Question about 2007 Toyota Avanza 1.3

Open Question

Brake fluid location - 2007 Toyota Avanza 1.3

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of brake fluid container


On both of the vehicles that i have, the brake fluid resivore is located on the drivers side. It is usually mounted by the wheel well. It has maybe 6 or 7 small pipe lines comming of of it. If the fluid resivore is empty you will have to bleed the brakes which is a whole diferent thing. If you think ou have to bleed the brakes let me know and i will give you more instuctions.

Aug 09, 2012 | 2001 Kia Sportage

1 Answer

Where in the engine do i add brake fluid for suzuki wagon r


Brake fluid is always added to the brake master cylinder. The brake master cylinder is always located directly in front of the brake pedal in the engine compartment.
You should never have to add brake fluid. The brake hydraulic system is a sealed circuit and the fluid does not evaporate, nor does the brake fluid need replenishing due to "normal use". If you are having to add brake fluid to your master cylinder, there is a serious problem with your brakes that needs to be fixed.

Apr 04, 2011 | 1996 Suzuki Swift

1 Answer

The brake indicator light is flickering.


If it's flickering while driving, check to see if your brake fluid level is at max level line.
if not at max, add more fluid.
if at max, check brake reservior cap. there should be a float on a stick located under the cap. There shouldn't be any brake fluid inside the float.
If there's fluid in the float then replace brake resercior cap.
note:The float set the brake indicator light to let you know that brake fluid are low. Brake fluid inside the float cause it to sink making the car think that fluid are low.

Dec 14, 2010 | 2003 Honda Pilot

2 Answers

Where is the mastercylinder?


it is located on your driver side on the fire wall...right where u put brake fluid in....not the canister but behind it...its a big round thing ....hope this helps

Sep 03, 2010 | 1998 Honda Accord

1 Answer

My brake light is continuosuly on


Often, the brake light on is an indication that the brake fluid is low. You need to locate the brake fluid reservoir in the engine compartment, and check that the brake fluid is up to the recommended level. You can easily top off the fluid, but if it is low this means there is a leak somewhere in the brake system, that needs to be located and repaired. If the brake fluid level is ok and the light is on, the brake system needs to be inspected. Good luck and let me know if you have any questions.

Mar 30, 2010 | 2003 Mitsubishi Galant

2 Answers

Location of the brake fluid input


the brake fluid resivoir is above the master cylinder on the firewall. so on the left side near the windshield. the power steering resivoir is closer to the front end and is distinguished by not being connected to the master cylinder..

Feb 08, 2010 | 1987 Mercedes-Benz 300-Class

1 Answer

Location of the emergency rear brake switch n a


Hello. I assume that you want to know the location of the switch that activates the brake light on the dash when the park brake lever is pulled. It is under the rear of the park brake handle; you need to remove the console to see it.

However...if your brake light in your dash is staying ON, I would first suggest that you look at the level of brake fluid in the master cylinder reservoir. If it is low, the light will come on, also. The fluid level in the master cylinder drops proportionally as the brake wear. I would bet that your fluid is low; about an ounce of fluid decrease will light up the brake light.

Dec 26, 2009 | 2002 Toyota Corolla

1 Answer

The brakes suddenly went out in my 1998 saturn wagon


Open up the hood and locate the brake fluid reservoir and see if there is fluid init if there is no fluid the brake line has busted somewere inbetween the master cylinder and one of the 4 brakes. to find were it is broken fill the resivore full of fluid and put the cap back on now have some one pump the brakes slowly and you should see a stream of fluid coming out some were. this is were your line is busted. if you located the brake you can go to an auto parts store and get a compression coupling to splice in a new part of the brake line.
hope this helps you out
please leave me a rating
Thank you

Apr 21, 2009 | Saturn SW2 Cars & Trucks

3 Answers

Brake Fluid Sensor


check autozone .com, they have online manuals.

Mar 07, 2009 | 1999 Honda Passport

1 Answer

Brake Fluid Type? 2000 KIA Sephia


any aftermarket brake fluid will be fine. the actual grade is located on the top of the fluid cap. you can find the universal grade at your local auto parts shop.

Mar 01, 2009 | 2000 Kia Sephia

Not finding what you are looking for?
2007 Toyota Avanza 1.3 Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...