Question about Cars & Trucks

1 Answer

All 4 of my electric windows in the 2000 kia sportage go out at once I have changed all the fuses

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,679 Answers

Is there a front /rear control switch , if fuses ok then check power to and from the switch(s) keep me posted if you wish

Posted on May 15, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

rockitman187
  • 2559 Answers

SOURCE: 2000 kia sportage ex, 4 cyl.

Yes there is a sensor that controls Fuel/air ratio.It's called a MAF (mass air flow sensor)
But I think you should have the EGR (Exhaust gas recirculation)valve checked
and The TPS (throttle position sensor)maybe dirty.

Although may things can cause this issue,I would look at the items above first.


Please rate this a blue fixya

Posted on Feb 14, 2009

michigan man
  • 3533 Answers

SOURCE: KIA Sportage 2000

it should be in the back on either side behind a little door

Posted on Mar 21, 2009

Molson02536
  • 3854 Answers

SOURCE: code for kia sportage tape and cd player

You can go to the dealer and have them help you get the code for the radio, if there going to charge you a crazy amount you can try www.radio-code.com. There cost is cheaper and can help you reprogram the code in your KIA. befor you go through all that, check for the code in the glove box, there might be a sticker in there or in your back pages to your manuel.
Good luck and hope this helps yougte your radio wokring again, keep me posted oh and try 0000 first. 

Posted on Jun 07, 2009

  • 15 Answers

SOURCE: My 2000 Kia Sportage a/c and power windows stopped

as far as the windows it could be the window regulators or the motor in the window switch

Posted on Aug 18, 2009

c17hydro
  • 2984 Answers

SOURCE: the easiest way to pull the heater core from a kia sportage-2000

There is no real easy way to do it....not like the older cars..

  1. Disconnect the negative battery cable.

    CAUTION After disconnecting the negative battery cable, wait for at least 10 minutes for the air bag module to deplete its stored energy.

    1. Remove the driver’s side air bag and steering wheel by performing the following procedure:
    2. Position the front wheels in the straight-ahead position.
  2. Remove the 4 steering wheel-to-air bag module bolts.
  3. Carefully, lift the air bag module and disconnect the electrical connector.

    CAUTION Place the air bag module in a safe location with the front facing upward.

  4. Remove the steering wheel-to-steering column nut.

    NOTE If may be necessary to mark the steering wheel to steering column alignment.

  5. Using a steering wheel puller, press the steering wheel from the steering column.
  6. Drain the cooling system into a clean container for reuse.
  7. Discharge and recover the air conditioning system refrigerant.
    1. Remove the instrument panel by performing the following procedure:
    2. Remove both the rear and front consoles.
    3. Remove the knee bolster assembly.
    4. Remove the “T” bar section.
    5. Remove the relay bracket.
    6. Remove the turn signal assembly and the upper/lower steering column covers.
    7. Remove the hood release handle lockscrew, the hood release handle and the cable assembly nut.
    8. Remove the left side front pillar trim and the lower left side cover.
    9. Remove the 2 left side of the “T” bar-to-chassis bolts.
    10. At the left side of the instrument panel, remove the 3 instrument panel-to-chassis bolts.
    11. Remove the ashtray.
    12. Remove the center panel trim.
    13. Remove the ventilation control panel.
    14. At the center of the windshield next to the windshield, remove the cap and the mounting bolt.
    15. " Remove the right side front pillar trim and the lower right side cover.
    16. Remove the 2 right side of the “T” bar-to-chassis bolts.
    17. At the right side of the instrument panel, remove the 3 instrument panel-to-chassis bolts.
    18. Remove the steering column-to-instrument panel bolts and lower the steering column.
    19. Disconnect the instrument panel electrical connectors.
    20. Remove the instrument panel.
    1. Remove the blower/evaporator housing by performing the following procedure:
    2. Disconnect the air conditioning refrigerant lines from the evaporator core and discard the gaskets. Plug the openings to prevent contamination.
  8. Disconnect the fresh air control cable from the blower/evaporator housing inlet duct.
  9. Disconnect the 5 connectors from the bottom of the blower/evaporator housing.
  10. Move the carpeting from the bulkhead to gain access to the hole cover plate.
  11. Remove the 4 hole cover plate nuts and the plate.
  12. Remove the 2 upper blower/evaporator housing bolts.
  13. Remove the 2 lower blower/evaporator housing-to-bulkhead nuts.
  14. Remove the blower/evaporator housing.
  15. Disconnect the heater hoses from the heater core.
  16. Remove the temperature control cable from the heater housing.
  17. Remove the 2 lower heater housing nuts and the upper heater housing-to-bulkhead nut.
  18. Remove the heater housing.
    1. Disassemble the heater housing by performing the following procedure:
    2. Remove the seal from the heater core tube connections.
    • Remove the vent seal.
    • Remove the 2 wiring harness-to-heater servo screws.
    • Remove the 8 heater housing clips located on the servo side (left side).
    • Remove the left side of the heater housing.
    • Remove the 6 heater housing assembly clips.
    • Remove the 4 heater core tube mounting bracket screws and the bracket.
    • Remove the 8 remaining heater housing clips and disassemble the housings.
    • Remove the heater core from the housing.

