Question about 2004 Ford Taurus

1 Answer

Pcv location ford escape 2010 2.5 gas engine - 2004 Ford Taurus

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 39 Answers

The PCV valve is located under the intake manifold on the non-hybrid 2.5L engine. The intake manifold MUST be removed in order to service the PCV valve.
The PCV valve sits in the crankcase vent oil separator.

Posted on May 16, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jcpark50
  • 52 Answers

SOURCE: where is the pcv valve located on a 2000 zetec engine?

try Google.com [2000 focus pcv valve] somebody should show you where it is.good luck, John

Posted on Nov 07, 2008

  • 3 Answers

SOURCE: PCV valve location

if i know what you are asking, look at where you put your oil in. on the valve cover to the top right should be a plug with a tubeing runs to your air clear tube where the air mass sensor and carb is located. i think that is what you are looking for.

Posted on Nov 07, 2008

  • 45 Answers

SOURCE: Need location diagram of PCV valve location

believe it is located on passenger side valve cover half way back. if i'm mistaken you could go to autoparts store and check a haynes manual

Posted on Dec 27, 2008

  • 10 Answers

SOURCE: Where is the PCV Valve Located ???

okay i'm not 100% sure but it should be on top of the vavle cover or near the intake

Posted on Jan 19, 2009

01fordeb
  • 1033 Answers

SOURCE: PCV valve failed visual inspection during smog

remove the hose to the PCV and It simply pulls out and a new one is pushed in and hose is inserted back on. It's kind of like a cork. I can not believe they check for visual inspection. Here in SC, we don't have inspections. But anyways, GOOD LUCK

Posted on Oct 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I am having difficulty locating it. I need to know how to locate and replace a thermostat on a 2002 ford escape


Follow the top radiator hose down to where it connects to the engine. You should find a dome shape item or a couple of smaller bolts that attach to the engine to the side of the radiator hose and the thermostat will be inside the housing. You will need to drain the radiator, remove the bolts holding the thermostat housing to the engine and remove the old stat and put in a new one be sure to make note of how the stat is facing when you remove it and put the new one in the same way. then reconnect the thermostat housing making sure the gasket is in place so it won't leak, then refill the radiator slowly so you don't cause an air lock in the radiator, with cap still off start the engine and allow it to warm up until the stat opens and then you will need to add more antifreeze to the system. Double check for any leaks. Turn on the heater and make sure you have good heat and you should be good

Jan 11, 2016 | Ford Cars & Trucks

1 Answer

2009 ford escape pcv valve location


On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple. That hose makes a 90 degree bend and goes around to the rear of the motor. Where that hose meets the Y-connector from the other side of the intake you'll find the PCV valve. It's almost impossible to see it with the hood installed, and even tougher to reach it.

Dec 14, 2015 | 2009 Ford Escape

2 Answers

Where is the main power fuse at for a 2010 ford escape located?


http://www.paulstravelpictures.com/Ford-Escape-Electrical-Fuse-Replacement-Guide/

Apr 02, 2015 | 2010 Ford Escape

1 Answer

2010 ford escape limited edtion should it have a gas capp


Every car needs a gas cap or the service engine lite will come on and generate a code telling you there is a fuel tank problem

Jan 10, 2014 | 2005 Ford Escape

1 Answer

2010 Ford Escape with no message center... where / how to rest after oil change... and no it is NOT in the owners manual


Try this, turn your ignition to on position but do not start and push gas pedal to the floor 3 times and turn switch off then start engine an see it works.

Jun 06, 2012 | 2010 Ford Escape

1 Answer

Location of pcv on v6?


All PCV Valves are on the valve cover

They NEVER need replacing

Look at one,why would you change it?

They have no effect on anything,engine
performance etc

They only regulate crankcase evacuation

Jul 27, 2011 | 2002 Ford Escape

1 Answer

Were is locate the pvc valve in my 2003 ford escape 3.0l xlt, the engine light is on. Tanks


Valve Cover

PCV won't set a check light,unless you have
a vacuum leak near it & it won't be the PCV

Apr 05, 2011 | 2005 Ford Escape

1 Answer

Where can i find pcv valve of 2.5 engine mazda mpv,where is it mounted in the engine


PCV Valves are located on top of the valve cover and allow gas to escape from the blow by of piston gases.
Look for a black plasltic piece that is inserted into the top of the valve cover near the front of the engine with a rubber hose connected to it.

Jul 09, 2010 | 2000 Mazda MPV

3 Answers

Where can I find the pcv valve location


please rate as fixed if this helps.

4 cylinder

SECTION 303-08: Engine Emission Control 2003 Escape Workshop Manual
REMOVAL AND INSTALLATION Positive Crankcase Ventilation (PCV) Valve —2.0L Zetec Removal and Installation
  1. Remove the PCV valve.
    • Remove the crankcase ventilation hose from the PCV valve.
    • Remove the PCV valve from the grommet by turning the valve counter-clockwise
f21fec7.gif
------------------------------

Apr 12, 2009 | 2005 Ford Escape

Not finding what you are looking for?
2004 Ford Taurus Logo

969 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...