Question about 2002 Cadillac Escalade

1 Answer

How do you install fuel pressure regulator 2000 escalade?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Cadillac Master
  • 442 Answers

how do you install fuel pressure regulator 2000 es - 95057b02-cb39-4c39-aee2-0136fd8120da.jpg
2000 model remove upper intake , you will then see tehe regulator.
part #14

Posted on May 20, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel pressure regulator


It is normally in the fuel manifold rail ( at the ends or the middle) . It will have a hose from it back to the tank. IT is normally a tin made item and is sometimes adjustable but most are pre-set. It may even have a wire or two coming out of it for the pressure sensor.

Feb 01, 2014 | 2005 Cadillac Escalade

1 Answer

2000 Ford excursion V10 , I need removal procedures for fuel pressure regulator


I donnot recommend doing this by your self
it involves so much tech prosesure but to hav an idia here you go .
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly flammable mixtures are always present and can be ignited resulting in possible personal injury.
syo%7eus%7een%7efile=ani_caut.gif%7egen%7eref.gif WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running.
syo%7eus%7een%7efile=ani_caut.gif%7egen%7eref.gif WARNING: Before working on or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved.

Removal procedures for fuel pressure regulator

  1. Relieve the fuelsystem pressure. additional spiciel tools needed.
  1. Disconnect the battery ground cable. For additional information.
  1. Remove the engine air cleaner, the air cleaner outlet tube and the accelerator splash shield.
  1. Remove the throttle body spacer.
  1. Disconnect the EGR vacuum regulator (EVR).
    • Disconnect the electrical connector.
    • Disconnect the vacuum line.
  1. Remove the bolts and the bracket assembly.
  1. Remove the pressure regulator.
    1. Disconnect the vacuum hose.
    1. Remove the snap ring.
    1. Remove the pressure regulator.
    Installation
  2. syo%7eus%7een%7efile=ani_caut.gif%7egen%7eref.gif CAUTION: Check for fuel leakage after installation is complete.
    NOTE: Lubricate the new O-ring seals with engine oil.
    To install, reverse the removal procedure.

Oct 07, 2011 | 2000 Ford Excursion

1 Answer

How to take off a fuel pressure regulator on a 2000 ford excursion


bleed off pressure by disconnecting wiring from inertia switch or pull fuse for the pump, start engine till it stalls. pressure will be zero.
pressure regulator is on fuel rail. They seldom go. If you are losing pressure overnight or low pressure ( below 40 psi), it is likely the check valve in the fuel pump in the tank.

Pressure Regulator -Fuel 4.6L 4V Removal
syj~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in personal injury.
syj~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before working on or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved. Failure to follow these instructions may result in personal injury.
  1. Relieve the fuel pressure. For additional information, refer to Section 310-00 .
  1. Remove the upper intake manifold. (BIG JOB). For additional information, refer to Section 303-01B .
  1. Remove the fuel pressure regulator (9C968).
    1. Disconnect the fuel pressure regulator vacuum hose.
    1. Remove the snap ring.
    1. Remove the fuel pressure regulator.
  1. Remove and discard the fuel pressure regulator O-ring seals.
Installation
  1. syj~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use O-ring seals that are made of special fuel resistant material. Use of ordinary O-ring seals can cause the fuel system to leak. Do not reuse O-ring seals.
    NOTE: Lubricate the new O-ring seals with clean Super Premium SAE 5W-30 Motor Oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G, to aid installation.
    To install, reverse the removal procedure.
---------------------------------------------------------------------------------------
Pressure Regulator -Fuel 4.6L 2V, 4.6L 2 Valve Removal
syj~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in personal injury.
syj~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before working on or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved. Failure to follow these instructions may result in personal injury.
  1. Relieve the fuel pressure. For additional information, refer to Section 310-00 .
  1. Remove the fuel pressure regulator.
    1. Disconnect the vacuum hose.
    1. Remove the snap ring.
    1. Remove the fuel pressure regulator.
  1. Remove and discard the fuel pressure regulator O-ring seals.
Installation
  1. syj~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use O-ring seals that are made of special fuel resistant material. Use of ordinary O-ring seals can cause the fuel system to leak. Do not reuse the O-ring seals.
    NOTE: Lubricate the new O-ring seals with clean Super Premium SAE 5W-30 Motor Oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G, to aid installation.
    To install, reverse the removal procedure.

