Question about Mitsubishi Cars & Trucks
Check the battery cables on the battery, making sure they are clean and tight. From what you describe, it is the Negative cable that is not making good contact.
Posted on May 15, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Last night I checked the battery and it was still good. I disconnected and then reconn ected both terminals and that brought the power back. When I turned the key the power went out again. I repeated the procedure but did not turn the key. Instead, I took off the knee bolster and tried to wiggle the wires under the dash to see if I could find the source since it seems to be related to the ignition. Nothing cut the power so I started it up and it worked fine except for the check engine light which was flashing that says I have a misfire condition. I drove the car 25 miles to work this morning and will be taking it to the dealer for a better inspection.
Posted on Aug 22, 2008
Check your battery cables for tightness, especially your ground cable. Now you have a new battery, so you have eliminated that as the source of the problem. Turn on your headlights, do they go out or very dim when attempting to start the car? If so, you have a poor electrical connection somewhere - loose cable, bad cable, possibly bad ignition switch.
Posted on Dec 26, 2008
sounds to me that you have an igniton problem not a starter problem and or if you have or had an alarm system could be cause if u do give me feedback and i will explain but seems that your starter is fine from what u say but if you think in terms of the elemts to start a vehicle batery gives pwoer to ignition which sends to starter which gives spark etc i would check you ignition system something is causeing a short and not alowing starter to function
Posted on Feb 10, 2009
SOURCE: 2001 Chevy Impala won't start
If the battery has gone dead, it could cause the security system to go into full lock-up mode. If it has locked up the accessories will work after the battery is charged back up , but the power to the starter will be cut off and it wont turn over. You need to do the 30 minute learn procedure. A GM dealer will print it out for you and you can do it yourself. It's very simple if you follow the procedure exact. hope this helps and good luck.
Posted on Mar 25, 2009
Tips for a great answer:
Nov 01, 2015 | Cars & Trucks
Jul 28, 2015 | 2004 Mitsubishi Endeavor
Mar 03, 2015 | 2005 Mitsubishi Endeavor
Mar 11, 2017 | Mitsubishi Cars & Trucks
Nov 24, 2013 | 2004 Mitsubishi Endeavor
Oct 16, 2011 | 2004 Mitsubishi Endeavor
Jun 27, 2011 | 2004 Mitsubishi Endeavor
Mar 20, 2011 | 2004 Mitsubishi Endeavor
89 people viewed this question
Usually answered in minutes!