Question about 2004 Suzuki Ignis

Open Question

2004 Suzuki ignis running on 3 cylinders sometimes

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1114 Answers

SOURCE: misfire code on #3 cyl. 2004 Suzuki Verona

I had the same problem I disconnected the battery to reset computer when I was changing my plugs & ignition wires! hope this helps

Posted on Dec 23, 2008

Ad
  • 102 Answers

SOURCE: suzuki ignis 2002 oxgen sensor functions

It gets pretty hot in there, and although hardly any manufacturers specify replacement intervals for oxygen sensors, they play a critical role in providing the ECM with acurate data for best running performance/economy. Change it, as the savings in NOT changing it will be soon eroded by increased fuel usage.

Posted on Sep 21, 2009

inspectmycar
  • 233 Answers

SOURCE: Thickness of brake disks for Suzuki Ignis Sport 109 HP, 2004

Generally you do not want to let them wear anymore than 1/16 of an inch either inner or outer pad. The inner pad will wear a little faster than the outer, but you will want to go by which ever one is thinner. As far as the parameters of new disk, they will have a minimum thickness per DOT standards. The minimum thickness is usually stamped on the disk (rotor), if it is not you can get this info from your local repair shop, or auto supply shop.

Posted on Nov 10, 2009

  • 1 Answer

SOURCE: overheating, sometimes thermostat starts work,

rear of motor and a ***** to get to

Posted on Jan 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Suzuki ignis 2002 power steering reservoir


Hello Mina Harker,

Saw your comment go in... Problem is...
"IGNIS" (I'm not getting as a USA model (little data here))...
but what I am looking at seems to be RIGHT-HAND DRIVES...

Which would EXPLAIN why I was seeing the PS tank behind the
RHD (drivers side headlight...

I responded there (Jurily Hawrylak's answer) as well... (if equipped) the power steering PUMP... should be quite obvious near the TOP of your serpentine belt (at least on the diagrams I am pulling up).

- Find the blue filler cap ... near the BRIGHT YELLOW dip stick handle...

At that same level... move your hand in a small circle... FEELING for a BLACK PLASTIC cap.... that says POWER STEERING fluid

Go to Bing homepage

But just for A thought... there is such a thing as an ELECTRIC POWER STEERING on a IGNIS: (worth saying)

SUZUKI IGNIS 1.3 EPS ELECTRIC POWER STEERING COLUMN + ECU KOYO Q1T18172M

SUZUKI IGNIS 1 3 EPS ELECTRIC POWER STEERING COLUMN ECU KOYO Q1T18172M

Jul 23, 2016 | Suzuki Cars & Trucks

1 Answer

Suzuki ignis 2002. I have a problem when the car is cool the transmission is ok, the speed past easy. when it run for a while it stay in one speed the 1 speed. Any idea what the problem is


get it serviced? yet? pops to mind first.
get it scanned yet?
your mech will drive it. and see if
1: transmission is messing up, (lots of ways there)
2: or engine power is lacking, or misfiring,
that takes hands no testing. we can do that here, nor tell you.

the top reason is, lack of service.
no car drives for ever, lacking service, zero.

Feb 21, 2016 | 2004 Suzuki Ignis

2 Answers

Hi, I have a suzuki ignis 2004. I stayed out of electricity, so my blaupunkt radio needs a code. Please anyone help me. on a radio there is little sticker on the side with the following codes serial...


CODE 1793
Code Entry as Follows:

Switch Radio On - Display Shows
" CODE "
Press and Hold "BAND"
The display will now show " 10 - - - - "
Press preset " 1 " repeatedly for 1st Digit
Press preset " 2 " repeatedly for 2nd Digit
Press preset " 3 " repeatedly for 3rd Digit
Press preset " 4 " repeatedly for 4th Digit
If the correct code number is now shown
Press and Hold "BAND" to Enter

Dec 12, 2014 | 2004 Suzuki Ignis

1 Answer

How to change a c.v. joint on a Suzuki ignis sport


you want all 50 steps?
the FSM covers this, so you dont have the book?
what country, ? we dont have one here. so, can not post this.
try youtube and pray, done once on a ignis?

Oct 15, 2014 | 2004 Suzuki Ignis

2 Answers

Where is power steering reservoir for Suzuki ignis


open glove box
take out the operators guide
turn to steering pages.
bingo.

Jul 06, 2014 | 2004 Suzuki Ignis

1 Answer

Suzuki Ignis gearbox problem, can not select first gear. Intermittent problem with first gear, sometime it clears by declutching a few times. Most of the time it is necessary to turn the ignition off to...


I have Susuki Ignis, 2004, 1.3L Engine, I have the same problem above , Automatic gear Test Give, Code P0705, which is refers to PNP sensors, Switch.. It gives all D,D2, L, P all off in test and shows the gear position on R what ever the real position of the gear lever is. gear selector PNP switch to be changed. We have no deales of susuki ignis in our country, and I need to requst this part from another Country, they Need the part No. I have send what I found on my existing selector, PBT-GF35, but , no use. If any body can help send me the Susuki Ignis STD Item No. Please

Aug 13, 2012 | Suzuki Cars & Trucks

1 Answer

Thickness of brake disks for Suzuki Ignis Sport 109 HP, 2004


Generally you do not want to let them wear anymore than 1/16 of an inch either inner or outer pad. The inner pad will wear a little faster than the outer, but you will want to go by which ever one is thinner. As far as the parameters of new disk, they will have a minimum thickness per DOT standards. The minimum thickness is usually stamped on the disk (rotor), if it is not you can get this info from your local repair shop, or auto supply shop.

Nov 10, 2009 | 2005 Suzuki Swift

Not finding what you are looking for?
2004 Suzuki Ignis Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...