Question about Subaru Forester

Open Question

How to remove headlight assembley from 2006 forester?

Posted by Anonymous on

3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


open hood,unplug wire to bulb,pulloff rubber boot.There is a paperclip like thing you squeeze,ant bulb will come out.reverse the order.ok

Posted on Aug 21, 2008

  • 2 Answers

SOURCE: passenger side low beam is burn't out, how do I

pop the hood there is a screw at the end of each light toward the car remove those and slide the white slot thing up and pull the head lights forward every thing comes out just turn bulbs to remove and replace

Posted on Apr 12, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to aim headlights-2002 forester

ALL headlights have vertical and horizontal adjustments. The vertical may be obvious, an M8 shaft. Horizontal may be non obvious, or the adjuster is covered with a rubber grommet. Once you've located the adjusters, find a wall eve on mall car park, and see the low beam to the same height. Check high beam, and a just the horizontal as needed.

May 23, 2014 | 2006 Subaru Forester

1 Answer

Remove headlight bulbe from socket on 2011 chevy hhr

there should be like a clip/button to squez on and it should release it from the connector and to remove it from the head assy. turn it counterclock wise to remove it hope this helps

Mar 08, 2013 | 2006 Chevrolet HHR

1 Answer

2006 Pontiac g6 headlight socket was burnt replaced it and it worked for a moment then went out again. What else could be wrong?

Do You mean the bulb or the plug? Is the lense assembley seal broke and water or moisture inside. One drop of water will blow the bulb, also do not handle the new bulb with Your fingers oil from Your skin will also be damage the bulb.

Jun 04, 2012 | 2006 Pontiac G6

1 Answer

How do you replace the headlight bulb on a 2005 Dodge magnum ?

1) pop hood
2) Look at the back of headlight assembly, if you cannot get to the bulb wiring you are going to have to remove assembly
3) remove assembley and disconnect headlight wiring
4)turn bulb retainer counterclockwise and remove bad bulb and install new
5)if you can reach the bulb wiring without taking out headlight assembly all the better you dont have to do step 4

Mar 09, 2011 | Dodge Magnum Cars & Trucks

1 Answer

Instructions for replacing headlight bulb for '98 subaru forester.

Open the hood, reach behind the headlight assembly and carefully turn the lamp assembly counter-clockwise, then remove the pigtail. To install a new lamp, simply do the reverse procedure.

Jan 09, 2011 | 1998 Subaru Forester

1 Answer

Replace the bulb in front right headlight?

You have to remove the entire headlight assembley. The bolts that attach the headlight to the headlight mounting bracket rust and cannot be removed. Their faulty design makes it a job security for mechanics. Their are two screws on top and one on the bottom that attachs to the front frame, you have to remove the fog light and then you can get to the last screw on the bottom. Their are some websites that can sell you the entire assembly for alot cheaper than a parts store.

Dec 01, 2009 | 1997 Dodge Intrepid

1 Answer

Buick LeSabre 2006 High Beam Replacement Procedure

there should be metal or plastic pins that pull up and release the headlight from the car then you just pull the assembley straight out

Mar 15, 2009 | 2000 Buick LeSabre

1 Answer

Replacing headlights

these headlight assembleys are held in with retainer slides at the top of the light assembley, simpley push rearward and pull up thay should slide straight up. thare are 2 per headlamp.

Aug 11, 2008 | 2001 Ford Expedition

1 Answer


open hood,unplug wire to bulb,pulloff rubber boot.There is a paperclip like thing you squeeze,ant bulb will come out.reverse the order.ok

Aug 07, 2008 | 2006 Subaru Forester

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

10 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides