Question about 1993 GMC Sonoma Club
I have a 1993 it cuts out when you go to accelerate but it wont idle if I try to move the truck I have to feather the pedal I have changed the fuel pump fuel filter IAC and still hasnt fixed the problem. It's got me puzzled if anyone has any ideas please let me know.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: truck won't start
I found what was wrong with it, Checked everything but the distributor cap and rottor they were all worn out, changed them for new ones and the problem was solved, regarless Thank you so much
for trying in helping me with my problem I' ll try to do the same if I'm required thanks again.
Posted on Nov 02, 2008
SOURCE: My 99 GMC sonoma wont start..
ok... there are a couple of things you can do. i must have miss typed on the cap,rotor . in the back of the motor where the plug wires conect that is the cap that is bolted to the distributor with two torques bits that i believe are t15 in size. there may lie your problem. the posts inside are made of aluminum and they get coroded and dont alow the proper spark. the other commen problem is the exhaust the catalitic converter becomes pluged up. something you can try is remove one of the oxigen sensors and try to start it up if it runs the cat needs replaced. the o2 sensor is a 7/8 nut to remove it. give it a try
Posted on Jan 25, 2009
This could be a number of things but i think that your problem sounds like a vacuum leak or an EGR problem. Try listening for leaks and try un-plugging the EGR solenoid valve one time.
Posted on Apr 17, 2009
had this problem on my neighbors 98 chevy truck with the same engine !!
it turnd out too be the fuel pressure regulator,you have too pull the upper intake too replace it!!
Posted on Jun 06, 2009
SOURCE: my 1993 GMC Sierra Z71
Hi, that's possible but first check the ECM fuse and use a test light to check for power to the injectors on the red and white wires. The computer uses a number of sensor inputs to calculate the injector signals required. If these signals are not available, the computer cannot send the appropriate injection metering signal and will usually set the engine light. Is the engine light on?
Posted on Mar 27, 2011
Tips for a great answer:
Apr 14, 2014 | 1993 Ford Ranger SuperCab
Jan 07, 2014 | 1993 Ford Festiva
Feb 24, 2013 | 1993 Suzuki Swift
Feb 18, 2013 | 1993 Nissan Pickup
Feb 28, 2009 | 1993 Chevrolet Lumina
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: