Question about Chevrolet Cavalier
Sometimes my engine still runs after turning the ignition off. What could be the cause of that?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: car running problem
Ok Slow deceleration rev responce was part of the ECU software to keep the emissions down ,however if this has only just started you can try to reset the IAC valve ,the procedure is as follows.
Turn ignition key on ,unplug the IAC valve ,turn the key off ,replug the IAC valve. do this 3-4 times .Then start the engine while holding the gas pedal to 2000 rpm ,then slowley let the go of the gas pedal till the engine idles .
The IAC valve is located on the throtle body and has 4 wires to it.
Sometimes the throtle body needs to be cleaned and then reset.
Posted on Jan 20, 2009
after i replaced the battery in my 2003 350z, it would stall immediatly after i cranked it on unless i gave it a little gas. I fixed this by cleaning the MAF and throtle body valve. Total supply costs were $15 and took about 20 minutes. My Z is not only fixed but runs smoother and cleaner.
Posted on Feb 27, 2011
If you have not done so pull the engine codes or have someone do it.
The codes will give you a good idea where to start otherwise the first place I would check is replacing the Crankshaft Position sensor. This is not only very common for them to fail but I have 1994 Laredo and 1996 Laredo and both had the same trouble at exactly the same time. In addition I replaced the Intake Air Temp sensor, coolant temp sensor and idle air control valve on the 1994. The clicking is probably relays and is more than likely normal.
Posted on Dec 15, 2011
Are you sure that you do not have a delay timer on these lights? This is a feature that keeps the lights on for a set amount of time for you to see your way to the door or whatever. My light timer is on a 30 second hold before turning off.
Posted on Oct 05, 2012
Tips for a great answer:
Mar 28, 2016 | Cars & Trucks
Dec 01, 2015 | Cars & Trucks
Jan 16, 2014 | 2007 Toyota Corolla
Oct 05, 2012 | 2002 Saturn L-Series
Aug 21, 2012 | 2004 Cadillac DeVille DTS
Jul 17, 2011 | 1995 Oldsmobile Cutlass Ciera
Jun 06, 2011 | 2000 Ford Explorer
Jun 17, 2009 | 2005 Mazda 3
Mar 25, 2009 | 2007 Toyota Corolla
14 people viewed this question
Usually answered in minutes!