Question about 1999 Ford Contour

Open Question

What is torque cam shaft bolts 1999 ford contour twin cam 2.0?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: how to time up a 1999 ford contour

how to change a timing belt

Posted on Jul 06, 2008

Ad
polarcycle
  • 1392 Answers

SOURCE: head bolt torque spec

Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.

Posted on Aug 16, 2009

  • 5 Answers

SOURCE: WIRING DIAGRAM A/C SYSTEM ON A 1999 FORD CONTOUR,2.0L ENGINE

Haynes Manuals not Chiltons are the source I use for wiring. You local library might have one and photocopy it off.

Posted on Sep 16, 2009

c17hydro
  • 2984 Answers

SOURCE: torque spec 96 ford contour 2.0 liter dohc head bolts

Please don't forget to rate!

1st step 15-22 ft.lbs.
2nd step 30-37 ft. lbs.
3rd step Tighten the bolts an additional 90-120 degrees

Do you need the tightening sequence?

Posted on Oct 18, 2009

tburtk
  • 158 Answers

SOURCE: torque on 3.0 ford taurus head bolts

40 ftlbs then 73 ftlbs then recheck at 73 ftlbs

Posted on Feb 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need torque spec. For camshaft pulley bolt on 2004 dodge stratus


2004 dodge stratus 2.7 L v6 200i--2006 engine identification is EER has twin cam shafts and the bolts that hold the sprockets to the cam shaft are at 21 ft/lbs
there are 4 bolts for each cam (autodata publication page 375)
if this is not your engine then comment as to how many cam shafts it has as there are many different settings for different dodge engines

Oct 26, 2015 | Dodge Cars & Trucks

1 Answer

Toyota 80 series GLX auto landcruiser 1996 need head bolt torque a nd cam shaft torque settings


Torque setting Toyota Land-cruiser 80 Series 4.5 1995-98
Engine code: 1FZ-FE, 1HD.
Stage 1: 20 Nm (Start tightening bolts from center to outwards)
Stage 2: 39 Nm
Stage 3: Rotate each bolt by 90 Degrees.
Stage 4: Further rotate each bolt by 90 Degrees

Nov 22, 2014 | 1996 Toyota Land Cruiser

1 Answer

1999 ford contour shutters at 60 mph


Check tire balance, outer tie rod ends, inner tie rod ends, ball joints, CV joint bolt torque at hub, and control arm bushings. You will find your problem some where in this line up. GOOD LUCK FRIEND.

Nov 17, 2014 | 1999 Ford Contour

2 Answers

Do I need to torque the cam shafts


If you are asking about the cam shaft bearing caps, the answer is a most definite YES! I can't remember the exact measurement but believe it should be 12nm.. When bolting down the shafts, hand tighten each cap, pulling the shafts down evenly and then when all caps are fully closed use a torque wrench to complete the job. Regards John

Mar 31, 2012 | 1999 BMW 318 ti

2 Answers

Timing belt marks 1997 ford contour 2.0 eng.


Ford Contour / Mystique / Cougar 1995-1999 Repair Guide

c398e23.jpg


More details in Autozone.com.

Good luck (rated this)

Sep 02, 2009 | 1997 Ford Contour

2 Answers

Hyundai elantra 1.6GLS J2 torque settings


dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm

Aug 31, 2009 | 1995 Hyundai Elantra

2 Answers

I nead torque wrench setting for head bolts and cam bolts


Head bolts- 62 lb-ft cam pulley lock bolt- 42 lb-ft cam cap bolt- 16 lb-ft

Feb 02, 2009 | 1999 Kia Sportage

1 Answer

SET TIMING ON 2.4 TWIN CAM 1999 MALIBU


bring the piston no 1 on the top position check the cam shaft si moving freelyon the outer side of the shaft there are 2 gear with 14mm bolts and 1 extra whole, put a long bolt in the empty space and try to turnthe engine the bolt will go further in the space than the timming is set put the chain on that should do

Dec 08, 2008 | 1999 Chevrolet Malibu

1 Answer

My 1999 Ford Contour has a variable valve timing/camshaft which I don't know how to properly time. Also how do you remove the cam belt sprocket so that the head can be removed. It looks like it is held...


the crank notch should be up and the two square lobes have to be pointing up square with engine i used welders vise grips yes the cam bolts are torx

Aug 22, 2008 | 1999 Ford Contour

Not finding what you are looking for?
1999 Ford Contour Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...