Question about Cars & Trucks

Open Question

I have an old petersime model #1 incubator. I would say it holds 300-400 eggs. We replaced the thermostat after our first attempt at a hatch " cooked" the eggs. It seems as though this may not have been the problem, as the next batch also literally cooked. We put a 99.75 degree thermo in it. We need a manual!. Can you help?

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3600 Answers

SOURCE: 2004 Dodge Ram 1500 4.7 liter running Hot

Try washing the radiator look to see if it's filled with bugs, if it is back wash it out at a car wash, if that is not the problem look at the radiator cap and see if the rubber is cracked, if it is replace it, without a good cap antifreeze will boil at 212 degrees if that does not fix it take it to a radiator shop and have them pressure test the system, this will show any hair pin leaks that you would not otherwise see. Here are other things that could cause it, running to lean plugged catalytic converter or exhaust pipe, blown head gasket. Fan clutch bad.

Posted on Jun 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How long do ducks sit on eggs to hatch?


Duck eggs typically hatch in 28 to 35 days. Commonly-raised breeds of ducks, take 28 days. So about 28 to 35 days.

Mar 25, 2017 | Cars & Trucks

2 Answers

Do akes lay eggs or do they birth


Depends on the snake.

Not all snakes lay eggs--70% of them do, while the rest give live birth. Snakes that give birth to their young without laying eggs are called viviparous. These snakes live in colder climates, where eggs would not incubate as well. Snakes that lay eggs fall into two categories, oviparous and ovoviviparous. The eggs have a hard shell that protects them, and they are usually placed under leaf litter or loose soil, or within a hollow stump or burrow.

How Do Snakes Lay Eggs eHow

Jun 17, 2016 | Cars & Trucks

1 Answer

How long does the eggs take to hatch from laying until hatching in soil


If they are Dragon eggs, you must hatch them in an inferno, preferably on a wood altar.
Hey, you asked.........

Feb 14, 2015 | Cars & Trucks

1 Answer

Replace hatch opener


You need to remove the vinel panel from the rear hatch.Peal back plastic from access hole. Remove 4 hexnuts that hold the tag light , hatch switch and window controller assemply in place.Pop loose assembly from hatch, remove 2pl head screws that hold opner switch to assembly didconect wireing conector. install new switch.

Aug 25, 2012 | 2007 Toyota 4Runner

1 Answer

2005 ford freestyle hatch will not stay up can it be the hatch struts? If so can I replace them myself?


YES, most likely the struts on the rear hatch door have become weak. YES, you can replace them rather easily. you will need a flat tip srewdriver to pry the old one off and someone or something to hold the door up while snapping the new on into place on each side.

Aug 16, 2011 | Ford Freestyle Cars & Trucks

2 Answers

I need to replace plastic on the tail light of a 1990 pulsar hatch and cant see how to get the old one out, there seems to only be one screw holding it?


The fasteners may be behind the interior panel of the hatch. Take the one screw out, and if that doesn't release the light, then look for the interior fasteners.

Jan 03, 2011 | 1990 Nissan Pulsar

1 Answer

How do you replace a trunk strut?


If you are talking about the gas-charged units which hold the rear hatch up there is a clip which snaps off each end. With the clip off you pull the socket end off and then the hatch falls on your head. Get some new units on ebay, about 50 bucks a pair. When you have the new ones in your hand you will see the socket and clip. After you take the old ones off put some grease on the ball befoire you snap the new ones on. Make sure you have someone or something there to hold the hatch up while you do this.

Oct 25, 2010 | 2003 Cadillac CTS

1 Answer

Trunk door will not stay open by itself


Hi:
Your gas struts that hold up your hatch have weakened or failed. Good news is they are easy to change and not too expensive. Usually about $20 each, but replace them both...You will need help to hold the hatch while you pop out the old ones.

Nov 19, 2009 | 2003 Honda Pilot

1 Answer

Replacement hatch strut problem


It is better to have someone help you hold up the hatch (very heavy). Remove the old struts, then install the bottom of the strut first. While moving the hatch up or down align the pin and snap in place.

Apr 13, 2009 | 2005 Honda Odyssey

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...