Jun 10, 2011 | 2000 Ford Excursion

1 Answer

My escalades Fuel pump is not making hissing noise when cranked.


Go to pressure regulator, access test valve. Press it in and turn on key. Crank for one second. Gas should come out.

May 25, 2011 | 2000 Cadillac Escalade

1 Answer

How to replace fuel pressure regulator 2000 Olds. Alero V-6


relieve fuel system pressure. on the v6, detach the fuel return line from the fuel pressure regulator. remove the mounting fasteners, and detach fuel regulator from rail. on the v6 install the fuel return line before tightening the regulator mounting screws. otherwise a leak could develop. be sure to replace all O-ring seals, and coat them with a lite coat of oil. have a good one !!

Dec 22, 2010 | 2000 Oldsmobile Alero

1 Answer

I need to replace de fuel presurre sensor in a pontiac montana ,do i have to just replace the sensor ,o the sensor came with the fuel pump?thank you


Replacing the fuel pressure regulator, involves just replacing the regulator at the end of the fuel rail in the engine compartment, but fuel pressure sensor - does this mini-van have a fuel pressure sensor?
replacing the fuel pressure regulator: (1) locate it at the end of the fuel rail in the engine compartment,
(2) relieve fuel system pressure (3) disconnect fuel pressure regulator vacuum line. (4) remove fuel pressure regulator retaining screw (retain for re-use (5) using a shop towel to catch spilled fuel, lift & twist Fuel pressure regulator to remove it from the fuel rail. (6) remove/discard retainer and spacer bracket from the fuel rail. (7) remove fuel pressure regulator from the engine fuel return pipe. (8) remove/discard Fuel Pressure Regulator inlet O-ring (9) Check Fuel Pressure Regulator filter screen for contamination - if contaminated, replace Fuel Pressure Regulator. (10) Lubricate new Fuel Pressure Regulator inlet O-ring with clean engine oil & install onto the Fuel Pressure Regulator inlet. (11) Install the fuel return pipe onto the Fuel Pressure regulator (12) Install new retainer & spacer bracket into the slot on the fuel rail.
(13) Install Fuel Pressure Regulator onto Fuel Rail & tighten Engine Fuel Return Pipe nut to 13 ft-lbs (17 Nm). (14) connect Fuel Pressure Regulator vacuum line, (15) Install Fuel Pressure Regulator attachng screw & tighten to 76 in-lbs (8.5 Nm). (16) Inspect & verify that retainer & spacer bracket is engaged in the slots on the fuel rail. Grasp & pull on the Fuel Pressure Regulator.
to ensure that the Fuel Pressure Regulator is properly seated. (17) inspect for fuel leaks with this
procedure: On 2sec,(holy rollers), off 10sec will be left on, inspect for leaks while running.

Dec 11, 2010 | 2000 Pontiac Montana

2 Answers

Where is fuel filter in 2000 Jeep Grand Cherokee and how to get to it


For 2000 Jeep Grand Cherokee the Fuel Filter is located under vehicle, driver side, below bed area, front of fuel tank, mounted on chassis in fuel line.

cc3326a.jpg

Fig. Fuel filter/pressure regulator location-1999-01 models




d1426b6.gif


Fig. Fuel filter/pressure regulator-Grand Cherokee
  1. Before servicing the vehicle, please familiarize yourself with safety procedures.
  2. Relieve the fuel system pressure.
  3. Remove or disconnect the following:
    Negative battery cable Fuel supply, return and pressure lines Mounting bolts Fuel filter/pressure regulator
To install:
  1. Install or connect the following:
    Fuel filter/pressure regulator to the body. Torque the bolts to 30 inch lbs. (3 Nm). Fuel pressure, return and supply lines Negative battery cable
  2. Start the vehicle, check for leaks and repair if necessary.