  • f277857.gif
    Exploded view of the heater core and heater housing assembly—Kia Sportage


    THIS IS JUST TO REMOVE IT!

    Posted on Oct 18, 2009

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Where to find fuse for relation of the reverse parking sensors in kia sedona ls 07plate


    kia sportage parking sensor - ABMforum.com

    abmforum.com/kia-sportage-parking-sensor.html
    kia sportage parking sensor installing rear parking sensors fitting rear parking sensor strip ... the pre-drill hole on 07 sportage 2007 kia sportage lx navigation wiringparking sensors. ... I cannot see any fuse which may relate to them. ... with their rear parking sensors Even if all is clear behind I now get a continuous beep and ...

    Urgent help needed - towbar electrics - Kia Forum

    www.kia-forums.com/kia.../71610-urgent-help-needed-towbar-electrics....

    Aug 28, 2011 - 10 posts - ‎3 authors
    I'm in the middle of fitting a genuine Kia towbar (made by Witter) to my SW. ... Need help again - Does anyone know the location of the PDC Control unit (parking sensors)? ... Drives: Kia Ceed SW 1.6 MT LX A8 ... with the loom which connects to the fuse box does not seem to attach to the rear lighting loom.

    [PDF]2007 Sedona Owner's Manual - Kia Canada


    Jan 30, 2016 | Kia Cars & Trucks

    1 Answer

    2000 kia sportage the meter fuse intermittingly breaks ,cant figure it out


    My experience with a kia sportage is that the big fuses are simply inserted to the fuse box located in front of the battery at the engine bay. The plastic holders gets brittle over a span of time and due to the heat inside the engine bay. Most often the fuse loosens up and causes fuse blow out. I had 4 successive fuse blows in 2 months time that i decided to change the whole fuse holder with a new one. It Worked

    Oct 02, 2014 | 2000 Kia Sportage

    1 Answer

    2000 KIA


    Check the ground connections. My 2001 Sportage had same problem during the dry summer started working when it rained found a loose ground that only made contact when wet.

    Jan 07, 2013 | 2000 Kia Sportage

    1 Answer

    Back window wont roll up service manual 2000 kia sportage manual


    You'll need to lower the rear door and take the inside trim off using a small screw driver to pry off the clips around the side. Once inside the door you'll probably find that the window slipped out of the track and needs to be popped back in. Could be a two person job.

    Sep 21, 2010 | 2000 Kia Sportage

    1 Answer

    Passenger window on drivers side will not go up


    hi normally the fuses for the windows are grouped or 1 or 2 front and back. please check fuses, do's the window struggle to go down / up if so then this is a fuse, wondow motor may be faulty, electrical feed to this circuit may be broken. gerry

    Sep 08, 2010 | 2000 Kia Sportage

    1 Answer

    I have a 2000 kia sportage takes long to start idles fine onces is started then once in drive it feels out of timing


    Get your sparkplug and sparkplug wires checked, if not ten u yay have to get your fuel filter changed and check the rest of ur injection system.

    Aug 06, 2009 | 1999 Kia Sportage

    1 Answer

    2000 kia sportage pump is working relays have been


    there is a splice for fuel injectors at the front of the fuel rail conduit and electric tape will need to be removed to see if it is ok then clean up all engine grounds and ecm grounds on passenger side kick panel if this doesnt help check coils and crank sensor

    Jul 22, 2009 | Kia Sportage Cars & Trucks

    1 Answer

    I have my 2002 kia sportage 4x4 windows do not work


    Check your fuses in the engine bay as you may have shorted them out when you washed the engine.

    Jun 19, 2009 | 2002 Kia Sportage

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    54 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75005 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...