Question about 2006 Jeep Liberty Limited

Open Question

What happens when the ecm goes out on a 2006 jeep liberty 4x4 sporty

ECM

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 137 Answers

SOURCE: Inoperable Power Window 2006 Jeep Liberty

the window regulator needs to be replaced

Posted on Jan 19, 2009

Ad
Mikey108
  • 475 Answers

SOURCE: i have a 2006 jeep liberty and three lights are staying lit and

You need to take the jeep to a dealer or a good mechanic who can retreive the codes out of the computer. You may have a module problem but I will not guess without knowing the codes.

Posted on Feb 11, 2009

clarktravis8
  • 74 Answers

SOURCE: 2003 jeep liberty sport 4x4

It means that your transmission is probably slipping check your fluids and have you transmission filter changed also change your plugs your check engine lite should go out. Please rate me any further assistance you can always ask me. 1ak+f4pj7cbm32cuniyi2gaaaaaelftksuqmcc

Posted on Apr 25, 2009

  • 16 Answers

SOURCE: power mirrors stopped working

If both power mirrors stopped working at the same time it has to be a fuse or the switch has come unplugged, or it has become defective. mike
micmor68@gmail.com

Posted on Nov 02, 2009

ZJLimited
  • 17970 Answers

SOURCE: i need a wiring diagram for 93 jeep grand cherokee

Review the Jeep ZJ Secc-8W-Wiring-Diagrams

Hope helped with this. Good luck (remember rated this help).

Posted on Nov 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What wire goes to the maf sensor and iat sensor on a 2006 jeep liberty sport 3.7l 4x4????


its useless.
stop doing that
stop wasting time , money and breaking the law (usa )
if you cant believe the truth,
then call them , the criminals.

Sep 13, 2014 | 2006 Jeep Liberty Sport

1 Answer

P0340 Problem Code for 03 Jeep Liberty


code p0340 refers to cam shaft position sensora bank 1-circuit malfunction===causes --wiring Cam sensor---ECM. The only connection is the ECM to both units so they may have unpluged the ECM to service the air bag problem. IT could be as simple as using a code reader to reset the CPU. I may also be a coincedence and there may be a fault in the cam position sensor.. I would discuss the matter with the dealer service department to determine what is what.

Oct 23, 2013 | 2003 Jeep Liberty

1 Answer

2002 Jeep Liberty Sport with the 2.4L (manual Tran.) Speedometer stopped working, Check engine is on, and now it's stalling between shifting and at low rpm.


Speedometer cable may have broken. You can't tell from the outside of the cable, since it has a plastic shield. You have to disconnect it from the transmission to check it. If you can turn the cable inside the shield easily, it is broken.

Apr 30, 2012 | 2002 Jeep Liberty

1 Answer

Diagnostic Trouble Code 332 JEEP LIBERTY ? WHAT IS THIS ?


2005 Jeep will be OBD II compliant and the trouble code(s) will be 4 digits after a P,B or U. Are you sure you wrote it down right?
For example P0332 for your car is Knock Sensor 2 Circuit Low Input (Bank 2)

Potential causes for a P0332 DTC include (but are not limited to):

  • The knock sensor is faulty and needs to be replaced
  • There is a wiring open/short/fault in the knock sensor circuit
  • The PCM/ECM has failed
Possible Solutions
  • Verify the resistance of the knock sensor (compare it to factory specs)
  • Inspect for broken/frayed wires leading to the sensor
  • Check the wiring and connections leading to/from the knock sensor and PCM/ECM
  • Verify proper voltage is reaching the knock sensor (e.g. 5 volts)
  • Verify proper grounding of sensor and circuit
  • Replace the knock sensor
  • Replace the PCM/ECM

Jan 25, 2011 | 2005 Jeep Liberty

1 Answer

I have a 2006 Jeep Liberty...The Part Time 4wd light is ON then goes OFF when I engage the 4wd....any ideas..?


it is just a faulty 4x4 or 2wd fuse. the fuse for these two are in the fuse box under the hood in front of the battery.

Jan 09, 2010 | 2005 Jeep Liberty

2 Answers

2003 Jeep Liberty Stalls


thats correct, may have bad ecm (computer) or bad wire to crank sensor from ecm, also ive run into this problem and it was the new sensor i put in was no good and aftermarket,also cam sensor can do this, and also make sure the 5 volt feed wire is good,good luck hope this helps.

Oct 13, 2009 | 2002 Jeep Liberty

1 Answer

2008 jeep liberty navigation safety disable question


Can't be done. All the safety items are controlled by the ECM.
If the ECM senses the car moving via the speed sensor, it will disable the nav. To disable the safety would be to disable the computer and the car will not run.

Feb 15, 2009 | 2008 Jeep Liberty

Not finding what you are looking for?
2006 Jeep Liberty Limited Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...