Question about 2001 Ford Taurus

Open Question

How do i fix 2001 ford taurus codes po172 / po175

Bank 1 bank 2 to fuel to rich

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
Pops65Pony
  • 137 Answers

SOURCE: 2002 6 cylinder 3.o engine Ford Ranger. Cold start

Changed the air filter lately? Possibly defective O2 sensors, but I doubt it. If air filter and intake are clear, I'd check barometric pressure sensor and mass air flow sensors. Get a Haynes or Chilton's for $25 at Pep Boys for instructions on testing these componenets

Posted on Oct 14, 2009

Ad
  • 46 Answers

SOURCE: codes po172 and po175 too rich mixture

easy one.. when ever you have codes and want to know what they are..visit.. www.bestdirectorysolutions.com on the home page.. left side, scroll down and click on trouble codes... good luck sir

Posted on Mar 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine light on


P0171 ; Fuel Trim System Lean (Bank 1)
P0174; Fuel Trim too Lean (Bank 2)
fuel trim is system to modify injector pulse if system go lean it will go rich when the system is too much lean and is max.rich it code
look for 02 sensor bank 1 and 2 data
hope it helps

Mar 31, 2014 | 2003 Chevrolet Malibu

1 Answer

System lean bank 1 p0172 fuel


PO 171 Bank 1 too lean
PO 174 Bank 2 too lean
Why ?
The front O2 Sensors need to be replaced at
100,000 miles or sooner, if they have actually failed
They are reading too lean because the system is too
rich & the computer is driving the fuel trim or injector
pulse lean, thus the codes or failed sensors, yes both
Have to check fuel trim with a scan tool
Have to check fuel pressure
Have to check there are no leaking injectors
Have to check for Vacuum Leaks from the intake
all the way to the exhaust converter
Your working a rich condition keeping in mind the system
is driven lean
You look at fuel trim short & long,sort of a past history
of events
May want to look at converter temps also
The converters won't last long if you have or has
a rich condition from fuel or cylinder misfires
Now the spark plugs can't be over 3 years old
& no mifires,get that out of the way before working
the O2 issues

Jul 27, 2013 | 2005 Mitsubishi Endeavor

1 Answer

1994 Blazer 4.3 keeps stalling out running rich smells like gas


Leaking fuel pressure regulator , or leaking injector's ,depends on injection system . ! it's only running rich on right bank. whatever that means . Your vehicle is a v - 6 has two banks . right side of the engine an left side of the engine . Bank 1 is where #1 spark plug is . bank 1 is odd numbers 1-3-5 Bank 2 is even firing #'s 2-4-6 . What fuel injection system does it have ?
Your best bet mite be to take your vehicle to a qualified repair shop.

Oct 05, 2017 | 1994 Chevrolet S-10 Blazer

1 Answer

I need to know which O2 sensors are which: Bank 1 Sensor 1, Bank 1 Sensor 2, Bank 2 Sensor 1, and Bank 2 Sensor 2. Which are on the engine block and which are on the exhaust?


bank one upstream oxygen sensor on exhaust manifold bank two oxygen sensor after catalytic converter.tell me what code you are getting.bank 1 sensor 1 fuel system is too rich fuel pressure too high fuel pressure regulator leaking or more than 1 fuel injector leaking. fuel contaminated.check spark plugs if black carbon color fuel system too rich. if you getting code bank 1 sensor 2 check for air leaks in the exhaust system, air leaks intake manifold.look for vacuum lines leaks,look for vacuum leaks pcv valve and hose and make egr valve not stuck open or gasket leak.

Apr 15, 2011 | 2003 Mazda MPV

1 Answer

I have a 1998 ford contour that has codes p1130 and p1131 on it what could be the problem. the check engine light is on


H40 DTCs P1131, P1132, P1151 AND P1152: UPSTREAM HO2S NOT SWITCHING. DTC P1130: FUEL SYSTEM NOT SWITCHING AT FUEL TRIM (RICH OR LEAN)
    Diagnostic Trouble Codes (DTCs) P1131 bank 1 (Cylinder 1) and P1151 bank 2 indicate the fuel/air ratio is correcting rich for an overly lean condition. The HO2S voltage is less than 0.45 volt. DTCs P1132 bank 1 (Cylinder 1) and P1152 bank 2 indicate the fuel/air ratio is correcting lean for an overly rich condition. The HO2S voltage is greater than 0.45 volt.
    DTC P1130 and P1150 indicate the fuel control system has reached maximum compensation for a lean or rich condition and the HO2S is not switching.
    DTC/HO2S Reference List
    • HO2S-11 = DTCs P1131, P1132 and P1130
    • HO2S-21 = DTCs P1151, P1152 and P1150
    Possible causes:
    Fuel system
    • Excessive fuel pressure.
    • Leaking fuel injector(s).
    • Leaking fuel pressure regulator.
    • Low fuel pressure or running out of fuel.
    • Contaminated fuel injector(s)
    • Vapor recovery system
    Induction system
    • Air leaks after the MAF.
    • Vacuum leaks (vacuum lines and gaskets).
    • Restricted air inlet.
    • PCV system.
    • Improperly seated engine oil dipstick.
    EGR System
    • Leaking gasket.
    • Stuck open EGR valve.
    • Leaking diaphragm.
    Base engine
    • Oil overfill.
    • Cam timing.
    • Cylinder compression.
    • Exhaust leaks before or near the HO2Ss.
  • Check intake air system for leaks, obstructions and damage.
  • Check air cleaner element, air cleaner housing for blockage.
  • Verify integrity of the PCV system.
  • Check for vacuum leaks.

