Question about Ford F-150
P1000 means a drive cycle has not completed, it will only clear itself
after driving the vehicle through certain driving conditions. If you
try to clear the code, it will reappear until you repeat the drive
cycle. I am not too familiar with what AE will show, but if you can
access Mode 6 data or the OBD Drive Cycle(These are two options from
the IDS at Ford), It may help to show what tests have either failed or
not completed. Heres what must be done to clear the P1000:
Note: The IAT PID must be between 10-38°C (50-100° F) during the OBD II drive cycle to enter into all the OBD II monitors. The FLI PID must be between 15% and 85% at all times.
Drive in stop-and-go traffic with at lease 4 idle periods (30 seconds each) while observing the status of the OBD II monitor on the scan tool. If the exhaust gas recirculation (EGR), heated oxygen sensor (HO2S), evaporative emission (EVAP), secondary air (AIR) (if applicable) or catalyst efficiency monitor have not completed, drive on the highway at a constant speed over 64 km/hr (40 mph) not to exceed 104 km/hr (65 mph) for up to 15 minutes. Heavy accelerations, sudden decelerations and wide open throttles are not recommended. If the scan tool sends out a three pulse beep at any time, the OBD II drive cycle has completed.
If there is only one certain component that hasn't completed its test, there are individual driving conditions to help those tests pass or fail if something is wrong.
Posted on Jun 23, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 29, 2016 | 2006 Ford F-150
Dec 29, 2015 | Cars & Trucks
Jan 21, 2015 | Cars & Trucks
if code comes back do another pcm scan and make sure it completes most parts stores can do a scan for you with no charge ...i.e. advance ,auto zones , oriellys I know do for free
Oct 13, 2013 | Cars & Trucks
Aug 14, 2010 | 1999 Ford Escort
Nov 08, 2009 | 2006 Ford Mustang
Aug 30, 2009 | 1999 Ford F150 Regular Cab
Apr 20, 2009 | Ford Taurus Cars & Trucks
4,838 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: