Question about 2009 Acura RDX
Replaced drivers master window switch and left rear window switch . Now whenever you cut vehicle off then back on the rear window goes down by itself
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I belive you are right in saying it is just the direction switch because i have never heard of both mirrors going out just like each other and at the exact same time. you do not need to go to a dealer to get the switch but you can go to any parts store and get it and this will save you about 25-50% off the acura dealers price
Posted on Apr 21, 2009
It may reinizialze its self once you take battery out and put new one in. The computer modulator resets when you take neg. side of battery off. So that should work. If not try asking at Advance Auto or one Auto parts stores.
Posted on Jun 05, 2009
It sounds like your motor is dying. It take no effort for the motor to allow the window to fall down with gravity, but a lot harder to lift the window back up....
on the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.
Posted on Sep 14, 2009
most new acuras have what you call an anti pinch sensors which means when there is an extra load on the power window motor, it is picked up by a controll module and makes the window go back down ie, you get your fingers cought between the window and the door frame. sometimes this happnes by its self because either the window is off track and not going up stright thus putting extra load on the motor. or, the window runner track its self (which is mostly rubber) is mislodged. causing the window not to fully rest in the full up position.
Posted on Jan 07, 2010
Tips for a great answer:
Mar 30, 2015 | 2014 Acura RDX
Aug 01, 2014 | 2014 Acura RDX
Jul 02, 2014 | 2007 Lexus GS300
Dec 10, 2012 | 2000 Mercury Sable
Jul 27, 2017 | 2007 Buick LaCrosse CXS
Jan 11, 2011 | 2004 Lexus RX 330
Oct 14, 2010 | 2000 Chevrolet Blazer
Sep 10, 2010 | 2001 Dodge Dakota
Sep 27, 2009 | 1999 Dodge Durango
Jan 19, 2009 | 1996 Ford Taurus
42 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: