Question about 1984 Chevrolet Chevette

1 Answer

Have 2 keys one fror doors and other for ignition? misplaced ignition key...can I start with screwdriver or door key?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,002 Answers

No. To use a screwdriver you will have to remove the ignition and if you use the door key you won't have any choice in the matter. Take your VIN number to the dealer and they can give you a key code to get a new one cut.

Posted on Jun 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I turned the ignition on inside the car. The starter will not engage, click, or engage. Is there a security device on the car that prevents this or is this a new starter to be replaced?


Should it still start after bypassing the lock and using the igntion control module with a screwdriver?
Your best bet take it to a qualified repair shop !

May 26, 2017 | Cars & Trucks

1 Answer

Bought a car and the engine key doesn't open then door


If the ignition key does not open either door, the previous owner could have replaced the ignition lock.
The dealer may be able to cut you a door key from the VIN number.

Jan 23, 2014 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

05 CHEVY venture ding ding sound when opening drivers door no key in ingnition sound goes away when start and close door


There is one solution your ignition switch is worn down i guess you cold start your engine whit a screwdriver.

Aug 08, 2013 | 2000 Chevrolet Venture

1 Answer

Coding spare key for a Toyota Echo?


Adding key.
Note:
You must be having one working master key to perform this function.
1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked.
2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.
3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.
4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into ignition and leave it in ignition.
D. Close the drivers door.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Open drivers door.

Jan 09, 2013 | 2001 Toyota Echo

1 Answer

1999 Buick Century Custom Security light blinks and car will not start


someone told me to by getting out of the car and locking the driver door with the key, going to the front passenger door and unlocking, then relocking the door using the key. I have to repeat this step 2-4 times and eventually it will start. ?????????
This has nothing to do with it starting !

This is what's happening , Inside the lock cylinder are contacts that read the resistance of the pellet on the key , the contacts are getting worn out . You have two options , replace the lock cylinder or by-pass it all together .
The PASS-Key II® ignition key (1) contains a unique resistor pellet which is idenified by the Body Control Module (BCM) (2). There are 15 different key (resistor) codes. Only one ignition key resistor pellet code will work with each PASS-Key II® theft deterrent system.
Ignition Key Lock Cylinder
The ignition lock cylinder contains spring loaded contacts which make physical contact with the ignition key when it is inserted into the ignition lock cylinder. This allows the ignition lock cylinder to provide the Body Control Module (BCM) (2) with the resistor code embedded in the ignition key.

GM VATS Key Resistor Key Security Bypass
http://www.autopartswarehouse.com/sku/Buick/Century/Standard/Ignition_Lock_Cylinder/1999/SIUS222L.html?apwcid=bngpla

Jun 29, 2017 | 1999 Buick Century

1 Answer

My Toyota 2001 rav4 remote light stays on it does nt open the doors alarm does not activate


Hi,
The light for the keyless remote fob stays on? If so the battery may need replaced.

Here is link to a remote - LINK.IF this is yours get a battery @ your grocery store.

-open the key fob w/a flat screwdriver
-note the battery's position - is the '+' or the '-' visible?
-replace the batter the same way
-snap the cover back on

To reprogram (should also be in the Owner's manual):

1. Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Close the drivers door
D. Insert the key into ignition and leave it in ignition.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

Oct 18, 2012 | Cars & Trucks

2 Answers

Lost my key and cant statr my car how do i use a scewdriver in the ignition to start it?


you can't use a screwdriver in the ignition switch to start the engine,if you try you will most likely destroy it & have to replace it,( the ignition switch) depending on the model of your vehicle you may be able to go to a dealer & buy a replacement key,if you have an owners manual for the vehicle the key number may be in it otherwise you might have to get a locksmith to see if they can cut you another key.......hope this helps......cheers.

Aug 16, 2011 | Ford Escort Cars & Trucks

3 Answers

Warning bell is on when doors are opened, goes off when shut or ignition on, all lights off, doors shut, normal. open doors with ign. off and bell sounds


I'm assuming that the key is removed from the ignition and it's still chiming..
Take some lock lube spray and spray a bit in your ignition key slot. Then take the key and insert it in and out a few times. This may release a stuck contact in the ign. switch.
The chime will also sound if the lights are left on...worth a check too.
These are cheap fix/checks...hope they help.
k

Jul 10, 2009 | 1999 Ford Escort

1 Answer

I need programming instructions for a 2002 toyota highlander for my remote.


1. Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into ignition and leave it in ignition.
D. Close the drivers door.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

Jun 30, 2009 | Toyota Highlander Cars & Trucks

4 Answers

1998 Ford Windstar GL minivan


the key buzzer switch in the ignition is bad .It is part of the ignition switch.

Oct 03, 2008 | 1998 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...