Question about 1994 Buick LeSabre

1 Answer

When i get into the car put the key in the ignition to crank the car i get all my dash lights as usual but the car does not turn over i have replaced the starter, and battery, i have also purchased another pass key and it still wont start

Posted by on

  • messstat
    messstat May 11, 2010

    Your BCM is bad...Or something simpler...Do you have the old PATS (not PASS) ignition key?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

Replace the ignition lock cylinder.

Posted on Jun 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When put fob, no cluster lights, no crank, no start!


That key reset it's code like every 60 secs... do you have other keys around it that are also for that car... if so they might both be changing codes at the same time.

Sep 03, 2015 | Cars & Trucks

1 Answer

Have 05 1500 Avalanche 4x4 with 5.3L having problem with ignition(?). Started out that when I started it the heater fan would not come on, dash lights not go off and could not put in 4 wheel drive with...


I think you were on the right track with the key lock and ignition switch. It sounds like the lock is not turning the switch far enough.
There are gears between the lock cylinder and switch that may not be aligned up right.
The anti-theft system would prevent the engine from cranking, but the security light should be flashing if the system thinks the truck is being stolen.

Feb 03, 2014 | Buick LeSabre Cars & Trucks

1 Answer

2003 yukon will not turn over.When I turn the key all the dash lights come on. It started doing this about 6 months ago. It would usually start after 2 or 3 tries or if i put in nuetral and let roll a few...


Could be a problem with the anti-theft system, the neutral safety switch, the key switch, or the actual starter.
Will it crank in neutral instead of park ? Do you have power at the starter posts when the key is in the start position ?
Is the security light blinking ?

Jan 29, 2014 | 2003 GMC Yukon XL

1 Answer

99 Regal GS 3800 supercharged wont crank key in ignition all lights go off and car does nothing help!!!


Sounds like you may have possibly TWO problems here. The ignition key not turning past the run position or even to the run position is most likely a lock cylinder issue and may be fixed by replacing the ignition lock cylinder, As for the power being killed when turning the ignition to the start position, that sounds like a defective ignition switch. these items are two seperate parts. The reason for the turn signal issue may be related to the ignition switch fault.
Hope this helps.

Nov 16, 2013 | Cars & Trucks

2 Answers

I got a 1999 chevrolet tahoe. when i put the key in the ignition the head lights,and the dash light comes on but it won't even turn. i change the starter and got a new battery and it still won'


well if you have a dvom/voltmeter check the power at the starter terminals. the main terminal should have power all the time the key wire should have power only when the key is turned to crank engine. if you have power at both then i would start looking at grounds

Mar 30, 2012 | 1999 Chevrolet Tahoe

1 Answer

Securyty ligth car dont star


ANY TIME SECURITY LIGHT COME ON YOU HAVE FAULT IN THE IGNITION KEY OR KEYS THEY COULD BE WORN OUT WHERE TO A POINT WHERE THE BCM AND PCM DONT RECOGNIZE THE CAR KEYS CAUSING NO START CONDITIONS.ALSO WORN KEY SWITCH AND BCM WILL CAUSE NO START CONDITIONS.TRY THESE TWO THINGS TRY ANOTHER CAR KEY IF STILL DONT CRANK.PUT KEY IN IGNITION TURN KEY TO ON POSITION WITH ENGINE OFF LEAVE KEY ON POSITION IN IGNITION FOR 10 MINUTES WATCH DASH SECURITY LIGHT WHEN IT TURNS OFF IN 10 MINUTES.TURN OFF IGNITION FOR 5 SECONDS THEN TRY STARTING CAR IF CRANKS OR DONT STILL THE PROBLEM IS IN THE THEFT SECURITY SYSTEM NEED TO GET DEALERSHIP TO FIX THEY HAVE DIAGNOSTIC EQUIPMENT TO FIX AND REPROGRAM THEFT SECURITY. SYSTEM.

May 25, 2010 | 1999 Oldsmobile Alero

1 Answer

Pass key light on and car wont start


If when you turn the ignition the car lights(in the dash) come on but the car does not crank. the ignition lock cylinder needs to be replaced.

May 15, 2010 | 1995 Buick Roadmaster

1 Answer

I need directions to remove the dash mounted ignition lock cylinder so i can replace it first time doing dash monted ignition lock and does it have to be programed


THE HAYNES REPAIR MANUAL IS WHAT YOU NEED.IT WILL SHOW AND TELL YOU HOW TO REMOVE THE IGNITION LOCK CYLINDER.YOU NEED A SCANNER TO REPROGRAM ANTI THEFT SYSTEM SO IT CAN RECOGNIZE THE KEY.YOU CAN TRY THIS.THIS IS A SECOND OPTION IF YOU DONT HAVE SCANNER.PUT KEY IN IGNITION.TURN TO RUN POSITION FOR 10 MINUTES.WITH ENGINE OFF.YOU WILL WATCHING THE SECURITY LIGHT ON DASH.IT SHOULD TURN OFF IN TEN MINUTES.IF IT DOES TURN OFF.THEN YOU TURN OFF IGNITION FOR 5 SECONDS.AND TRY STARTING CAR.IF YOU TRY THIS PROCEDURE TWICE AND CAR DONT CRANK.THE DEALERSHIP HAS TO REPROGRAM IT FOR YOU.

Jan 18, 2010 | 1999 Oldsmobile Alero

2 Answers

1985 190e Engine turns over, won't start


when the car ignition is turn on all accessory lights should lite up telling the computer everything is in good contact. If none of the dash lights is not lighting up you don't have a good ignition contact and computer is not getting any power. your stater will crank and turn the engine over only but the fuel pump and ignition module and other accessary is not turn on, the car will not start. What turn everything on is your computer, computer; control all items like fuel pump, sparks etc. You have to get all dash light working again in order for computer to turn on. Check all the fuses and relay under the hood, next your ignition switch in your steering wheel may be faulty allowing only starter to work and not others. this unit wear out and common problems to all cars, parts is 35 buck to replace and you going to have to take the steering columns apart to get to it. Not easy but it will take time. Get all the dash light working and you will be back in the game. good luck and hope that help some

Aug 06, 2009 | 1985 Mercedes-Benz 190

2 Answers

Dash lights are not working 1999 Mercedes-Benz CLK


most probable cause could be a faulty ignition switch. Does the lights on the dash come on when you turn the key to the on position ? Do they turn off when you turn the car to the start and are about to crank the engine ? If that does not happen you will have to replace the Ignition switch. They don't have a fuse for the dash lights.

Dec 03, 2008 | 1999 Mercedes-Benz CLK

Not finding what you are looking for?
1994 Buick LeSabre Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...