Question about 2003 Chrysler PT Cruiser

2 Answers

2003 PT Cruiser - check engine light

2003 PT Cruiser - 2 weeks ago check engine light said misfire on cyl #1, so we changed the plugs. Now I am getting the same message again. Do I just need a coilpack for cyl #1?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Bosch plat. 4 plugs and wires. U will c a difference 4 sure. I did

Posted on Jul 23, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Use the correct champion plugs for starters, make sure the wire is firing. If the wire is firing, the coil pack is good. You will need to check compression and fuel delivery after that.

Posted on Jun 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Misfire on cylinder 4 on my 2004 PT Cruiser


I changed my plugs and wires and my injectors. No change!! What else could I do?

Jan 11, 2012 | 2004 Chrysler PT Cruiser

2 Answers

2007 Pt Cruiser I Changed spark plugs 2 weeks ago Bosch Platinum +4, car is non turbo 2.4 ltr engine. within 1 day engine light on cylinder 1 miss fire, read on the net changed plugs to Champion RE14MC...


remove the plug from the #1 cylinder, and install it into the #2 cylinder , and put plug from # 2 clyinder in to #1 plug hole, connect plug wires, and start up vehichle, and if computer shows misfire on # 2 cylinder , then you have a bad plug, possibly porcelin insulator could have a hair line crack in it, hope that this information has helped you.

Mar 17, 2011 | Chrysler PT Cruiser Cars & Trucks

1 Answer

I have a 2003 Expedition 5.4L Triton. Two days ago, with low gas (38 miles to empty), engine started running rough. Code read P0302, misfire cyl. 2. Since it had 113K miles, I figured its time to change...


Most likely the coils. Easiest way to check is swap them with another cylinder, start it, pull the plug wire connecter and if it doesn't change the engine the coil is bad. If it is the injector, then you can check it with an ohm meter. Touch the leads in the injector it should read 11 to 15 ohms. if you need help let me know.
Randy

Dec 02, 2010 | 2003 Ford Expedition

1 Answer

My 2003 PT cruiser's engine light came on, then the car started running extremely rough. It became so bad, I had to pull over. Sitting idle, it seems to idle a little rough, but when I gas it gas, it would...


Find your air mass flow sensor in the stiff collar of the air ducting immediately after the air filter. Have the engine running and disconnect the plug to the MAF. If this makes the car run evenly again you need to replace the broken MAF. The misfire on plug 4 I think is a downstream event of the MAF not sending the right info to the ECU and consequently not providing the right fuel / air mix to the engine

Jun 07, 2010 | 2003 Chrysler PT Cruiser

1 Answer

2001 PT CRUISER MISFIRE CYLINDER 2


Do you know how check the engine codes? Turn the key 3 times and the codes will be displayed where the odometer number is displayed.
If the code is 302 it is spark plug mis fire.
It could be a bad fuel injector.

May 26, 2010 | 2001 Chrysler PT Cruiser

2 Answers

Car jerks while taking off; changed fuel filter


get a scan tool to retrieve the dtc (diagnostic trouble code).
you will get a misfire code.
p0301 for cyl 1
p0302 for cyl 2 and so on.
i can't recall if that engine has plug wires or coil on plug but if its coil on plug replace the coil corresponding to the cylinder misfire

Jan 12, 2010 | 2003 Hyundai Tiburon

1 Answer

05 pt cruiser touring turbo code po 302


you have a carbon build up problem try running lucas gas treatment in the car with a full tank of mid grade gas if this does not cure it leave another post and I will give you then next step to fix it, or you can go to http://www.alldatadiy.com and buy a subscription and read all of the recalls and coustmer trouble problems to help locate the problem.

Jun 17, 2009 | 2006 Chrysler PT Cruiser

1 Answer

04 Sedona 3.5 cyl #2 misfire replaced coil,back again 5 mos later


How many miles on the plugs and wires? Misfire can be caused by either plugs or wires, after that check the injector for that cylinder. Let me know what u find. Curt

Mar 11, 2009 | 2003 Kia Sedona

1 Answer

Timing belt broke changed it engine is missing. could it be


The easiest way to test this is to carry out a compression test. This test will determine if any valves are bent. The test is very easy to carry out. 1.obtain a compression tester. 2. remove all spark plugs. 3. screw tester into spark plug hole. 4. with your foot on the accelarator, crank engine. 5. read the tester reading and write it down. eg. cyl 1 175psi cyl.2 170psi etc. if you have a bent valve one cylinder will be very low compared to the rest.

Dec 21, 2008 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
2003 Chrysler PT Cruiser Logo

Related Topics:

681 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...