Question about 1995 Honda Accord

1 Answer

1995 honda accord v6 tack jumps sometimes, but sometimes fine.

When the tack does start to jump, and gets to 0 rms the car starts to miss. Changed sparkplugs/wires distributor cap, and rotor, fuel filter, and added Lukus injection cleaner. Could it be a grounding problem, or a sensor.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Honda Master
  • 3,433 Answers

It is what you call hunting. Carb or throttle body injection?. more than likely TBI. Could be the throttle position sensor,The mass air flow sensor, fuel pressure regulator. have the fuel pressure ck'd first.. then the throttle position sensor. then the maf sensor. Have the maf sensor cleaned, They are very expensive. Make sure the air cleaner is clean, clean. it and the maf work together. - good luck, Ned

Posted on Jun 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 91 Dodge Ram power 50 pick up truck it turns but won't start. I changed the fuel filter, cap and rotar, spark plugs and wires.


Hi,have you tryed testing the coil,to see if it has a spark,you should check sparkplug,then h,t,leads and distibuter cap,then the l,t,lead that runs from coil to distributor, and rotor,then,check the distributors getting power then ciol,then power to the coil,hope this was some help,all the best.

Sep 06, 2015 | Dodge Cars & Trucks

1 Answer

My 2000 Nissan frontier runs great for about 15 minutes then starts sputtering tach starts jumping. Changed distributor cap & rotor button plug wires fuel filter & crank shaft position sensor. What...


I would want to monitor fuel pressure as the engine warms up. But it could also be a coil or ignition module problem, even a relay.
Any chance the check engine light is on ?

Jul 23, 2013 | Cars & Trucks

1 Answer

1992 ford f-150 cranks wont start


I believe that motor still uses a distributor cap, rotor, and seperate coil...it has to be no spark...inspect the cap and rotor for hairline cracks...remove the coil, (Connected to center wire on distributor cap) and have tested...Hope this helps.

Jun 01, 2012 | 1992 Ford F150 SuperCab

1 Answer

1993 jeep cherokee won't start


MAKE SURE DISTRIBUTOR CAP ,ROTOR, SPARKPLUGS AND WIRES, OKAY IF ALL HAS BEEN REPLACED.IF NOT GETTING SPARK PROBLEM COULD BE IGNITION COIL FAULTY, ASD RELAY FAULTY,DISTRIBUTOR WITH CAMSHAFT SENSOR FAULTY OR YOU HAVE FAULTY PCM. CODE SCAN VECHICLE FOR FAULT CODE, IF YOU ARE GETTING SPARK PROBLEM IN THE FUEL SYSTEM, CHECK FUEL PUMP RELAY AND FUSE MAKE SURE FUEL FILTER BEEN CHANGED AND FUEL PRESSURE IS 39 - 41 PSI. CHECK FOR FUEL SPARK SEE WHAT GOING ON, VECHICLE NEEDS FUEL OR SPARK TO RUN IF ONE NOT WORKING ENGINE WILL NOT START.

Oct 31, 2011 | 1993 Jeep Grand Cherokee

1 Answer

I am trying to start my engine on my 1985 4runner it turns over but doesnt catch on.. what should I do..


'85's mostly had 4 cylinder engines, 22R, 22RE and 22REI. Remove a sparkplug wire and stick a sparkplug into the end. Hold the sparkplug, preferably with a well insulated glove, against a good metal part (exhaust manifiold will do, no paint or rust) nearby being carefull to stay clear of the fan. Now have someone turn the key and when the engine turns, see if a spark is jumping across the sparkplug your are holding...snap,...snap..snap....is what you should see and hear. If not, your ignition is not creating spark. Remove the center wire of the distributor and try to put the sparkplug on the end of that wire and repeat the previous test. If you get spark that means the distributor cap is not transferring the spark thru it to the wires that go down to your sparkplugs. Remove and replace the distributor cap and the rotor inside paying special attention to mark the wires and where they plug into the cap. The rotor only goes on one way, same with the cap. If you dont get spark coming to the center wire of the distributoe cap your ignitin module may be bad, a good time to have a shop run a test on it. Before heading to the shop, be sure to check your fuses. Maybe you should do that first as it is the simplest. If you have spark at the sparkplug and still no starting, a small amount of gasoline poured into the intake ( please dont pour a cup of gas into it! Just a spoonfull or so). With the sparkplug wires inplace, crank the motor. If it kicks and then goes back to cranking with no results, your fuel isnt getting to the intake. Could be a fuel pump (common) or a plugged fuel filter. The filter is easy, replace it. To test for fuel pressure you will need to locate the fuel line coming to the intake, carburated or injected, the inlet can be loosened and have someone turn the key on and you should see some fuel leaking around the fitting you only loosened. DO NO REMOVE IT-JUST LOOSEN. If you have fuel pressure your problem needs a mechanic. If no fuel pressure it's time to check the fuel pump thru the access panel under the backseat. BE SURE TO TIGHTEN THE INLET FUEL FITTING AT THIS POINT. Good luck.
REMEMBER- GASOLINE IS VERY DANGEROUS. DO NOT PERFORM THESE DIAGNOSTICS UNLESS YOU FEEL TRAINED ENOUGH TO DO SO AND ALWAYS WITH AN EXTINGUISHER ON HAND.

Apr 09, 2010 | 1985 Toyota 4Runner

3 Answers

Hesitation & missing


distributor under the rotor and cap, if not the rotor and cap (or ignition pack-coil if its not cap and rotor.)

Aug 16, 2009 | 1993 Chevrolet Lumina

1 Answer

Part time miss


Sound like you coil is going out. Need to replace the coil and go ahead and do a complete tuneup, plugs, plug wires, distributer cap & rotor button. It will run like new, plus a can of SEAFOAM for the gas tank to clean to fuel system.

Jul 11, 2008 | 1989 Chevrolet S-10 Blazer

Not finding what you are looking for?
1995 Honda Accord Logo

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...