Question about Cars & Trucks

1 Answer

Toyota sienna 2001 won't go in reverse but it goes forward

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Does it crunch? If you lift the clutch and then press it down whilst trying to get it into reverse as this lets the cogs move allowing you to slip the drive into the gears this may allow you to get it into reverse. So here's the steps:
1 start the the engine
2 drive the car for about 10 kms
3 try and get the vehicle into reverse
4 lift the clutch whilst holding the stick in the gate ( you should feel the cogs turning and shaking the stick)
5 then push the clutch down again
6 if it still won't go repeat step 4/5
if it still won't work then try and get it into reverse whilst stationary and then start the engine it will jolt but can free up the gears!

hope this helps :)

Posted on May 15, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

autotherapis
  • 501 Answers

SOURCE: i changed transmision fluid of toyota sienna 1998

Changing the fluid will never harm your trans unless you do not fill it back up.

Reverse is all hydrolic. There is no electrical that could cause it. If you have park and forward, you don't have a lincage problem.

As much as I feel for you, (I satarted rebuilding transmissions in the 80's) you will have to get it rebuilt.

Sorry

Posted on Sep 03, 2009

  • 114 Answers

SOURCE: i can't find knock sensor location bunk 2 toyota sienna 2001

It's under the intake manifold...oh joy

Posted on Sep 19, 2009

Testimonial: "you are a nice guy. i'm so gratefull you have this in the networth. thanks."

  • 1 Answer

SOURCE: 2001 toyota sienna power mirror/ clock not working...

There is an interior fuse panel located on the left side of the steering column, behind the "change compartment". You just pull it out and you will see a fuse diagram on the back. The fuse you want to replace is the fuse for the cigarette lighter, it is a 15 amp fuse and is located on the bottom right.

As far as I can tell, the owner manual makes no mention of this interior fuse panel and furthermore the actual fuse for the cigarrette lighter doesn't mention that it is connected to the clock and the power mirror.

Posted on Jan 30, 2011

  • 1 Answer

SOURCE: My 2002 Toyota Sienna stalls when I put the car in

My 2002 Sienna just started doing this exact same thing. Curious if you ever found out what was causing this to happen?

Posted on Jul 20, 2011

Autotroubles
  • 987 Answers

SOURCE: I changed the battery in

Press station 1 and 6 and turn the ignition key to on position but donot start the vehicle, you will see the unlock code flashing, note the number that is your radio code, read your vehicle manual and insert code to unlock.

Posted on Aug 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My toyota sienna 2002 turn on and goes in gear but when i accelerate forward it stalls


Check fuel pressure...may not have enough to drive.
Clogged air filter can choke it out....I've seen mice and stuff clog up pipes to filter/air intake.
Make sure car is rolling normally....Stuck brakes can cause it not to move well.
Good Luck

Sep 19, 2015 | 2002 Toyota Sienna

1 Answer

Como quitar la luz de chek engin en una toyota sienna


english please. (google translated for you)
How to remove chek engin light on a toyota sienna

1: scan it.
2: see the DCTs, find cause , fix cause , and CEL goes out.

we scan it, to get the errors,we diagnose the cause and do the corrective repairs.
all cars 1988 to now.

Dec 30, 2013 | 2001 Toyota Sienna

1 Answer

Starter won't turn on 2001 sienna, only clicks


check the starter relay the wires could be bad and there should be a fuse for the starter check that to

Sep 09, 2012 | 2001 Toyota Sienna

2 Answers

I changed the battery in my 2001 Toyota Sienna and now my radio won't work.


Press station 1 and 6 and turn the ignition key to on position but donot start the vehicle, you will see the unlock code flashing, note the number that is your radio code, read your vehicle manual and insert code to unlock.

Aug 11, 2011 | 2006 Toyota Sienna

1 Answer

2001 Toyota sienna


hi..my van is toyota sienna 2001,now the airconditiner is leak and i want to made to new hose or do it somthing.can you help and show me how to do it,please. thanks so much.

May 05, 2011 | 2001 Toyota Sienna

1 Answer

1998 Toyota Sienna. Problem: Passenger side windows won?t go up. I have replaced window motor but still won?t work. I don?t hear the new motor running when I use two (driver and passenger) switches. I...


Have you tried replacing the master window switch? Just because the other windows work doesnt mean that switch for that window is good.

The main switch is controled by the drivers door main unit.....i had to use a forward force on my windows switch for it to work....so replaced the whole unit, you could find those on ebay cheap if local auto parts is expensive

Nov 06, 2010 | 1998 Toyota Sienna

1 Answer

Back wheels have locked up


Check the calipers for sticking, also check the lever where the e-brake cable connects to and makes sure the lever operates smoothly. You may need an assistant to operate the e-brake.

Mar 06, 2010 | 2004 Toyota Sienna

1 Answer

I changed transmision fluid of toyota sienna 1998,after ten days reverse gear not working only forward gears working,what is cause,no check light on dash board.


Changing the fluid will never harm your trans unless you do not fill it back up.

Reverse is all hydrolic. There is no electrical that could cause it. If you have park and forward, you don't have a lincage problem.

As much as I feel for you, (I satarted rebuilding transmissions in the 80's) you will have to get it rebuilt.

Sorry

Sep 03, 2009 | 1998 Toyota Sienna

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...