Question about Toyota Camry
I change key in my car it sart but not idle it did only when I disconnect the battery and put the battery back,but I stop the car again and them it will do the same think just start but not idle
I'm unclear about your question but Ill take a shot and say it could be a M.A.F. censor located on the hose going to your air filter box but you should get your battery and charging system tested first before you do anything else, most anywhere will do this for free
Posted on May 15, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: security system/battery
plz check the following and update me
1. Fuel (To be exact proper air/fuel ratio, normally it is about 14/1)
2. Spark (in appropriate moment)
3. Proper timing (the valves should open and close only in appropriate time)
4. Compression in the cylinders (Normal compression is 120 - 170 psi. The engine won't start if the compression is lower than 70 - 80 psi.)
Posted on Jul 14, 2008
1....ensure the battery in the "Key Fob" is OK............Press either Lock or Unlock button for more than 1 second, the lamp on the fob will light if OK. Change battery if it does not illuminate!
2.....if battery on fob OK.......Re Syncronise the key fob to the car by:.... a brief press on either button twice and within 30 seconds turn Key to position 2 on the ignition lock
Hope that fixes it...let me know?
Posted on Nov 13, 2008
YOUR WIRELESS CONTROL MODULE(SENTRY KEY MODULE)MAY BE ELECTRICALLY LOCKED UP..THERE IS A SERVICE BULLETIN FROM CHRYSLER..YOU CAN REMOVE IOD FUSE IN FUSEBLOCK(UNDERHOOD BEHIND AIR CLEANER..IGNITION OFF DRAW(IOD)THIS WILL RESET WIRELESS CONTROL MODULE AND VEHICLE SHOULD START AND LOCKS RESPOND AGAIN..IF IT DOES,THE WCM WILL HAVE TO BE REPLACED AND THIS NEEDS TO BE DONE BY DEALER
Posted on Jun 14, 2009
Tips for a great answer:
Dec 21, 2015 | Cars & Trucks
You can in most cases repair this slow speed stall or unstable idle by cleaning the engine throttle valve and the idle speed control valve using a product called CRC Spray Throttle valve cleaner. Spray the cleaner into the air intake of the engine with the hose removed from the throttle body, the engine will try to stall so hold up the idle speed manually. Once you have used up about 1/2 can of the cleaner stall the engine out while spraying and turn the key off, disconnect the negative battery cable for 5 minutes and then reconnect and drive the car for a about 25 miles of varied driving modes. If this doesn't cure the problem you may need the fuel injectors professionally cleaned by the dealer service dept.
May 19, 2017 | Mercedes-Benz Mercedes 190E 2.3-16 Diecast...
Oct 27, 2013 | Mercedes-Benz E-Class Cars & Trucks
Oct 06, 2013 | 1995 Toyota Previa
Oct 01, 2013 | 2007 Mercedes-Benz ML320 CDI
Feb 06, 2013 | 2005 Chevrolet Malibu
Feb 23, 2011 | 1994 Toyota Pickup
Jul 14, 2010 | 2007 Mercedes-Benz ML320 CDI
Nov 15, 2009 | Mercedes-Benz ML320 Cars & Trucks
Mar 01, 2009 | 2007 Mercedes-Benz ML320 CDI
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: