Question about 2009 Chrysler Town and Country

1 Answer

Blower control relay location

Blower relay location in the fuse box

Posted by on

  • 2 more comments 
  • Mike Butler
    Mike Butler May 17, 2014

    Hi emchugh107, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?
    What problem are you having? I suspect your looking for resistor that controls fan speed and operation ? Look under dash on passenger side where ducting is and follow blower motor wires back to connection. That connection is your resistor. Removal of glove box may make it easier if you find it.

  • emchugh107
    emchugh107 May 17, 2014

    iT IS UNDER THE GLOVE AND UNDER THE SOUND PROOFING MATERIAL ON THE LEFT SIDE

  • emchugh107
    emchugh107 May 17, 2014

    REMOVE 2 PUSH PINS AND 2 7MM SCREWS ITS ON THE LEFT

  • emchugh107
    emchugh107 May 17, 2014

    AFTER ALL THAT I JUST GAVE THE MOTOR A WHACK AND ITS BEEN RUNNING EVER SINCE ,GIVE THAT A TRY

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Must mean the motor is going bad. If it happens again and whacking it don't help, you'll need to replace the blower motor. If the blower resistor goes bad, the blower still works on high only.

Posted on Jun 18, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 55 Answers

SOURCE: Chrysler Pacifica - Cruze Control

There is no cruise relay

Posted on Oct 18, 2008

  • 1243 Answers

SOURCE: fuse box diagram

under the hood on the left side of the engine compartment.

Posted on Jun 09, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 TAHOE FRONT BLOWER NOT WORKING, APPLY DIRECT 12VDC TO FAN AND IT WORK. REPLACE NEW BLOWER RESISTOR AND STILL NOT WORKING. NO POWER TO THE ORANGE WIRE! FUSE CHECK OUT OKAY.


Manual or automatic climate control ? Which orange wire . There are two . Blower motor relay for high speed . FRT/ HVAC fuse 30 amp located in the under hood fuse/relay box . HTR-A/C fuse 25amp. located in the left I/P fuse box .

Aug 01, 2017 | Cars & Trucks

1 Answer

2004. Why is the blower motor not receiving power?


The blower motor relay in the auxiliary junction box under the hood is good ? All relays ? only one controls the blower motor ! The electronic automatic temperature control module turns it on by supplying a ground inside the module ! The 30 amp fuse for the blower motor is located in the under hood auxiliary junction box ! At the relay socket test for battery voltage at pins 30 an 86 ,power form 30amp fuse ! The other two pins 85 an 87 ,85 is circuit to the electronic temperature control module . You could test this part of the circuit too , with a test light or volt meter . But if no voltage to the blower motor ,could be the electronic temperature control module is bad ! VEHICLE RELAYS Operation Diagnosis

Jun 11, 2015 | Lincoln LS Cars & Trucks

1 Answer

Where is the heater ac blower relay


old post,,,, but others might find it useful.
in the fuse box. on all suzu.
see oper, guide for fuse info see if it show the relays
some guides, shows them as blank.
that means , its covered in FSM... factor. serv. man.
did you even look on both boxes both have labels....>????
blower fail on high?
is the fuse good, that is first not relays

this car has a HVAC control module HCM.
so the blower works in this path
fuse, > relay, >> blower power transistor module>>> HCM
the HCM inputs must be correct or i will not turn on the BPTM.
4 fuses, related. min.
and sensor inputs.

did you try a scan tool yet
to see if there ARE HCM DTC errors


location of relay
the relay is in TIPM box 2
grengo for , fuse box 2.

location 19
bottom right relay
seen here.

28e66be6-f29a-47d3-ba91-672f2f8890a5.jpg

Jun 26, 2014 | 2006 Suzuki Grand Vitara

1 Answer

2006 tacoma heat/air blower fuse location


Hello! Coil of Heater Relay is supplied through Fuse "IG1 2" (10A)...Located in the Drivers Side Box...Contacts of Relay are supplied through "Heater Fuse (50A)...Located in Engine Relay Box...Blower Motor has a 2 wire connector with wire colors: Black/Yellow (Pin 2)...And White/Blue (Pin 1)...Pin 1=Ground and Pin 2=Battery when Relay pulls and contacts close...
The Blower Resistor Pack (Which fails often) controls the fan speed...BUT, there is a fuse inside the assembly...If it blows = No Fan...Located on the top of the heater/AC box and can be accessed through the Glove Compartment...Guru...Saailer

Jun 01, 2012 | 2006 Toyota Tacoma

1 Answer

Need location of rear blower relay 2001 expedtion


Here is the order of checking....

Power Distribution Box Description
Position 114 30AMP** for Climate Control Auxiliary Blower

** MaxiFuse


Passenger Compartment Fuse Panel
Position 7 5AMP for Aux A/C Blower Relay (via fuse 22)
Position 24 10AMP for EATC Module, EATC Blower Relay, Climate Control Switch Assembly (Feeds Fuse 7)


Also, additional details about fuses could find in ford.com/maintenance/owners_manuals

Hope helps.

Feb 04, 2011 | 2000 Ford Expedition

4 Answers

Heater on my envoy only works on 3-4 setting, could that be the switch.


Thanks for the opportunity to let me help. The blower control switch in your vehicle also uses a blower relay. This relay is generally located on the firewall on the passenger side near the heater fan. You can also look in you vehicle owners manual for the location of the blower relay, it may be also be located in the fuse and relay box under the hood. Generally speaking if the highest setting doesn't work on a GM vehicle it is a high blower Relay. This item is not expensive and can be purchased at most all you local Auto parts stores. If you have a Napa, Orielly's, or AutoZone these stores will also likely help you in the location if you are unable to locate this relay. Here is a general picturepepsiman1967.jpg The installation of this relay is either to remove from the fuse box, or if located near the heater fan housing then you will need to remove the mounting screws, remove the wiring clip, then reverse to install. I hope that this has helped you. D.R. Wilkins

Nov 05, 2010 | 2004 GMC Envoy

1 Answer

Heater control for fan blower not working. stopped working for about a day then started working again for a day then stopped altogether dead since.


check the blower motor relay, located under the hood fuse/relay box. turn the system on and tap the blower motor see it works. The blower motor located under the glove box.

Apr 19, 2010 | 1992 Honda Civic

1 Answer

1992 Cadillac Coupe Deville blower fan runs all the time


The BLOWER MODULE is located on the A/C EVAPORATOR housing located UNDER THE HOOD passenger side firewall. Has 2 electrical connectors. Mounted with 4 screw bolts.Hope this helps

May 20, 2009 | 1988 Cadillac Sedan DeVille

Not finding what you are looking for?
2009 Chrysler Town and Country Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...