoln_ls_replacing

Lug Nuts 100 ft lbs

https://www.sparkyexpress.ca/blogs/auto-blog/lincoln-wheel-lug-nut-torque-chart

The Lincoln Wheel Lug Nut Torque Chart we have compiled can be used as a quick reference ... LS, 16-INCH / V6/V8, 2000 - 2006, 100 ft-lbs.

all torque information

https://www.google.com/search?q=2000+Lincoln+LS+V8+torque+settings&safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk03jkr1Q8A7C80HwN9gFihttPeX94w%3A1616538088955&ei=6GlaYJnbOeOz5NoP-K-YwAg&oq=2000+Lincoln+LS+V8+torque+settings

..

Measure the bolt pattern for the wheel. For example, for a 5 lug wheel, measure the distance from one lug to the second lug over, center of lug to center of lug. Next, what diameter are you needing, 13, 14, 15 inch wheels? Next, order the proper tire for the wheel.

1993 Chevrolet Cheyenne K1500 4x4 truck Ralph, wheel nut size for your truck
Hex Size (mm): 22mm

• Thread Size: M14-1.50

• Hex Size (In): 13/16 Inch
• Thread Size: M14-1.50

• Hex Size (In): 7/8 Inch
• Thread Size: M14-1.50

List Wheel Lug Nut 1993 Chevrolet K1500 Pickup 4WD Reilly Auto Parts

No torque specs needed. Just tighten with a 4 way lug wrench till it makes a loud squeak.

Make sure you change out the speedometer gear for the proper ratio when you do that. If you go to a larger rim and use standard tires it will effect the accuracy of the speedometer. You will have to check with the Ford dealer or specialty tire shop about that effect though. I do not recommend low profile tires on that particular vehicle. You can get 4 lug Rims for your vehicle in the sizes you are looking for but you also need to be careful that the selection you make doesn't require body modification otherwise you will have to do that first or face possible control and safety problems from the tires rubbing the body structure.

Hello there
FORD TRUCK
Wheel Nut Torque Specifications
Make/Model Description Years Torque Make/Model Description Years Torque
FORD (continued)
FORD TRUCK
E250 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
E350 Van 8 Lug, 9/16" 2008-88 140 -160 ft lbs
Escape - 2003-01 98
Excursion - 2003-01 160
Excursion - 2000 148
Expedition - 2003-01 150
Expedition 19mm Hex 2000 100
Expedition 21mm Hex 2000 150
Expedition - 1999-97 100
F Super Duty Pickup 10 Lug, 9/16" 2003-99 165
F Super Duty Pickup 10 Lug, 9/16" 1998-96 140
F150 Pickup - 2003-01 150
F150 Pickup 19mm Hex 2000 100
F150 Pickup 21mm Hex 2000 150
F150 Pickup - 1999-88 100
F250, F350 Pickup 8 Lug, 9/16" 2003-01 160
F250, F350 Pickup 8 Lug, 9/16" 2000-99 148
F250, F350 Pickup 8 Lug, 9/16" 1998-88 140
Ranger, Windstar - 2003-87 100

U need to work on your question a little I think are you asking if 16 inch wheels and tires will fit your Nissan or are you asking if 16 inch tires will hold air on a rim with a 1/2 inch gap between the two? I f you are putting 16 inch wheelson are they uni lug?What were thewheels made for?
do they have the same back spacing do u have the right lug nutts for the wheels and car? Are your lug studs long enough.
There is alott of things that could be different when you change a wheel. Other than height clearance.

100 foot pounds

pick up new wheel studs. using a punch hammer out the old broken off studs. push in the new studs from the back side grease the threads put your lug nut on backwards and tighten up this will pull the stud into place. as long as your wheel isnt damaged or new wheel . use a torque wrench and torque the lug nuts drive a mile or so and torque again and then after 50 miles.