Question about 2005 Mazda 6

Open Question

How do I change pcv valve 0n 2005 mazda 6 4 cyl

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Mazda 6 oil change

If DPF means Diesel Particulate Filter, no you don't need to change this cartridge. Somewhere near 120000Km you have to refill the additive tank with Eolys additive.

Posted on Jan 26, 2009

  • 155 Answers

SOURCE: 2004 mazda MPv Where is the location of cyl. #6?

The firing order is 1-4-2-5-3-6. The cylinders are, front bank is from drivers side to passenger, 6-5-4 , and 3-2-1 at the firewall.

Posted on Jun 08, 2009

bschilz
  • 2049 Answers

SOURCE: serpentine belt diagram mazda 6 2005

Here are links to the diagram...

If your engine is the 2.3L 4 cyl... http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7042

If your engine is the 3.0L V6... http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6036

Posted on Sep 01, 2009

co7196
  • 3433 Answers

SOURCE: 2004 Mazda MPV vacuum line from pcv valve and

You have the wrong type hose on the pcv valvle. It isn't vacuum hose.

Posted on Nov 12, 2009

Testimonial: "thank you you have been very helpful i understand now but the hose that is on the new pcv valve is a vacuum hose "

  • 1 Answer

SOURCE: how do I change the oil filter on a MAZDA 6 4

You don't need a special tool. Use a 6mm allen to remove the filter drain plug. It will probably start to spin the filter housing. You can remove the housing by hand or with a regular oil filter wrench.

Posted on Feb 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced pcv valve because oil getting in air cleaner but that didn't fix the problem what else could be wrong?


Make sure PCV valve has good vacuum. Valve cover or covers depending if 6 cyl. or 8 cyl. have to be able to flow air in from air cleaner to valve cover thru engine and sucked back up by PCV system. It is possible that the engine just has to much blow by the engine rings.

Jul 14, 2014 | 1985 Ford LTD

1 Answer

Excessive pressure in the crankcase of a mazda 2005 6


Have you checked the hose from the valve cover to the air cleaner ?
The PCV valve pulls air from the crankcase into the intake, but the crankcase has to get fresh air from the air cleaner too.
If the crankcase is getting extra pressure from the cylinders you should have a check engine light and trouble codes.

Jan 15, 2013 | 2005 Mazda 6

1 Answer

On the 2005 escape what is the engine or engines available for that year. i was told one was mazda


(8th digit of the VIN code is the Engine) H eng.code a 2.3L 4 cyl. Hybird/ Z eng. code a 2.3L 4 cyl. / and a 1 eng.code a 3.0L 6 cyl. Couldn't say if one was a Mazda engine. Usually if you have a Mazda part on a Ford it's the Transmission.

Feb 26, 2011 | 2005 Ford Escape

1 Answer

I cannot locate the PCV valve on my mazda tribute 2.3L 4 cylinder engine


It is below the intake manifold, you will need to remove the manifold to access the PCV valve

Jan 23, 2011 | 2005 Mazda Tribute

3 Answers

2005 mazda 3 2.3l that is burning oil (no leaks)


possibly the pcv but check if your cars exhaust smoke is blueish or white in color if it does and your car doesnt have an oil leak then sure its burning engine oil along with fuel, the piston rings is defective, since you replaced engine oil the additive that the owner has put with the oil to prevent blowby is gone thats why it starts burning oil.....

Apr 14, 2010 | 2005 Mazda 6

2 Answers

Cant locate pcv valve on my 2005 mazda 3


Look under the intake manifold on the backside of the throttle body. If its turbocharged, you will have to pull the intercooler out to get to it.

Jan 05, 2010 | 2006 Mazda 3

2 Answers

Where is the pcv valve located on my 1990 mazda mx6


The PCV valve is mounted in the valve cover on the top of the engine. Hope this helped and best wishes.

Sep 27, 2009 | 1990 Mazda MX-6

1 Answer

Pcv valve


the pcv should be on the back side(firewall) of left(drivers) valve cover.

Oct 26, 2008 | 2005 Ford Ranger

Not finding what you are looking for?
2005 Mazda 6 Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...