Question about 1997 Chrysler Sebring

Open Question

I have a 1997 chrysler sebring - the door locks go on and off randomly -- and there is a chiming sound at times - also dashboard display flashes open door - what causes this?

Chiming sound and door locks go on and off while driving -- how do I fix this - thank you

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Mr Repair
  • 10 Answers

SOURCE: Remote car door opener got wet and won't work

Well first open it up completly. Remove the battery. Get a hair dryer and dry it out completly. Then let it stand for several hours to cool down. Make sure that the contacts where the battery fits are clean of any rust, or corrosion. Now install a new battery. It should work.

Posted on Jul 09, 2008

  • 1 Answer

SOURCE: milage odometer on 1997 Chrysler Sebring doesn't work

i got a better way you to fix it http://members.cox.net/dpeters30/97_sebring_dash.htm it free if you know how to solder. It works I did it this june and it still works

Posted on Sep 03, 2008

ga_drifter
  • 36 Answers

SOURCE: 2004 chrysler sebring.The driver side rear door electric window

you have a bad window regulator assembly

Posted on Jan 30, 2009

  • 1 Answer

SOURCE: How Do i Remove Dash Board Speakers From A 1997 Chrysler Sebring

all u do is pop them out, they pull upu may need 2 use a screwdriver or something to get them started, then u follow the wire down and theres a lil connecter u can pull

Posted on Apr 10, 2009

  • 1 Answer

SOURCE: I HAVE A 2005 CHRYSLER SEBRING AND DOME LIGHT,RADIO ALL POWER LOCKS HAVE QUIT WORKING

me too! - looking at fuse #5 red 10 Amp one but has black thing on it.

Can't get if off..

Have read the manual is wrong and to use panel on side of fuse box for fuse locations...

Posted on Jun 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The speedometers flutter up and down when car is on chrysler sebring 1997


there are two sets of fuses in the sebring.check both the under-hood fuses and also make sure to check the fuse located on the left side of the dashboard.

Apr 05, 2014 | 1997 Chrysler Sebring

1 Answer

2000 chrysler cirrus doors


I doubt the door will open when the car is moving. But the door lock issue is probably the sensor in the door latch.

Aug 11, 2013 | 2000 Chrysler Cirrus

1 Answer

My 1996 chrysler sebring jxi convertible is shut down by the anti-theft system and won't start


tfit8 was correct...I have a 1996 Sebring JXi convertible, I had the exact same problem, I googled it, and that's exactly what worked...resetting the alarm system by locking and unlocking everything, including the truck, with my key

Aug 11, 2012 | Chrysler Sebring Cars & Trucks

1 Answer

My passenger door wont open on my 2010 chrysler sebring


when you pull on the handle inside does it feel like the linkage is still attached or does it feel losose. sounds like the like the lock actuator. . I had a few cars in my garage where the door was slammed and it knock off the linkage to lock actuator.this is my link to my garage I am on facebook. https://www.facebook.com/TedsRepairs

Jul 20, 2012 | 2010 Chrysler Sebring

1 Answer

Drivers door wont open


Chrysler2008 sebring drivers door wont open all other doors and central locking working including drivers door but will not open any suggestions..

Jun 01, 2012 | 2007 Chrysler Sebring Sedan

1 Answer

Diagnostic Troubleshooting Codes for 1996 Chrysler Sebring Cvtble


FIRST YOU TURN IGNITION SWITCH ON WITH ENGINE OFF.LOOK AT MIL LIGHT IT SHOULD COME ON 3 SECONDS THEN GO OFF IT NOT THEN YOU GOT BURN OUT BULB OR A CIRCUIT PROBLEM.IF ALL IS WELL. ATTEMPT TO START ENGINE.TURN OFF IGNITION. WITH OUT STARTING ENGINE.TURN IGNITION ON OFF ON OFF AND WITHIN 5 SECONDS RECORD 2 DIGIT DIAGNOSTIC TROUBLE CODES.DISPLAYED BY FLASHING MIL LIGHT.YOUR MIL FLASHES WILL BE YOUR CODE LIKE THE MIL LIGHT FLASHES 5 TIMES THEN PAUSE FLASHES 3 TIMES THAT CODE 53 THAT YOUR CODE.IT LIKE MORSE CODE.WHEN DONE TURN OFF IGNITION SWITCH.GO TO AUTO ZONE OR ADVANCE AUTO GET HAYNES COMPUTER CODE BOOK. TO GET CODE MEANING OR WHAT SENSOR GONE BAD.HOPE THIS CAN BE SOME HELP.

Jul 27, 2009 | 1996 Chrysler Sebring

1 Answer

Blower motor Fuse for Chysler


open the drivers door, open the end cover on the dashboard

Nov 22, 2008 | 1997 Chrysler Sebring

1 Answer

1997 venture keyless remote programming


SYSTEM OPERATION

System warning lamp located on top of the instrument panel
Press UNLOCK button once , turns on interior lamps and deactivates alarm (if fitted)
Press UNLOCK button twice w/in 5 seconds unlocks all doors, turns on interior lamp and deactivates alarm (if fitted)
To activate alarm system (if fitted):
Switch ignition OFF
Open driver's door
Press Lock button on remote
Close Driver door
warning lamp will flash when system is activated
Press remote power sliding door button will open sliding door (if fitted) only if unlocked first
Pressing remote panic button:
*Sounds horn intermittently
*Flashes exterior lamps
*Turns on interior lamps
**Pressing panic for the second time OR switching ignition ON deactivates alarm.


PROGRAMMING
Remobe key from ignition switch
Remove the "BCM PRGRM" fuse, from the fuse box
Close all doors
Turn ignition switch to the ACC position
With in 1 SECOND , turn the ignition switch to OFF then back to 'ACC'
(really, with in one second)
Open and close the driver's door. A chime will sound, indicating programming mode activated
Press and HOLD LOCK and UNLOCK SIMULTANEOUSLY untill a chime sounds 2 times ( about 15 seconds)
Repeat this exact procedure for all remotes to be programmed
Remove key from ignition
Refit 'BCM PRGRM' fuse.

4 REMOTES MAXIMUM CAN BE PROGRAMMED

Aug 24, 2008 | 2000 Chevrolet Venture

Not finding what you are looking for?
1997 Chrysler Sebring Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...