Question about 2000 Jeep Wrangler

2 Answers

My 2000 jeep wrangler wont start it ran fine one min and the next it wouldnt even start i have try evryting i could think of i replaed the brain and other things. it gets power to the coil but not comeing out to the sparkplugs i have tested the relays fuses and i just at a stop you have any ideas is so email me at r.dameron@yahoo.com thanks

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 74 Answers

It has power to the coil but the coil don't let the power out thats the problem. So replace a new one.

Posted on Aug 05, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

There is no replacement for proper testing. Shops get paid a lot because it is time consuming and equipment is expensive. Without doing any testing, I can recommend that you get yourself a decent volt/ohmeter and a manual before you spend more money. (chilton and haynes are OK for basic tests) Most common failure is the crank sensor, but again, don't guess...test it!!!

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1978 rabbit wont start


Could be a defective battery. May have a dead cell so it charges but does not hold charge.

Jul 23, 2016 | Volkswagen Cars & Trucks

1 Answer

2000 jeep wrangler wont start


If it won't crank, check clutch safety switch and cables for the starter.
If it cranks but won't start, you'll need to find out if it is ignition or fuel to know where to look next.

Jun 26, 2012 | 1994 Jeep Wrangler

1 Answer

Jeep ran out of gas wont start now


low oil on some models will stop it from starting however I would say you have a fuel filter stoped up this happens sometimes when you run a car out of gas they pick up trash,

May 13, 2012 | 2005 Jeep Wrangler 4.0

1 Answer

My jeep wont start. The alarm went off so I


this is a warrenty issue. have the dealer look at it.

Nov 18, 2009 | 2008 Jeep Wrangler

2 Answers

1995 Jeep Wrangler 2.5 4cyl spits and sputters while driving


if you have an electric fuel pump that would explain the hum. unhook your incoming fuel line and blow the line clear, sounds like you've got some junk in your tank.it'll build up on the screen in the tank then fall off (at least partially) when your making turns or hitting bumps or holes. next time it's only got a gallon or so of fuel i'd drop the tank and check the pickup tube inside. sux but that's the only way to get to it. while you've got the tank off and out from under the jeep, might as well clean it out real good and replace anything inside (usually the screen) that doesn't look right, dirty etc. wouldn't hurt to run a bottle of fuel system cleaner in the next full tank of fuel either. preferably as soon as you put your tank back. good luck

Mar 25, 2009 | 1995 Jeep Wrangler

1 Answer

Wont start


I'm sorry, but I'm a bit confused regarding your statement where you said, "I drove it without a air filter for 4 days the put in a new one but it still wont start." Please clarify. Thank you, jetski224

Nov 17, 2008 | 1989 Jeep Wrangler

1 Answer

2000 JEEP WRANGLER


hello first thing to check is your fuses make sure there all good sounds like one blew ign,ecm,pcm, goodluck

Aug 09, 2008 | 2000 Jeep Wrangler

1 Answer

1988 Jeep Wrangler wont start. I dont have any spark? I recently replaced the gas tank and may have possibly ran the fuel pump out of gas. But I can hear the fuel pump running it just seems to be making...


Try your camshaft possition sensor. If it is the same as my problem I just had to replace that and it started right up. Oh and mine was built into the distributer assembly. Take off cap and pin it's the plastic thing at the bottom. Should just pop out and you have to go to the dealer to get the part. Hopefully this helps!

Jul 30, 2008 | 1991 Jeep Wrangler

Not finding what you are looking for?
2000 Jeep Wrangler Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...