Feb 12, 2011 | Ford Contour Cars & Trucks

1 Answer

2006 hundai elantra P2270 code. If this is an O2 sensor, which one?


Possible O2 sensors:

P2270 O2 Sensor Signal Stuck Lean Bank 1 Sensor 2
P2271 O2 Sensor Signal Stuck Rich Bank 1 Sensor 2
P2272 O2 Sensor Signal Stuck Lean Bank 2 Sensor 2
P2273 O2 Sensor Signal Stuck Rich Bank 2 Sensor 2
P2274 O2 Sensor Signal Stuck Lean Bank 1 Sensor 3
P2275 O2 Sensor Signal Stuck Rich Bank 1 Sensor 3
P2276 O2 Sensor Signal Stuck Lean Bank 2 Sensor 3
P2277 O2 Sensor Signal Stuck Rich Bank 2 Sensor 3
P2278 O2 Sensor Signals Swapped Bank 1 Sensor 3 / Bank 2 Sensor 3
---
This is Bank 1 (closer to the dash panel) Sensor 2 (located after the catalytic converter).

---
Note: A malfunctioning front oxygen sensor may cause fuel trim codes to set.
  1. Several Diagnostic Trouble Codes use specific terminology to refer to sensor location. The illustration and key below explain the following terms:
  2. Engine BANK Bank 1 is closer to the dash panel, (also referred to as RH or right hand). Bank 2 is closer to the radiator, (also referred to as LH or left hand).
  3. UP Refers to Sensor 1 or "front sensor". It is located closer to the exhaust manifold and before the catalytic converter.
  4. DOWN Refers to Sensor 2 or "rear sensor." It is located after the catalytic converter.
  5. The following examples show how to interpret oxygen sensor terminology:
  6. B1/S1 = Bank 1/Sensor 1 = Dash panel side, BEFORE the catalyst or "upstream"
  7. B2/S2 = Bank 2/Sensor 2 = Radiator side, AFTER the catalyst or "downstream"

Aug 06, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

Speedometer sudenly stoppped working. now works intermittently. also shows check engine light. It is showing p0171 & p0172 codes. Lean and rich. seams like they contradict each other. occasionaly the...


P0171 indicates a lean condition. The most common cause of this is a defective mass air flow sensor. Also check if any vacuum leaks.Replace MAf sensor,if cleaning the MAF does not help.
OBD II P0172 Fuel System Too Rich (Bank 1).P0172 - System Too Rich (Bank 1) Essentially this DTC means that an oxygen sensor in bank 1 detected a rich condition.
When the code says that the Fuel System is "too rich," it means that the computer has been subtracting more and more fuel, which is called Long Term Fuel Trim. Ideally, the Long Term Fuel Trim should be close to 1 to 2 percent. When a code P0172 is set, it means that the Fuel Trim is anywhere from -15 percent to as low as -30 percent compensated. When this happens, the computer knows that there is an improper condition in the control of the Fuel System.


Thanks.

Feb 07, 2010 | 1996 Volvo 850

3 Answers

Check engine light (emission system service required) Help?!?!


There may be problem with the mass air flow sensor (very common with Volvo). This causes the fuel system to malfunction.

You may have noticed increased fuel consumption, loss of power and general 'lazyness'.

Better to take it to authorized Volvo service for a checkup/fix.

Jan 13, 2010 | 2000 Volvo S80

4 Answers

Check Engine light is on my 1997 F150 with a small V-8. The tester returns codes P0171, P0172, P0174 and P0175. What does all this mean?


those codes are for lean engine condition look for vac leaks at the back of engine to the pcv valve could hear hissing noise with engine running also check egr valve to be stuck open also when was last fuel filter changed? hope this helps .

Sep 16, 2009 | 1997 Ford F150 Regular Cab

1 Answer

20 mpg down to 11 mpg !


Replace your bank 1 (that's the cylinder bank with cylinder #1 in it, usually passenger side but verify this before changing parts) primary oxygen sensor. This is the one before the catalytic converter. The primary determines your air/fuel mixture, and if it goes bad, the computer will revert to preprogrammed fueling maps, which are fuel-rich by design (to safeguard the engine). Change the O2 sensor on bank one, before the cat, and maybe check your spark plugs as well (running rich too long will foul them) - for the minimal cost, it's worth changing them too.

Aug 29, 2008 | 1996 Plymouth Grand Voyager

Not finding what you are looking for?
2001 Ford Taurus Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

78919 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5675 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...