Question about 2007 Nissan Versa 1.8 Sl Hatchback

Open Question

No throttle pedal response in nissan versa 2007

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 165 Answers

SOURCE: 85 nissan 300 zx turbo throttle probs

check the connector for the MAF mass air flow sensor and TPS throttle position sensor. Unplug them and look at the terminals to see iof they are green with oxidation. if so, clean them with a tiny file, like a fingernail file but narrower, or jewelers file. somthing that will fit into the plug and scrape the crust off the contacts. after that, fill the plug and sensor with dielectric greese, like silicone greese they use for spark plug wire boots.to seal out the moisture.

Posted on Dec 12, 2009

  • 1 Answer

SOURCE: how to change a headlight on nissan versa 2007

How to change a headlight on Nissan Versa 2007. Open the hood, pull the power cable off of the headlight. Peel off the large black rubber cover. There is a metal clip you must push in and then out to unclip. The bulb will then slide out for replacement.

Posted on Jun 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace head light on Nissan Versa Hatchback 2007


The average price to replace a headlight on a 1994 Nissan, especially if you did it yourself, would be about $10.
if you need a tool you can click here:great tools

Oct 20, 2012 | 2007 Nissan Versa 1.8 Sl Hatchback

3 Answers

Error code p2138


Here is the definition. You may need to have someone check the accelerator pedal position sensor and the circuit.

P2138 NISSAN Description The Accelerator Pedal Position (APP) sensor is installed on the upper end of the accelerator pedal assembly. The sensor detects the accelerator position and sends a signal to the Engine Control Module (ECM).
Accelerator pedal position sensor has two sensors. These sensors are a kind of potentiometers which transform the accelerator pedal position into output voltage, and emit the voltage signal to the ECM.
In addition, these sensors detect the opening and closing speed of the accelerator pedal and feed the voltage signals to the ECM. The ECM judges the current opening angle of the accelerator pedal from these signals and controls the throttle control motor based on these signals.
Idle position of the accelerator pedal is determined by the ECM receiving the signal from the accelerator pedal position sensor. The ECM uses this signal for the engine operation
such as fuel cut.
Read more: http://engine-codes.com/p2138_nissan.html#ixzz26J3D2x8s

Sep 12, 2012 | 2010 Nissan Versa 1.8

1 Answer

I recently changed the sparks plugs on my 2007 Nissan Versa and now I am getting random idle problems while my car is in park. The car will idle from 1400 rpms them all of a sudden jump up to 2100 rpms and...


If your check engine light is on have it scanned for fault codes. Also check to make sure you don't have a vacuum leak, you could of pulled a hose loose accidently when you changed your plugs.
Signals from the oxygen sensor, and/or a bad throttle position will also cause engine surge.
Good luck, i hope this helps.

Jun 28, 2011 | 2007 Nissan Versa 1.8 Sl Hatchback

2 Answers

2007 Nissan Versa brake lights not working................. fuse is ok. All other lights are working


Did you check the bulbs ? If they are Ok,then check you brake light switch which is under your brake pedal. Good luck

Jan 09, 2011 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

Does 2007 altima 3.5 have a chain or timing belt


After 2002 Altima offers two types of engine: the new 4 cylinder 2.5 L QR model engine which is fairly powerful (175 horsepower) and, I believe, one of the best engine in its class the 3.5L V6 VQ model engine with 240 horsepower. The same V6 model as in in the Nissan Maxima, Pathfinder and Murano.
Both engines feature continuously variable valve timing using a silent chain instead of timing belt. Throttle cable is gone - the throttle operates electronically by wire based on gas pedal sensor readings. This design provides smoother transmission shifting and lower emission.
The 2007 Nissan Altima 3.5L Sedan, has a Timing Chain, and an Ignition Coil Pack. NO DISTRIBUTOR.

Nov 14, 2010 | 2007 Nissan Altima 3.5 Sedan

1 Answer

How do you replace a brake switch for a 2007 nissa versa


They are normally near the top of the brake pedal. Probably held in place with several screws or bolts.

Oct 14, 2009 | 2007 Nissan Versa 1.8 Sl Hatchback

1 Answer

Car will idle but there is no response when


This car uses "drive by wire" technology and uses a sensor to measure gas pedal movement. This sensor the transmits the info to the engine. So there is no mechanical throttle cable. You might have a bad accelator pedal sensor or it could have a loose wire. Take a look under the dash at the pedal and see if you can locate the sensor and verify it is still connected.

Oct 11, 2009 | 2003 Nissan 350Z

1 Answer

No accerlation when pushing on gas pedal


IT may be as simple as a failed throttle cable (the cable may have come of its routing too)
Get under the hood and look at the thottle body which you can actuate by hand (van in park, break on) with the engine running the engine should rev by moving the throttle body.
I hope this may have helped,
Tom

Sep 18, 2009 | 2007 Nissan Versa 1.8 Sl Hatchback

2 Answers

2007 Nissan Versa gear shift locked in Park. My Versa will not shift out of park unless i push the shift lock button. What could be the problem?


There is a switch under your break padal, which is responsible for tail lights and gear lock. if that switch is working fine and your tail lights are working fine then check the electronic lock of gear which is under the cover of gear.

Mar 12, 2009 | 2007 Nissan Versa 1.8 Sl Hatchback

2 Answers

Issue with throttle control on my 2003 Maxima


I discovered that its the throttle body sensor. Its not sensing the postion of the foot pedal. The throttle body has a sensor that is linked to your gas pedal via a cable. The spring that the repair man mentioned could be the issue. The sensor then communicates to the computer the position and then computer then applies fuel, the mass air sensor then will communicate to the computer and the computer will then allow more or less air to fuel ratio. So if your stomping on the gas and there is not any response, then your throttle body sensor is most likely going out.

Nov 21, 2008 | 2003 Nissan Maxima

Not finding what you are looking for?
2007 Nissan Versa 1.8 Sl Hatchback Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...