Question about 1998 Volvo S70

Open Question

CODES po733 po734 - 1998 Volvo S70

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 Jeep Liberty codes po733 and po734 jeep acts up


Really

You got the OBD Codes

You don't know it has a transmission problem
& is going into failsafe?

Oct 14, 2014 | 2003 Jeep Liberty

1 Answer

I have a 1997 audi a6 Quattro awd and I'm getting


these are sensors in the box. TR sensor/switch--shift solenoids---transmission mechanical fault.
Check all wires and connections. replace the TR sensor /switch for both gears

Sep 06, 2014 | Cars & Trucks

1 Answer

Hoe to fix Chrysler 300M: 99 30m Chrysler have the codes po700,po734,po733,po122,po113,po108


codes PO700, PO733, PO734 are all transmission codes all have to do with inproper outputshaft speed could be a bad outut shaft sensor but most likely the transmission is slipping, and that is not good if the transmission is shipping you will need to replace it, but try chaning the fluid and filter and and see if that does not take care of the problem.

code PO122 is the TPS sensor, code PO108 is the MAP sensor the MAP sensor can set the TPS code but the TPS can not set the MAP code so i would start with the MAP sensor ..... code PO113 is the intake air temp. sensor check the wiring on the top of the engine to make suer there is not a bad spot in the harness if all looks good then replace the sensor, but the way all 3 sensors use a commoin ground circuit so check the wiring before you replace any of the sensors......good luck

Nov 23, 2011 | 1999 Chrysler 300M

1 Answer

Chrysler 300M: 99 30m Chrysler have the codes po700,po734,po733,po122,po113,po108


108 Map sensor or pcm computer,113 IAT sensor or pcm,122 TP sensor or pcm, 700 Automatic trans computer or pcm, 733 Automatic trans leak or low pressure, 733 leak low pressure Your main computer(pcm) is shot start there. Then possible trans computer shot also(TCM)

Nov 23, 2011 | 1999 Chrysler 300M

1 Answer

My 2000 Saturn sl1 recently showed codes po733 and po734.What exactly does this imply and where would I start if I wanted to try fixing the problem myself?


po733- gear 3 ratio incorrect, po734- gear 4 ratio incorrect. this is how to fix. You can try replacing the shift solenoids inside the transmission as long as the trans fluid is nice and clean looking. If the trans fluid is dark or burnt looking, it time for a new tranny if you need further assistance please let me know and i will be glad to assist you. Thanks, Midwest-Tek

Aug 28, 2010 | 2000 Saturn SL

1 Answer

I have a transmission code PO732, PO734, and PO733 on my 2002 Dodge Durango. What do these codes mean?


Those three codes point to shift solenoid and/or clutch problems according to the Dodge Service Manual

Find someone with a Chrysler scanner and monitor the trans speed sensors, preferably the input one, make sure there is a rpm readings on both when you drive the vehicle, if ok, do a 2nd gear clutch test, if failed, internal clutch failure, if ok, replace the trans solenoid pack, it has an internal failure

Apr 12, 2010 | 2002 Dodge Durango

1 Answer

Code Reads PO733 & PO734, car runs great but these two codes show up when I check it out on my scanner. Any help or advice?


po733- gear 3 ratio incorrect, po734- gear 4 ratio incorrect. this is how to fix. You can try replacing the shift solenoids inside the transmission as long as the trans fluid is nice and clean looking. If the trans fluid is dark or burnt looking, it time for a new tranny

Mar 01, 2010 | 2002 Saturn S-Series

1 Answer

My 1998 dodge avenger automatic will not shift out of second what will cause this the computer i hooked it up to just gave me these codes po733, po700, po734 the motor is a 2.5


code po700 is what the pcm gets from the tcm when there is a problem with the transmission-anywhere from fluid level, sensor, solenoid, tcm problem, or mechanical problem.
the situation you have with the car being in 2nd gear is called "limp-in" mode. so you can limp-in to a repair center.

Mar 02, 2009 | 1998 Dodge Avenger

Not finding what you are looking for?
1998 Volvo S70 Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...