Question about 1992 Saturn SC

1 Answer

Can you show me a picture of diagram of engine of saturn 1992 sc i need to know where the altinator is located

Posted by on

  • 1 more comment 
  • keeper4u123 Jun 23, 2009

    can you tell me how to tighten the altinator belt?

    on my 1992 saturn sc i just checked to see where you said it was and realized the belt could be slipped right off ....maybe i dont need a new altinator ? what do you think and thank you for your speedy reply awsome!!

  • yadayada
    yadayada May 11, 2010

    JACK THE CAR UP, REMOVE THE NEGATIVE WIRE CABLE FROM THE BATTERY, REMOVE THE PASSENGER SIDE TIRE AND THE FRONT INNER FENDER (PLASTIC). ONCE THESE ARE REMOVED THERE ARE ONLY 2 BOLTS AND ITS OUT. BUT, IT CAN BE FINANGLED THROUGH THE ENGINE BAY WITHOUT REMOVAL OF EITHER BUT ITS A TIGHT FIT

  • yadayada
    yadayada May 11, 2010

    TRY A GOGGLE SEARCH

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 193 Answers

You should see it if you stand in front of car, look at the belts behind radiator fan, look to the top of those belts and it should be to the left with a belt hooked to it.

Posted on Jun 23, 2009

  • Nathan Jun 24, 2009

    The alternator slides back and forth you should see what its slide on behind it and it needs to be all the way to the end to tighten the belt, all you need is a socket and ratchet.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just Replaced the Water Pump....Still wont start??? If my Water Pump goes out while driving and I attempt to start the car several times, does this cause valve damage or any kind of damage?


Pulling plug wirs is a big mistake unless you know what your doing and you don't sound like you do. It sound like a frost plug is corroded away. You should be able to start your engine even if it had no coolant at al. the coolant only cools the engine ,it does not stop it from running.Now you need a wiring diagram for your engine to see if you have the wires in the right place.......otherwise the engine will not start ever.Worse case ....it could be a head gasket and if that is the case give it to someone whom wants a free car to work on themselves...............Ken

Jul 08, 2012 | 1992 Saturn SC

1 Answer

I got a 1992 Saturn SC2. Someone, unsuccessfully


There is a nice video on this over on youtube. Shows the guy pulling off the plastic covers and removing the lock cylinder. You can buy a new one from a dealer, cost about 65.00 and you have to get it keyed, but I think you can buy a generic GM lock cylinder with a key from autozone or advance.

Note I have had an official saturn lock cylinder sitting at a Chevy dealer for a week now as they can not figure out how to key it. Nice to have your keys match the doors and trunk. If you go with a generic one your new ignition key will not match your doors and trunk.

Jun 28, 2010 | 1992 Saturn SC

2 Answers

Altinator belt


The belt, most likely is shot...just get it replaced. Your car comes equipped with a "tensioner" pulley that keeps the belt tight all the time. Unless you have mechanical experience, I really do NOT recommend trying this job at home...Just DON'T GO TO THE DEALERSHIP!
Good Luck

Jun 23, 2009 | 1992 Saturn SC

2 Answers

I am trying to locate the starter relay on a 92 saturn?


the starter is at the bottom back of the engine (aft of oil filter), it goes into the transmission bell housing, go to link for video of job on your car.
http://www.wonderhowto.com/how-to/video/how-to-replace-the-starter-in-a-saturn-s-series-car-263194/

Jun 18, 2009 | 1992 Saturn SC

1 Answer

1992 Saturn SC Fuel Pump Problem


You need to get the schematic / wiring diagram . There is a junction block in the center console where the wiring is routed to the entire car. The contact on the power wire to the pump gets burned /dirty and becomes intermittant . It needs to be cleaned .This happened to me twice.

Feb 10, 2009 | 1993 Saturn SC1

3 Answers

Replace the Evaporator Core in a 1994 Saturn SC1


If you go to your local Auto Parts store (Advanced Auto, Auto Zone, Pepboys) get the Haynes Manual for your car it tell you step by step and has some pictures too........very helpful

Jul 04, 2008 | 1994 Saturn Sc

2 Answers

Saturn sc 2 seatbelt fuse


The fuse is in the center console, left side of passenger footwell. It is labelled PREST. for passive restraints. Possibly check the restraint module located in the center console, just under the E-brake lever.

Jul 02, 2008 | 1992 Saturn SC

Not finding what you are looking for?
1992 Saturn SC Logo

Related Topics:

674 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...