Question about 2001 Pontiac Sunfire
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Torque on the oil pan bolts is 18 lb/ft. Tighten in a criss cross pattern slowly tightening the bolts down making multiple passes until you have them torqued.
Posted on Jul 15, 2010
Cylinder head bolt torque spec are
First Tightening Pass --- 22 Ft. Lbs or 30 N.m
Second Tightening Pass --- 155 Degrees
Here is the tightening sequeuce just in cause
Posted on Dec 23, 2010
Install cylinder head bolts finger-tight. New cylinder head bolts are recommended due to stretch of the old bolts.
Tighten bolts in sequence, tighten the long bolts to 46 ft. lbs. (63 Nm) plue 90 degrees. Tighten the short bolts to 43 ft. lbs. (58 Nm)
Install pushrode and rocker arms and rocker arm nuts. Tighten nuts to 22 ft. lbs. (30 Nm).
Install valve cover and tighten bolts to 89 inch lbs. (10 Nm).
Posted on Apr 05, 2011
Tips for a great answer:
Jul 20, 2016 | 1999 Nissan Frontier
Apr 08, 2015 | Cars & Trucks
Nov 24, 2013 | Cars & Trucks
Nov 20, 2011 | 2001 Pontiac Sunfire
Dec 23, 2010 | 2002 Pontiac Sunfire
Nov 03, 2010 | 1998 Toyota Corolla
Jul 15, 2010 | 1999 Pontiac Sunfire
Dec 21, 2009 | 1999 Pontiac Sunfire
98 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: