Question about Cars & Trucks
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
go to the link below and choose the 1998 ford ranger as the truck, they are the same, then follow the link to ford site and download the 1998 ranger owners manual, the fuse diagrams are in there
Posted on Sep 16, 2009
Low idle problem can cause by a lot of components.
Dirty air filter
Dirty injectors + o-rings
Vacuum leak at intake manifold and vacuum hose.
Bad Idle Air Control Motor (IAC)
Low compression (170 psi + is OK)
Start cleaning and repair these trouble spots and see is there any improvement.
Please rate my answer if it's useful to you.
Posted on Dec 13, 2009
jack up car, remove the road wheels, at the rear of the caliper you will have 2 or 3 bolts holding the caliper onto the stub axle, remove the bolts and remove the caliper, remove the outer pad, leave the inner pad in place and use a "G" clamp to compress the brake piston until it has bottomed, if this is not done the new pads will not fit back over the rotor as the piston is too far out and the new pads are thicker than the old ones.
place the new pads in the caliper and fit over the rotor, replace the 2 or 3 bolts that hold the caliper in place, replace the road wheel, tighten the nuts and lower the car to the ground, pump the brake pedal to see if you have brakes, if you do have brakes take it for a test drive away from any traffic if possible
Posted on Jun 13, 2010
Tips for a great answer:
May 16, 2014 | Cars & Trucks
May 14, 2014 | 1999 Mazda B2500
Jul 01, 2011 | Mazda B-Series Truck Cars & Trucks
Feb 06, 2010 | 1999 Mazda Pickup
Jan 30, 2010 | 2000 Mazda B-Series
Jan 23, 2010 | 1999 Mazda Pickup
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: