Question about 1997 Ford Ranger SuperCab

Open Question

2009 santa fe oil pan torque specs? - 1997 Ford Ranger SuperCab

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

moparownr
  • 667 Answers

SOURCE: Need torque specs for oil pan bolts

torque specs for these bolts can be found in a Haynes or Chilton manual availiable from your local parts store, or maybe at your local library, however these bolts are usually no more than 14 ft pounds, unlike cylinder head bolts, the bolts do not need to have any stretch factor to hold the oil pan gasket in place or sealed.

Posted on May 22, 2009

  • 80 Answers

SOURCE: what is the torque spec. for the oil pan, on a

18 Ft. Ib torque Spec

let me know

Posted on Sep 27, 2009

Testimonial: "thanks a million you were very helpful, I appreciate it. Russ"

mrdevildog
  • 37 Answers

SOURCE: what are the torque specs on a 99 ford taurus oil

89 to 123 in-lbs(inch pounds)

Posted on Feb 23, 2010

  • 1206 Answers

SOURCE: replacing a oil pan gasket on a 2000 ford focus

its a simple job no exact torque is needed as the bolts you are tightening will only require a ten millimeter socket to do it equivalent to a 1/4 inch bolt just snug them and top it all of with a half turn beyond that.simple job really .

Posted on Oct 29, 2010

  • 80 Answers

SOURCE: I need to know the

pan bolts torque is
15Nm or 11 lb-ft

specs taken from a dealer manual

Have a nice day
Jay

Posted on Jun 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

98 jeep wrangler tj 4.0 oil pan bolt pattern or layout. An torch specs


Bobby, oil pan bolt torques for 4.0 Wrangler. Oil Pan Bolts 1/4 84 in-lbs Oil Pan Bolts 5/16 132 in-lbs As far as sequence, see last link, start in center, criss cross pattern tighten snug all, then repeat to torque spec.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Oil Pan Gasket leaking
http://jeephorizons.com/tech/99_40l_torque_specs.html
98 jeep 4 0 oil pan bolt torque sequence specs Google Search

May 21, 2016 | Jeep Cars & Trucks

1 Answer

Torque specs on 2004 Hyundai a Santa Fe 3.5 GLS differential cover plate bolts


1 MIN IS CUTTING IT CLOSE BUT YOU SHOULD BE ABLE TO MAKE IT. TORQUE SPECS SHOULD BE 14 TO 15 FOOT LBS.

Aug 18, 2014 | 2004 Hyundai Santa Fe

2 Answers

What size socket/wrench is used to remove oil pan plug from 2002 Hyundai Santa Fe V-6?


My 2005 Hyundai Santa Fe is a 17mm. I also made a video showing how to change the oil.

Jan 15, 2012 | 2002 Hyundai Santa Fe

1 Answer

Hi. I'm trying to find a diagram of the 2002 Hyundai Santa Fe as I'm trying to find out where the transmission filter is/goes.


I believe in most cars you have to drop the tranny pan to get to the filter. It is not hard to do but it can make a mess if your not ready for it. Make sure to get a replacement gasket when you get your filter and most auto part stores will have a diagram for you. The bolts on the pan will require to be torqued to a spec most stores can help you with that. Good luck.

Jun 25, 2010 | 2002 Hyundai Santa Fe

1 Answer

Conversion kgf.m to foot pounds.


1 kilogram meter = 7.233 013 831 6 pound foot

you can use a online converter like the http://www.onlineconversion.com/torque.htm

3.5 kilogram meter = 25.315 548 411 pound foot
4.5 kilogram meter = 32.548 562 242 pound foot

Jan 28, 2010 | 2006 Hyundai Santa Fe

1 Answer

I have a 2007 Santa Fe 2.7 liter automatic . is the transmission fluid change just a drain and fill?


First, have you reached the limit of milleage recommended by Hyundai maintenance schedule?
If not, do you have any indication that your tranny oil is bad: color, odour...?
If not wait until the maintenance is due.

To answer your question, my guess is that you don't have a draining plug meaning that the tranny oil pan has to be unbolted and removed (very dirty job if you're not on a lift or don't have an appropriate oil recuperation setup) Internal filter have to be replaced by the same time.
Correct pan sealing and torquing is mandatory to avoid leak.
Follow Hyundai recommendations about oil type to be used.
Hope it will help
Dan

Dec 28, 2009 | 2007 Hyundai Santa Fe Limited

1 Answer

Need helpful suggestions on changing the oil on 01 santa fe


i do my own oil since ive had my 02 santa fe.first remove the black plastic shield under the car.its best to use the perfect size rench to break the oil pan bolt lose. it takes 4.5 quarts for the four cylinder and the v6 3.5L 4.7quarts for 2.7Lv6

Aug 10, 2009 | 2001 Hyundai Santa Fe

2 Answers

HOW TO CHANGE OIL ON A 2002 HYUNDAI SANTA FE. IM 19 YRS OLD AND WOULD LIKE TO HELP MY GIRLFRIEND AND CHANGE IT FOR HER. A DETAILED DRAWING POINTING OUT THE OIL CAP AND THE DRAINAGE AND FILTER FROM...


Lift your Hyundai Santa Fe using a jack and then place the car on jack stands. If you don't have jack stands, drive the car onto a set of wheel ramps.
Pop the hood and remove the dipstick and oil filler cap. The dipstick is near the front engine compartment with the oil filler nearby.
Gather an oil drip pan, a 17-mm wrench, oil filter wrench, cleaning cloths and a new oil filter. Slide under your Santa Fe.

Change the Oil
  • Locate the oil filter and oil drain plug underneath the car. The drain plug is on the bottom of the oil pan, and the filter is to the side of the oil pan.
  • Remove the oil drain plug using the 17mm wrench. Pull the plug out quickly and let the oil drain for 10 to 15 minutes. Check the gaskets and threads for damage. Replace these components, if necessary.
  • Take off the oil filter using an oil filter wrench. Dump the old oil into the oil drip pan and put on the new oil filter. Tighten the oil filter by hand, and then replace the oil drain plug using the wrench. Clean off the excess oil.
  • Go under the hood and add oil. Turn on the engine and check the oil pressure gauge to make sure it rises. Let your Santa Fe run for a minute.
  • Lower your Hyundai Santa Fe and turn off the engine. Take an oil reading on the dipstick. If the oil level isn't at full, add a bit more oil.
Thanks
Kinldy rate the answer
Smith

Jul 08, 2009 | 2002 Hyundai Santa Fe

Not finding what you are looking for?
1997 Ford Ranger SuperCab Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...