Question about 1998 Citroen Saxo 1.1

Open Question

Changed ignition barrel car want start

Lost car keys to car. so got another ignition barrel and fitted it but the imoboliser want let the car start

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car won't start. And when I take my key out of the ignition the lights stay on and flicker. first slow then faster and faster.


If it isnt something as simple as a Flat or Low Car Battery it could be the key fob battery.

Sounds as if the imoboliser unit is playing up because of a battery fault..
Check the battery is not low in your key fob.
It is probably easier to Just change the battery in the key fob and should be just a few Pounds or Dollars .

Oct 10, 2014 | Cars & Trucks

1 Answer

My key broke off in ignition. What do I need to do in order to change ignition?


have a locksmith remove the barrel of the lock and fit a new barrel that is tumbler coded to the existing barrel. That way your spare key will still be encoded for the immobiliser.

Jul 28, 2014 | Cars & Trucks

2 Answers

Ignition switch in Toyota Land cruiser not working


sounds like the inside workings of the barrel are worn out or broken. you will probably need to take the barrel out and replace it . Before you put the new barrel in you may need to take both new and old barrel to a locksmith and get them to change the slides over from the old one to the new one, or you can do it yourself but it is a bit fiddly. If you don't change the slides then the new ignition key won't fit the doors as well as the ignition. hope this helps

Nov 24, 2012 | Toyota Land Cruiser Cars & Trucks

1 Answer

Hi, I have a suzuki swift 2000 model, the key has snapped in the ignition, i have a used replacement ignition barrel and key. When fitted the engine turns over but won't start. I'm guessing th


This car has a chip key, you can't just put any old key in it it must be programmed to not turn on the security system and disable starting, which is what you have now, the system has locked you out.

Feb 10, 2012 | Suzuki Swift Cars & Trucks

1 Answer

I have an Isuzu Rodeo and the key is stuck in the ignition any idea how to get it out? Year 2000


replace the whole ignition barrel with new key and get key programmed by dealer
can remove barrel and key by removing steering column covers turn ignition to on position and with small shank screw driver push in hole in outer top rear section of barrel assembly then pull out ignition lock barrel with key in it. fit new lock barrel and key, program new key into system and can get door lock barrels coded to suit new key or get code for old key and cut new key so it fits mechanical locks on the rest of the vehicle (just wont turn in ignition) 2 keys for vehicle.

Jun 13, 2010 | 2000 Isuzu Rodeo

2 Answers

Key broken off in ignition barrel - how do I remove the barrel?


not saying it is landrover barrel but best way is get your new barrel and that should tell you how it is fitted normally a spring loaded pin holds barrel in socket

Mar 20, 2010 | 1994 Land Rover Discovery

1 Answer

Have fitted a new ignition barrel, car not running


did u try changing code reader on the barrell? it mite not be picking up the code on the key

Nov 07, 2009 | Volkswagen Golf Cars & Trucks

3 Answers

How to remove ignition lock cylinder without the key


How to remone 1998 windstar GL (3.8 L) Ignition Locl.

Oct 06, 2009 | 1998 Ford Windstar

2 Answers

When i start my car it just cuts off again this happens a few times then works fine, also after a few miles of driving the abs warning light comes on my car is an N reg audi A4 automatic 1.8


Hi, I had the same problem. it is the imoboliser, it reads a code in your key while starting. you need to get the code in the key reprogramed. if that wont work you will need to get a new ignition barrel. Audi dealer will reprogram your key.

May 18, 2009 | 1996 Audi A4

Not finding what you are looking for?
1998 Citroen Saxo 1.1 Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citroen Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14184 Answers

Are you a Citroen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...