Gooe luck (remember rated this post).

Jun 01, 2010 | 2000 Jeep Grand Cherokee

1 Answer

What is the fuel pressure for a 1996 mercury sable?


c8f0146.jpg

Fig. 1: Fuel pressure regulator exploded view

CAUTION Observe all applicable safety precautions when working around fuel. Whenever servicing the fuel system, always work in a well ventilated area. Do not allow fuel spray or vapors to come in contact with a spark or open flame. Keep a dry chemical fire extinguisher near the work area. Always keep fuel in a container specifically designed for fuel storage; also, always properly seal fuel containers to avoid the possibility of fire or explosion.
  1. Disconnect the negative battery cable.
  2. Properly relieve the fuel system pressure.
  3. Remove the air cleaner outlet tube(s).
  4. Remove any necessary components to access the pressure regulator.
  5. Disconnect the vacuum hose from the pressure regulator.
5cbce7e.jpg
  1. Remove the pressure regulator attaching screws.
548c606.jpg
  1. Remove the pressure regulator from the fuel rail.
c8de9d3.jpg

To install:
  1. Discard the O-rings on the pressure regulator and replace them with new ones.
0f4e232.jpg
  1. Lubricate the O-rings with clean engine oil.
0719c6e.jpg
  1. Install the regulator into the fuel rail and tighten the retaining screws.
  2. Connect the vacuum hose to the regulator.
  3. Install any components removed to access the regulator.
  4. Install the air cleaner outlet tube(s).
  5. Connect the negative battery cable.

Hope help with this (remember rated this).

May 28, 2010 | 2000 Mercury Sable

1 Answer

Where is fuel pressure regulatore located


For 2000 Chevrolet Truck Blazer 4WD 4.3L SFI 6cyl
If your engine is a 4.3L V-6 with CPI (central point injection) it is inside the upper intake manifold. The upper intake manifold is bolted on top of the normal intake manifold.

The throttle body is mounted on it and your fuel lines terminate into the center of this.


Removal & Installation
  1. Relieve the fuel system pressure.
  2. Remove the air cleaner outlet resonator.
  3. Disconnect the engine wiring harness from the retaining clips at the front of the engine.
  4. Disconnect the fuel pressure regulator vacuum line.
  5. Clean any dirt from the fuel pressure regulator and the surrounding area.
  6. Disconnect the fuel return pipe.
  7. Remove the fuel return pipe retainer.
  8. Remove the fuel pressure regulator retainer.
  9. Remove the fuel pressure regulator.
  10. Inspect the regulator filter screen for contamination. If contaminated, replace the fuel pressure regulator.
To install:


aaf5240.jpg
Fig. Fuel pressure regulator-4.2L engine
  1. Install the regulator filter.
  2. Install the new O-ring on the fuel pressure regulator.
  3. Lubricate the fuel pressure regulator O-ring with clean engine oil.
  4. Push the fuel pressure regulator into the regulator housing on the fuel rail.
  5. Install the fuel pressure regulator retainer. Tighten the regulator retainer screw to 71 inch lbs. (8 Nm).
  6. Install the fuel return pipe retainer. Tighten the return pipe retainer screw to 71 inch lbs. (8 Nm).
  7. Connect the fuel return pipe.
  8. Connect the fuel pressure regulator vacuum line.
  9. Connect the negative battery cable.
  10. Inspect for leaks:
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
  11. Install the engine wiring harness into the retaining clips at the front of the engine.
  12. Install the air intake resonator.
Hope help with this (remember rated this post).

Feb 26, 2010 | 2000 Chevrolet Blazer

1 Answer

Fuel pressure regulator location on 5.7 v8


The fuel regulator is located on the top of the gas tank it is a pain in the neck to get to

Feb 06, 2009 | 2000 Cadillac Escalade

Not finding what you are looking for?
2002 Cadillac Escalade Logo

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...