Question about Toyota Corona

Open Question

Right setting of distributor wire - Corona Toyota Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the distributor set right and the wires on right and it back fires through the carburetor no matter where I turn the distributor ,do you think it could be the timing chain?


Check cylinder compression, that should tell you something. Yes, I'd want to check valve timing and that the distributor is set properly.
What is year--make--model? My US database will only have info for vehicles sold in this country.

Apr 30, 2016 | Cars & Trucks

2 Answers

What are the to coil packs on a set of spark plug wires on a 2001 4.3 chev blazer for and what plugs do they go on


Your Coil Pack Is Separate And Plugs Into The Middle Of Distributor Cap.Follow The Middle Wire To Coil Should Be On Passenger Side
Easy Quick Change Out. Cost Is Around $40

Mar 11, 2013 | 2000 Chevrolet Blazer

1 Answer

When setting the timing marks together distributor always points to #6 not #1 put new timing chain & gears in but cant get it timed right 5.2


Is it possible to turn the distributor shaft 180 degrees and reinstall the dist ?
I am assuming you have spark at the plugs, just not at the right time ?
If the distributor has not been moved, and the rotor points to the wrong wire, you could have put the cam gear in upside down ?

Jul 01, 2012 | Dodge Cars & Trucks

1 Answer

Need to know what electric connecter to dissconnct before setting timing


Okay locate the distributor and look for a single inline spout coming out of wiring harness to distributor, unplug the connector end , this is like a cap, remove it and set timing then reconnect it,this is located right next to distributor.good day

Aug 17, 2011 | 1988 Ford Taurus

2 Answers

Changed plugs and wires rotor and cap on a 1984 chevy camero v6 now it runs worst then before do i need to adjust timing?


Check the plug wires again. If you have them in the right place then some one has done work on this before and didn't set the distributor in the right spot. Get #1 piston on top at the compression stroke. Pull the cap and see where the rotor is pointing. It should be pointing at the # 1 Cylinder, which is on the right standing in front of the car looking at the engine. If the rotor is not pointing to it, you should pull the distributor and reset it. You will have to use a long flat screw driver to move the oil pump drive gear to set the distributor in the right place. Let me know
Randy
Ps the reason it was probably running bad to begin with, is that the distributor was not set right.

Apr 23, 2011 | Chevrolet Camaro Cars & Trucks

2 Answers

Not sure how to replce spark plug wires from the distributor need help please send info


change one spark wire at a time on the distributor.buy new set of spark plugs wires remove them from box.match old wires with new wires to use the correct length to each cylinder.now if you need to change distributor cap.mark location distributor cap.number tag plug wires on the distributor cap so you can remove plug wires on distributor cap so you can replace cap and rotor and put wires back on the distributor cap in correct place.remember change one plug wire at a time so you wont get confuse.

Apr 15, 2011 | 1992 Ford Tempo

3 Answers

I changed the spark plugs and wires on my chevy s10 2wd pick up, which is a 4 cylinder and now it will not turn over. I might have the wires mixed up on the distributer cap. Can someone show me a picture...


GET A PIECE PAPER DRAW A LARGE CIRCLE TOP UPPER HALF CIRCLE LEFT TO RIGHT WRITE NUMBERS 1 AND 3 BOTTOM HALF CIRCLE LEFT TO RIGHT RIGHT NUMBERS 2 AND 4 THAT YOUR DISTRIBUTOR SPARK PLUGS WIRES LOCATION.STANDING ON SIDE OF ENGINE WHERE DISTRIBUTOR IS LOOKING DOWN AT DISTRIBUTOR 1 AND 3 FIRST TWO SPARK PLUGS TERMINALS NEXT TO ENGINE. AND 2 AND 4 SPARK PLUGS TERMINAL ON CAP FACING YOU. THIS IS CYLINDERS LOCATIONS STANDING IN FRONT OF ENGINE.RUN WIRES FROM DISTRIBUTOR CAP TO PLUGS TO THE ENGINE SPARK PLUGS.

Oct 17, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

Removing honda civic distributor cap & assembly.


The distributor is driven directly by the camshaft. The end of the camshaft contains a set of grooves that engage the distributor shaft. These grooves prevent the distributor from being incorrectly installed.

REMOVAL & INSTALLATION
  1. Using masking tape, remove the spark plug wires from the cap and number them for installation as they are removed.
From 1988-onwards, all Honda Civic series models were fuel injected.
  1. Disconnect the vacuum hoses, the primary wire and the high tension wire. If equipped with fuel injection, remove the four prong connector from the crank angle sensor.
  2. Remove the hold-down bolt(s) and pull the distributor from the head.


5d08c31.jpg

Fig.: Distributor mounting -1992-95 vehicles

033d862.jpg

Fig.: Pulling the distributor from where it mates to the camshaft at the right side of the valve cover

Hope helped (remember rated this help) Good luck.

Oct 21, 2009 | 1992 Honda Civic

1 Answer

HEI DISTRIBUTOR PROBLEMS


on the intake manifold you will see 8 numbers, this is your firing order
from the front of the car the left side numbers are 1,3,5,7 and the right side are 2,4,6,8. now ont the distributor cap there should be a number 1 at one of the plug towers. you start there with #1 plug wireand continue.
on a chevy the firing order is 18436572 and this is the order you put the wires on the cap. now the second problem i don't know right off hand which way the rotor turns on your engine. so remove the cap and crank the engine over and see which way the rotor turns, this is the order you put the wires back on the cap. hope this helps

Aug 24, 2009 | Cadillac DeVille Cars & Trucks

2 Answers

HEI DISTRIBUTOR PROBLEMS


This should help, firing order is counterclockwise, 1,8,4,3,6,5,7,2.c9602d8.jpg

Aug 24, 2009 | 1986 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...