Question about 2000 Toyota Avalon

1 Answer

How do you replace a oil pump on a 2000 avalon

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,384 Answers

It's my understanding that the Avalon and Camry for said year are the same in respect to
the oil pump.I was able to come up with a video to show you how all the stuff has to be removed
from the front of the engine in order to get to the oil pump for replacement.This took some time
to find,but I do not mind.My friend,you've a lot of work ahead of you.I've been thru it before,and
won't do it again.Best of luck to you in your endeaver.
URL/YouTube:http://www.youtube.com/watch?v=9NvTu1zr-P4
Now the oil pump proceedure in print:
Instructions
Remove Oil Pump
1
Drive your Toyota Camry up onto ramps or lifts so you have room to work as you pull out the oil pump.
You could also use a jack, but make sure you brace the front wheels so they don't roll. In addition,
set the emergency break firmly into position so the car doesn't roll.
2
Drain the oil out of your engine and disconnect the negative battery cable. Remove the fender apron
seal and the undercover, the front exhaust pipe, and the front exhaust pipe bracket from the No. 1
oil pan.
3
Remove the following components in order: the alternator drive belt, the air conditioner compressor,
the power steering pump drive belt and the adjusting strut, the timing belt along with the belt
pulleys, the rear timing belt cover, the air conditioning compressor housing bracket, the No. 2 oil
pan and oil strainer, as well as the No. 1 oil pan and baffle plate.
4
Disconnect the crankshaft position sensor and remove all nine of the oil pump bolts. Remember where
each bolt was located.
5
Take out the oil pump body by reaching in and grasping between the oil pump and main bearing cap.
Remove the O-ring from the cylinder block then remove the plug, gasket, spring and relief valve
from the oil pump body.
6
Finish by taking out all nine screws, the pump body cover and the driven rotors. Clean all
components to remove contaminants.
Install the Oil Pump
7
Install the new oil pump by slipping it into the same spot where the old one was. Reconnect
the following: the driven rotors, the drive pump body cover, all nine screws, the oil pump
relief valve, the spring, the gasket and the plug to the oil pump body.
8
Insert a new O-ring onto the cylinder block and add liquid sealant to the oil pump and the
engine block. Put the oil pump back on the engine block.
9
Add and tighten the bolts over several passes, keeping the torque even. The 10 mm head should
be 69 in-lb. and the 12 mm head should be 14 ft-lb.
10
Reconnect the crankshaft position sensor, torquing the bolt to 69 in-lb. Insert the No. 1 oil
pan and oil strainer and the No. 2 oil pan.
11
Reinstall the air conditioner compressor housing bracket, tightening the bolts to 18 ft-lb.
Add the rear timing belt cover, tightening those bolts to 74 in-lb. Insert the timing belt
pulleys, the timing belt and the adjusting strut and power steering drive belt, tightening those
bolts and the nut to 32 ft-lb.
12
Install the air conditioning compressor, the alternator drive belt and the front exhaust pipe
bracket to the No. 1 oil pan, torquing the bolts to 15 ft-lb. Add the front exhaust pipe, the
undercover, and the right fender apron seal.
13
Connect the negative battery cable and fill the engine with fresh oil. Start your Toyota Camry
and look for leaks in your working area.

Posted on May 16, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 76 Answers

SOURCE: Replacing 2000 toyota avalon fog light bulb

o easy enough just jack frontcar up use jackstand for safety now loo up under the bumper where fog lights sit depending on style fog light u might need to pull the whole assembly out or just twist the bulb not a hard task once u see it from underneath it is pretty easy

Posted on Dec 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When replacing timing belt in 2000 toyota avalon should water pumped be replaced also..? no issues on that front yet...


It is a precautionary act, water pump and tensioner should be replaced for peace of mind. The xost of replacing a water pump will be higher if it has to be changed at another time, a new belt
might have to be fitted too. Best to get it all done in one go is the current wisdom

Jun 08, 2015 | 2000 Toyota Avalon

1 Answer

Change oil pump on 2000 toyota avalon


How do you change a oil pump on a 2000 Avalon and is it hard to do. I'm a starter , brake , and external water pump guy , I have the tools

Jun 20, 2013 | Toyota Avalon Cars & Trucks

1 Answer

2000 toyota avalon noise vvt actuator


make sure if noise come from vvt actuator, check the oil quality

Jun 28, 2017 | 2000 Toyota Avalon

2 Answers

Just want to know if I have to change the timing belt on my 1997 Avalon XLS with 63,350 original miles (always used Premium gasoline and Mobil 1 oil) and if the belts is changed, does the water pump need...


DUE TO THE AGE OF CAR, TIMING BELT WOULD BE A GOOD IDEA, YOU DO NOT HAVE TO REPLACE WATER PUMP, BUT IT WOULD BE A GOOD IDEA..GAS AND OIL HAVE NO EFFECT ON TIMING BELT OR WATER PUMP.....

Jan 10, 2011 | 1997 Toyota Avalon

1 Answer

I have a 2000 Toyota Avalon with 84000 miles. It


good idea, it may not give you a problem but it is time according to mileage, and good insurance for your trip

May 26, 2010 | 2000 Toyota Avalon

1 Answer

Engine oil pressure problem


I would start with dropping the oil pan to check pick-up tube to oil pump could be cloge.Good luck.

Nov 30, 2009 | 2003 Toyota Avalon

1 Answer

Cant find fuel pump relay on 2000 avalon


b/c u don 't have one u have c/opn relay ( circuit open relay ) that controls the fuel pump. which is located under hood fuse box a long the driver fender. good luck

Aug 19, 2009 | 2000 Toyota Avalon

Not finding what you are looking for?
2000 Toyota Avalon Logo

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...