Question about Cars & Trucks

Open Question

My 1995 Plymouth Voyager 3.3 engine engine system fuse keep blowing

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: 98 PLYMOUTH GRAND VOYAGER WONT START - BLOWS ENG FUSE - HELP

You have a shorted engine harness, this is not common but it does happen, heat and engine movement cause damage to the harness, this is most common on hi miler cars and vans, the only way to fix it is to start by looking anywhere the harness rubs, that is where the damage occurs.

Posted on Oct 20, 2008

motor1258
  • 6674 Answers

SOURCE: 1998 plymouth grand voyager cruise control relay/fuse location?

Check under hood in box marked fuses & relay, on drivers side and look under cover of it for I.D.

Posted on Apr 11, 2009

ourhowse
  • 2007 Answers

SOURCE: My 1995 Plymouth Voyager loses power, surges and backfires.

My first instinct tells me timing chain or belt, but it could be a vacuum line loose, cracked or disconnected. Using a stethoscope, or a length of gasline hose held to your ear, and with the engine running, listen for a hissing sound. Be sure and wiggle all the hoses you can. You might make one hiss. If you don't find anything, get a timing light, and check your timing marks. They should stay in basically one spot. If it's jumping around a lot, you need a new timing chain or belt. Good luck.

Posted on May 01, 2009

  • 880 Answers

SOURCE: heater blows cold air 1995 plymouth voyager

With the engine cold & the radiator full remove the radiator cap and start the engine. Let the engine reach operating temperature which will open the thermostat. When it opens the water in the radiator will start circulating if the pump & thermostat are operating properly. If all is ok replace the cap and turn the temperature lever on the heater to hot If you still have no heat check the heater valve on the engine firewall. Open it manually and see if you have heat. If yes check the cable from the velve to the temperature lever.

Posted on Jan 03, 2010

  • 1244 Answers

SOURCE: my horn and lighter does not work plymouth voyager 1995

horn is either the horn relay itself of the horn ground or horn lighter assmbly just needs to be changed out

Posted on Jan 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 plymouth voyager engine fuse keeps blowing every couple dayswhy


Likely a bad component (like a relay) or corrosion built up in a wire or connection causing a High Amperage load on the circuit.

These are normally not easy to find, and all the work is manual testing of components for load values, voltage drop, and visual inspections.

Mar 07, 2015 | 1999 Plymouth Voyager

1 Answer

Engine fuse keeps blowing. what does it supply power to and most commoncause for this to happen.


the only reason that fuses keep blowing is excessive current usage through them
It is from shorts in the units after the fuse, faulty units after the fuse, too many extra accessories tagged into the circuit. It normally supplies power to all the engine circuit items (ignition, starter relay, alternator, accessories and anything else connected to the ignition switch

Jul 04, 2014 | 1996 Plymouth Voyager

1 Answer

Engine fuse keeps blowing. what does it supply power to?


Possible causes:
- Fuse is under rated power.
- Short circuit in wiring harness.
- Any of the components may be drawing more current, for example fuel pump circuit, ignition system circuit, relays, blower motor, fuel system circuit and charging circuit etc.

Jul 04, 2014 | 1996 Plymouth Voyager

1 Answer

20 amp engine keeps blowing and shutting down engine


You may need a shop manual to get the wiring diagrams to troubleshoot this.
If that fuse powers the ASD relay, it handles the computer, the ignition coil, the injectors, and the O2 sensors.
The wiring diagrams I have show the fuses as numbered not named.

Sep 25, 2012 | Cars & Trucks

1 Answer

Engine fuse keeps blowing causing van to shut off


For the engine fuse to blow the the nearest ground that affects the engine fuse is the heater circuit of the 02(oxygen sensor) the harness has rub through you will have to open the the harness and inspect 3_25_2012_4_50_46_pm.jpg

Mar 22, 2012 | 1996 Plymouth Voyager

1 Answer

My horn and lighter does not work plymouth voyager 1995


horn is either the horn relay itself of the horn ground or horn lighter assmbly just needs to be changed out

Jan 14, 2010 | 1995 Plymouth Voyager

1 Answer

MY REAR WIPER KEEPS BLOWING FUSES. 1995. PLYMOUTH GRAND VOYAGER . NEXT. MY NISSAN 2000 XTERRA HAS SLOWLY GOTTEN WORSE AND WORSE FUEL MILAGE. THE DEALER, AFTER COMPUTER ANALYSIS SAYS NOTHING IS WRONG. I...


try doing a tuneup and do a fuel system treatment change fuel filter and airfilter if not already done. see if these help your problem on the nissan. on the voyager is sounds like it has a short in the motor pull rear panel off and is if a wire is grounding out causing the problem

Aug 30, 2009 | 1995 Plymouth Voyager

1 Answer

Clock spring on plymouth Voyager


i have a 96 voyager and i keep blowing the fuse for my fans could this be a clock spring issue

Mar 28, 2009 | 1997 Plymouth Grand Voyager

1 Answer

98 PLYMOUTH GRAND VOYAGER WONT START - BLOWS ENG FUSE - HELP


You have a shorted engine harness, this is not common but it does happen, heat and engine movement cause damage to the harness, this is most common on hi miler cars and vans, the only way to fix it is to start by looking anywhere the harness rubs, that is where the damage occurs.

Oct 15, 2008 | 1998 Plymouth Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...